Paraloid^® is one of the most frequently used acrylic polymers, employed mainly for its adhesive and consolidating properties in the conservation of a wide range of materials. Appreciated for its reversibility, mechanical characteristics and ease of use, application of the polymer requires it to be simply dissolved in a solvent. Nevertheless, the chemical nature of the relevant solvent must be regarded as an essential parameter, due to its influence on the physico-chemical characteristics of the resulting adhesive film. The aim of this study was to evaluate the effect of the solvents used with Paraloid^® acrylic resin on adhesive film properties, and more specifically on their thermophysical characteristics. Two compounds used in conservation (Paraloid^® B72 and B44) and six solvents (ethanol, acetone, ethyl acetate, ethyl lactate, butyl acetate and toluene) were used to make adhesive film replicates. Thermogravimetry and differential scanning calorimetry (DSC) analyses allowed us to determine the value of the glass transition temperature (Tg) of solvent/Paraloid^® mixtures. Mass monitoring of the films enabled us to correlate Tg values with the quantity of residual solvent. Results showed that all the solvents remained present for a long time in Paraloid^® films when drying took place at room temperature. Moreover, DSC analysis highlighted the fact that residual solvent had a considerable impact on the value of film Tg. In fact, residual solvent significantly lowered the Tg value of Paraloid^® (by up to 30 °C below its theoretical value). This underlined the importance of taking the impact of solvent on resin properties into account.

In the general global rise of attention and research to seek greener attitudes, the field of cultural heritage (CH) makes no exception. In the last decades, an increasing number of sustainable and biologically based solutions have been proposed for the protection and care of artworks. Additionally, the safety of the target artwork and the operator must be kept as core goals. Within this scenario, new products and treatments should be explored and implemented in the common conservation praxes. Therefore, this review addressing metal heritage is aimed to report biologically derived gel formulations already proposed for this specific area as reliable tools for cleaning. Promising bio-gel-based protocols, still to be implemented in metal conservation, are also presented to promote their investigation by stakeholders in metal conservation. After an opening overview on the common practices for cleaning metallic surfaces in CH, the focus will be moved onto the potentialities of gel-alternatives and in particular of ones with a biological origin. In more detail, we displayed water-gels (i.e., hydrogels) and solvent-gels (i.e., organogels) together with particular attention to bio-solvents. The discussion is closed in light of the state-of-the-art and future perspectives.

Currently gels are widely used in the restoration of paintings, graphic arts, stuccowork and stonework, but their use in metal restoration is less widespread. In this study, several polysaccharide-based hydrogels (agar, gellan and xanthan gum) were selected for use in metal treatments. The use of hydrogels allows to localize a chemical or electrochemical treatment. This paper presents several examples of treatment of metal objects of cultural heritage, i.e., historical or archaeological objects. The advantages, disadvantages and limits of hydrogel treatments are discussed. The best results are obtained for the cleaning of copper alloys via associating an agar gel with a chelating agent (EDTA (ethylenediaminetetraacetic acid) or TAC (tri-ammonium citrate)). The hot application allows to obtain a peelable gel, particularly adapted for historical objects. Electrochemical treatments using hydrogels have been successful for the cleaning of silver and for the dechlorination of ferrous or copper alloys. The use of hydrogels for the cleaning of painted aluminum alloys is possible but it has to be coupled with mechanical cleaning. However, for the cleaning of archaeological lead, the cleaning using hydrogels was not very effective. This paper shows the new possibilities of using hydrogels for the treatment of metal cultural heritage objects: agar is the most promising hydrogel.

In the last decade, there has been an increase in research related to green corrosion inhibitors for conservation of metals cultural heritage to help promote sustainable practices in the field that are safe, environmentally friendly, and ecologically acceptable. The most common are organic substances derived either from natural and/or biological sources: plant extracts and oils, amino acids, microorganisms, and biopolymers. The chapter will provide a review of these substances as corrosion inhibitors for metals conservation, by discussing the state-of-the-art research to date, with a special focus on cysteine. Most of the research has focused on the examination of such inhibitors on metal coupons with or without corrosion products using electrochemical techniques or weight-loss measurements to determine their effectiveness. Some of these studies have also considered the conservation principles for practice, i.e., reversibility of the treatment and the visual aspect of the modification of the treated metal surface. However, before such green inhibitors can be routinely applied by conservators, more research is required on their application to real artefacts/monuments using in situ corrosion measurements. Furthermore, given that the composition of a green inhibitor is highly dependent on its extraction process, research must also involve identifying the specific adsorption models and involved mechanisms to ensure reproducibility of results.

In the field of cultural heritage, the use of natural gels is rising for the application of active agents. Here, two natural polymers are assessed: agar, a pioneer hydrogel for conservation treatments, and chitosan, a rather novel and metal-binding gel. For chitosan, a state-of-the-art based formulation (CS–ItA–LCys) is evaluated as it was reported for silver-complexing properties. It is evaluated whether these polymers can withstand the addition of the chelating compound deferoxamine, which is a bacterial siderophore. This allows for the obtainment of completely bio-sourced gel systems. A Fourier-transformed (FT) infrared spectroscopy characterization is performed, completed with rheological measurements and Cryo-Scanning Electron Microscopy (cryo–SEM) to investigate the physico–chemical properties of the gels, as well as their interaction with deferoxamine. Both polymers are also tested for their inherent complexing ability on silver ions using FT–Raman spectroscopy. A multi-analytical comparison shows different microstructures, in particular, the presence of a thick membrane for chitosan and different mechanical behaviors, with agar being more brittle. Neither hydrogel seems affected by the addition of deferoxamine; this is shown by similar rheological behavior and molecular structures in the presence or absence of the chelator. The intrinsic abilities of the chitosan formulation to make silver complex are demonstrated with the observation of two peaks characteristic of Ag–S and Ag–O bonds. Agar and chitosan are both proven to be reliable gels to act as carriers for bio-based active agents. This paper confirms the potential asset of the chitosan formulation CS–ItA–LCys as a promising gel for the complexation of soluble silver.