Entesar A. Ganash

Dr. Entesar A. Ganash

King Abdulaziz University, Jeddah, Makkah al Mukarramah, Saudi Arabia
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 November 2019 in Materials Research Express
Verified
Journal Article
Open access
PDF file
EGEntesar A. Ganash
Entesar A. Ganash
GAGhaliah A Al-Jabarti
Ghaliah A Al-Jabarti
RAReem Mohammad Altuwirqi
Reem Mohammad Altuwirqi
Pulsed Laser Ablation in liquid (PLAL) is considered as a robust and simple technique for producing nanoparticles (NPs) using lasers. The carbon-based nanoparticles were fabricated via the PLAL approach by irradiating a graphite target with a pulsed Nd:YAG laser of wavelength 532 nm. The graphite target was immersed in distilled water and irradiated for 10 min. The pulse length, reputation rate, and fluence were 6 ns, 10 Hz, and 0.4 J cm−2, respectively. The structural and physical properties of the synthesized NPs were investigated and analyzed using different characterization methods. For example, Transmission Electron Microscopy (TEM) images revealed diverse carbon nanostructures such as graphene nanosheets, nanospheres, nanospheres in the shape of a necklace, and nanotubes. The spectrum of Energy Dispersive X-Ray spectroscopy (EDX) confirmed successful synthesis of high purity carbon nanostructures. Moreover, the result of X-Ray Diffraction (XRD) Spectroscopy indicated the presence of reduced Graphene Oxide (rGO) with a (002) plane and the absence of Graphene Oxide (GO). The transmission spectrum from Ultraviolet-Visible (UV–vis) analysis showed a strong trough at 266 nm which is attributed to the presence of carbon nanostructures. Furthermore, Fourier-Transform Infrared Spectroscopy (FTIR) analysis demonstrated the vibration bonds related to carbon. The nanostructures produced were semi-stable with little agglomeration as was inferred from the results of the Zeta Potential. Finally, the Dynamic Light Scattering (DLS) analysis supported the TEM results. PLAL technique is proved to be a simple method for producing carbon-based nanomaterials. Moreover, the laser fluence was found to be an important factor which affects greatly the type of nanostructures that could be synthesized during laser ablation.

20 December 2022 in Molecules
Verified
Journal Article
Open access
PDF file
Aisha A. GanashAisha A. Ganash
Aisha A. Ganash
SASahar Alshammari
Sahar Alshammari
EGEntesar A. Ganash
Entesar A. Ganash
In this study, gold nanoparticles (AuNPs) were electrodeposited on samples of a carbon-paste electrode (CPE) with different thicknesses. The prepared AuNPs were characterized using different analysis techniques, such as FTIR, UV–Vis, SEM, EDX, TEM images, and XRD analysis. The fabricated modified electrode AuNPs/CPE was used for the sensitive detection of Congo red (CR) dye. Electrochemical sensing was conducted using square-wave voltammetry (SWV) in a 0.1 M acetate buffer solution at pH 6.5. The proposed sensor exhibited high efficiency for the electrochemical determination of CR dye with high selectivity and sensitivity and a low detection limit of 0.07 μM in the concentration range of 1–30 μM and 0.7 μM in the concentration range of 50–200 μM. The practical application of the AuNPs/CPE was verified by detecting CR dye in various real samples involving jelly, candy, wastewater, and tap water. The calculated recoveries (88–106%) were within the acceptable range.

21 December 2022 in Laser Physics Letters
Verified
Journal Article
Closed access
EGEntesar A. Ganash
Entesar A. Ganash
Pulsed laser ablation in liquid (PLAL) is an important method for synthesizing metal nanoparticles (NPs). Recently, it has garnered increasing interest as it is simple, rapid, and ecofriendly. Herein, PLAL is proposed as an approach to produce varied sizes of silver nanoparticles (Ag NPs) because NP size plays a vital role in their characteristics and several applications in the physical, chemical, biological, and medical fields. In PLAL, metal NP size could be controlled by either adjusting the laser parameters, such as wavelength, energy, fluence, reptation rate, ablation time, and focusing lens, or by modifying the ablation solvent properties. Herein, PLAL is proved as an effective and simple method for fabricating Ag NPs. This can provide guidance for synthesizing nanomaterials in diverse sizes, types, and shapes for applications in different fields.

