Image encryption is essential for protecting sensitive visual data during transmission and storage. This article introduces a novel image encryption technique that utilizes three hyperchaotic systems: a memristor system, a hyperchaotic 7D system, and an Erbium-doped fiber laser-based system. The algorithm takes advantage of the complex dynamics and random-like behavior of these systems to implement a robust three-layer encryption process. In each layer, a pseudo-random number generator is used to construct an S-box and an encryption key, which are subsequently applied to the image data. The proposed encryption scheme is implemented in software using Wolfram Mathematica® version 13.1 and in hardware using an AMD Virtex-7 FPGA VC707, achieving encryption rates of 9.7 Mbps and 0.67 Gbps, respectively. Experimental results demonstrate the scheme’s effectiveness in terms of encryption quality, resistance to various cryptanalysis attacks, and a high computational efficiency. The proposed method shows significant potential for secure image transmission and storage applications.
The automation strategy of today’s smart cities relies on large IoT (internet of Things) systems that collect big data analytics to gain insights. Although there have been recent reviews in this field, there is a remarkable gap that addresses four sides of the problem. Namely, the application of video surveillance in smart cities, algorithms, datasets, and embedded systems. In this paper, we discuss the latest datasets used, the algorithms used, and the recent advances in embedded systems to form edge vision computing are introduced. Moreover, future trends and challenges are addressed.
19 February 2018 in IEEE Transactions on Vehicular Technology
This paper examines a symbolic numerical approach to optimize a vehicles track for autonomous driving and collision avoidance. The new approach uses the classical cost function definition incorporating the essential aspects of the dynamic state of the vehicle as position, orientation, time sampling, and constraints on slip angles of tires. The optimization processes minimize the cost function and simultaneously determine the optimal track by varying steering and breaking amplitudes. The current velocity of the vehicle is limited to a maximal velocity, thus, allowing a stable search of the optimal track. The parametric definition of obstacles generates a flexible environment for low and high speed simulations. The minimal number of influential optimization variables guarantees a stable and direct generation of optimal results. By the current new approach to control a vehicle on an optimal track, we are able to autonomously move the vehicle on an arbitrary track approximated by low order polynomials. The optimization approach is also able to deal with a variety of different obstacles and the corresponding optimal smooth obstacle path. The computations demonstrate the effective control of a four wheel vehicle in normal operation and exceptional obstacle avoidance with continuously differentiable obstacle avoidance tracks. Simulation tests are done using vehicles velocities of 3, 6, 7.6, 10, 12, and 18 m/s. At higher vehicles velocities, a mathematical-only approach is not sufficient and a mechanical intervention for tires is needed as a complimentary part to control the slip angle. The results shows that the cost function reached a considerably high average convergence-to-zero rate success in most of the tested scenarios.
Throughput, area and power optimized designs for the advanced encryption standard algorithm are proposed in this paper. The presented designs are suitable for the encrypt-only AES-128 algorithm. Both designs integrate pipelining and iterative architectures in one design. This is achieved through applying the concept of partial loop unrolling where iterations and multistage pipelining are used to optimize area, throughput and dynamic power consumption. The first design achieves a throughput of 34.08 Gbps, an operating frequency of 266.29 MHz with 521 slice registers. The second design achieves a throughput of 34.09 Gbps, 674 slice registers and a frequency of 266.33 MHz on a Xilinx 14.2 Virtex-5 XC5VLX50-3 FPGA device. Both designs consumes an approximate value of 455 mW of dynamic power using Vivado 2014.4 on Zynq-7000 XC7Z010clq225-3 FPGA device.
22 December 2022 in ACM Transactions on Reconfigurable Technology and Systems
The near-memory computing (NMC) paradigm has transpired as a promising method for overcoming the memory wall challenges of future computing architectures. Modern systems integrating 3D-stacked DRAM memory can be leveraged to prevent unnecessary data movement between the main memory and the CPU. FPGA vendors have started introducing 3D memories to their products in an effort to remain competitive on bandwidth requirements of modern memory-intensive applications. Recent NMC proposals target various types of data processing workloads such as graph processing, MapReduce, sorting, machine learning, and database analytics. In this article, we conduct a literature survey on previous proposals of NMC systems on FPGAs integrated with 3D memories. By leveraging the high bandwidth offered from such memories together with specifically designed hardware, FPGA architectures have become a competitor to GPU solutions in terms of speed and energy efficiency. Various FPGA-based NMC designs have been proposed with software and hardware optimization methods to achieve high performance and energy efficiency. Our review investigates various aspects of NMC designs such as platforms, architectures, workloads, and tools. We identify the key challenges and open issues with future research directions.
The emerging of IoT concept recently in our lives, has offered the chance to establish energy efficient smart devices, systems and cities. Due to the urging need for conserving energy, this paper proposes an IoT based energy efficient wireless smart metering system design. It competes with the existing meters as being a low cost completely integrated metering system. It offers an easily operated Android application for users as well as a Website and database for the electricity supplier company. The proposed system design has an accuracy level of 97% and it is about 25% lower cost than its peer in the global market. The proposed design reduced the power consumption by 16%.