This study investigates methods to enhance the efficiency of CO₂ capture using organic amine absorption and compares the performance of traditional and novel amine solvents. It reviews various single-component and mixed amine absorbents, as well as catalysts used in these methods, highlighting the superiority of mixed amine absorbents over single-component amine absorbents in CO₂ absorption and desorption. Additionally, the study explores the catalytic mechanisms and effects of catalysts in the CO₂ absorption/desorption process with amine solvents and provides an outlook on future research directions. The aim is to promote the widespread adoption of organic amine absorption technology in industrial applications and to contribute to the development of more sustainable and efficient CO₂ capture technologies.

3d transition metal oxides composed of Mn, Fe, Co, and Ni have emerged as promising candidates for supercapacitor electrode materials due to their high theoretical specific capacitance, abundant redox-active sites, variable oxidation states, environmental friendliness, and low cost. Various synthesis strategies have been developed to fabricate these nanostructures, including hydrothermal/solvothermal methods, sol–gel processing, and microwave-assisted synthesis. Among them, microwave irradiation technology, with its rapid heating characteristics and unique thermal/non-thermal effects, offers significant advantages in controlling crystallinity and particle size distribution, suppressing particle agglomeration, and enhancing material purity. Furthermore, microwave effects facilitate the self-assembly and morphological evolution of transition metal oxides, promote the formation of crystal defects, and strengthen interfacial interactions. These effects enable precise microstructural tuning, leading to an increased specific surface area and a higher density of active sites, ultimately enhancing specific capacitance, rate capability, and cycling stability. In recent years, microwave-assisted synthesis has made significant progress in constructing 3d transition metal oxides and their composites, particularly in the development of single-metal and binary-metal oxides, as well as their hybrids with carbon-based materials (e.g., graphene and carbon nanotubes) and other metal oxides. This review systematically summarizes the research progress on microwave-assisted techniques for 3d transition metal oxide-based nanomaterials, with a particular focus on the role of microwave effects in morphology control, interfacial optimization, and electrochemical performance enhancement. Additionally, key challenges in current research are critically analyzed, and potential optimization strategies are proposed. This review aims to provide new insights and perspectives for advancing microwave-assisted synthesis of 3d transition metal oxides in energy storage applications.

In recent years, liquid–solid triboelectric nanogenerators (L-S TENGs) have been rapidly developed in the field of liquid energy harvesting and self-powered sensing. This is due to a number of advantages inherent in the technology, including the low cost of fabricated materials, structural diversity, high charge-energy conversion efficiency, environmental friendliness, and a wide range of applications. As liquid phase dielectric materials typically used in L-S TENG, a variety of organic and inorganic single-phase liquids, including distilled water, acidic solutions, sodium chloride solutions, acetone, dimethyl sulfoxide, and acetonitrile, as well as paraffinic oils, have been used in experiments. However, it is noteworthy that the function of multiphase liquids as dielectric materials is still understudied. The “Multiphase Liquid Triboelectric Nanogenerator Prototype (ML-TENG Pro)” presented in this paper takes a single-electrode solid–liquid triboelectric nanogenerator as the basic model and uses lubricating oil and deionized water as dielectric materials. After verifying the stability of single-phase liquid materials (e.g., DI water, seawater, ethanol, etc.) for power generation, the power generation performances of oil–water two-phase, gas–oil–water three-phase (with a small number of bubbles), and gas–oil–water three-phase (with many bubbles) in open space are further investigated. COMSOL Multiphysics 6.0 software was used to investigate the material transport mechanism and formation of oil–water two-phase and gas–oil–water three-phase. Finally, this study presents the power generation performance of ML-TENG Pro in the extreme state of gas–oil–water three-phase “emulsification”. This paper outlines the limitations of the ML-TENG, named PRO, and suggests avenues for future improvement. The research presented in this paper provides a theoretical basis for evaluating the quality of lubricants for mechanical power equipment.

The demand for high energy density in mobile devices (including vehicles and small ships) is increasing. Nickel–Manganese–Cobalt (NMC) ternary, as a battery cathode material, is increasingly being applied because of its higher energy density relative to LiFePO₄ or other traditional materials. But NMC also faces challenges, such as a high degeneration rate and heat generation. So these aspects of Ni content must be clarified. In the current study, two Ni-content battery cells were tested, and the results of other composition cathode cells from the literature were compared. And three typical Ni-content batteries were simulated for searching Ni effects on performance, capacity fade and heat generation. Some findings were achieved: (1) from 0.8 Ni content, it can be seen that the specific capacity growth rate (slope) was much greater than before; (2) cathode materials that have an odd number (that does not surpass 0.7) of Ni content showed a linear capacity degradation trend, but others did not; (3) the Li concentration within material particles did not correspond to absolute stress value but stress temporal gradient; and (4) during discharge, lower Ni content made the heat peak occur earlier but lowered the absolute value; the irreversible heat increased with Ni content non-linearly, so that the higher the Ni content went up, the higher the increase rate of the irreversible heat ratio. Thus, the results of this study can guide the design and application of high energy batteries for mobile devices.

Non-stoichiometric spinel Mn _0.5 Co _2.5 O ₄ porous nanowire array electrodes were successfully synthesized via a microwave-assisted hydrothermal method combined with defect engineering.

In the present study, detailed comparative experiments on a heavy-duty diesel engine used in the world harmonized transient cycle (WHTC) and road spectrum reversely deduced cycle (RSRDC, which was derived from a road test) were carried out. Fuel consumption and gaseous and particulate pollutants, along with some engine operation parameters, were measured transiently; thus, specific emissions can be calculated. Results showed that the BSFC of WHTC and RSRDC was 201.8 and 210 g/kW·h, respectively, because the real road driving cycle (RSRDC) had wider operating point distributions and more points located in the low-efficiency zone relative to WHTC. Thus, WHTC operations exhibited higher raw CO (abundant CO formation needed a specific temperature threshold) and NOx but lower HC. Furthermore, with aftertreatment, all pollutants met the newest China regulation limit. Finally, transient emissions were analyzed in detail. Although the specific emissions of some pollutants were similar in value for both cycles, transient processes may largely be different. Therefore, the current study is meaningful, and we not only provide broad and detailed information but also directly compare two types of operations (one is a real road driving cycle) in the laboratory: this is rarely discussed in the literature.