30 April 2021 in Materials
Verified
Journal Article
Open access
PDF file
EGEntesar A. Ganash
Entesar A. Ganash
RAReem Mohammad Altuwirqi
Reem Mohammad Altuwirqi
In this work, silver nanoparticles (Ag NPs) were synthesized using a chemical reduction approach and a pulsed laser fragmentation in liquid (PLFL) technique, simultaneously. A laser wavelength of 532 nm was focused on the as produced Ag NPs, suspended in an Origanum majorana extract solution, with the aim of controlling their size. The effect of liquid medium concentration and irradiation time on the properties of the fabricated NPs was studied. While the X-ray diffraction (XRD) pattern confirmed the existence of Ag NPs, the UV–Vis spectrophotometry showed a significant absorption peak at about 420 nm, which is attributed to the characteristic surface plasmon resonance (SPR) peak of the obtained Ag NPs. By increasing the irradiation time and the Origanum majora extract concentration, the SPR peak shifted toward a shorter wavelength. This shift indicates a reduction in the NPs’ size. The effect of PLFL on size reduction was clearly revealed from the transmission electron microscopy images. The PLFL technique, depending on experimental parameters, reduced the size of the obtained Ag NPs to less than 10 nm. The mean zeta potential of the fabricated Ag NPs was found to be greater than −30 mV, signifying their stability. The Ag NPs were also found to effectively inhibit bacterial activity. The PLFL technique has proved to be a powerful method for controlling the size of NPs when it is simultaneously associated with a chemical reduction process.

1 November 2020 in International Journal of Photoenergy
Verified
Journal Article
Open access
PDF file
MAMaryam Alqurashi
Maryam Alqurashi
RAReem Mohammad Altuwirqi
Reem Mohammad Altuwirqi
EGEntesar A. Ganash
Entesar A. Ganash
With the gradual reduction of fossil fuels, it is essential to find alternative renewable sources of energy. It is important to take advantage of substitutes that are less expensive and more efficient in energy production. Photovoltaic concentrators (CPVs) are effective methods through which solar energy can be maximized resulting in more conversion into electrical power. V-trough concentrators are the simplest types of low-CPV in terms of design as it is limited to the use of two plane mirrors with a flat photovoltaic (PV) plate. A consequence of concentrating more solar radiation on a PV panel is an increase in its temperature that may decrease its efficiency. In this work, the thermal profile of the PV plate in a V-trough system will be determined when this system is placed in different geographical locations in Saudi Arabia. The simulation is conducted using COMSOL Multiphysics software with a ray optics package integrated with a heat transfer routine. The 21st of June was chosen to conduct the simulation as it coincides with the summer solstice. The employment of wind as a cooling method for V-troughs was investigated in this work. It was found that with the increase in wind speed, the PV panel temperature dropped significantly below its optimum operating temperature. However, due to the mirrors attachment to the PV panel, the temperature distribution on the surface of the panel was nonuniform. The temperature gradient on the PV surface was reduced with the increase of wind speed but not significantly. Reducing the size of the mirrors resulted in a partial coverage of solar radiation on the PV surface which helped in reducing the temperature gradient but did not eliminate it. This work can assist in testing numerous cooling models to optimize the use of V-troughs and increase its efficiency especially in locations having high ambient temperatures.

29 March 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MAMaryam Alqurashi
Maryam Alqurashi
EGEntesar A. Ganash
Entesar A. Ganash
RAReem Mohammad Altuwirqi
Reem Mohammad Altuwirqi
The use of photovoltaic (PV) systems presents a great solution to high energy demand. Many factors limit the output of PV systems. One method of increasing the output of PV systems is to employ concentrators. The function of these concentrators is to increase the amount of solar radiation falling on a PV panel using optical devices. In this work, a simulation of a low concentrated photovoltaic system (LCPV) (V-trough model) will be conducted using COMSOL Multiphysics software package. The ray-tracing technique, based on the finite-element method, was used to study the performance of a V-trough without the incorporation of a tracking system. By investigating the effect of the mirrors’ inclination angles on the performance of the system, the optimum inclination angles were determined. The simulation was done for a non-tilted concentrator photovoltaic (CPV) system if placed in different geographical locations in Saudi Arabia with the inclination of the mirrors being changed every hour of the daylight. It was found that the concentration ratio of the suggested model increased for the city of Jeddah, for example, by 171% and 131% for double and partial coverage cases, respectively. In order to reduce the operation cost, the simulation was repeated with the restriction of the mirrors’ inclination to only three positions during the day. The concentration ratio decreased in this case by not more than 14%. When mirrors were fixed throughout the day, the concentration ratio dropped to about 50%. Such simulations will assist in investigating different designs of PV systems prior to their manufacturing. In addition, it could assist in determining the best geographic location for such CPV systems.