TEOS–PDMS coating was synthesized without any organic solvent. While it exhibited good durability in high temperatures and abrasion tests, further refinement is necessary to mitigate the decline in hydrophobicity resulting from washing cycles.
A new biopolymer–silica hybrid material consisting of inulin and tetraethoxysilane (TEOS) for use as an adsorbent was successfully synthesized via the sol–gel method in acidic conditions. The hydrolysis and condensation processes were attained in water/ethanol solution. Three molar ratios of inulin:TEOS (1:1, 1:2, and 2:1) were prepared and dried at various temperatures (50, 60, and 70 °C). The optimized molar ratio of 2:1 with a drying temperature of 70 °C was found to obtain the best morphology and characteristics for absorbent properties. Fourier transform infrared spectroscopy (FTIR) analysis showed a strong interaction between inulin and TEOS, which was also observed using energy dispersive X-ray spectroscopy (EDX). Field emission scanning electron microscopy (FESEM) images revealed the presence of nanoparticles on the rough surface of the hybrid sol–gel. X-ray diffractometer (XRD) analysis showed the amorphous state of the silica network where the inulin existed as an anhydrous crystalline phase. Brunauer–Emmet–Teller (BET) analysis confirmed that the composite was mesoporous, with 17.69 m2/g surface area and 34.06 Å pore size. According to thermogravimetric analysis (TGA) results, the hybrid inulin-TEOS adsorbent was thermally stable under a temperature of 200 °C.
Conceptually, the present work leads to the synthesis of magnesium nanoparticles (MgO NPs) using pomegranate (Punica granatum L) rind extract for antibacterial fabric coating. The antibacterial performance of MgO NPs on cotton, polyester and blend wool types of fabric was evaluated towards three species of gram-positive bacteria; Staphylococcus epidermidis, Brevibacterium linens and Cutibacteriumacnes. Fourier transform infrared spectroscopy (FTIR) analysis confirmed the successful of sol-gel synthesis process with the presence of flavonoid compounds in MgO NPs solution. The breaking load test was run for all fabric samples, while for tearing strength test, it was carried out only for cotton and polyester fabrics. Air permeability test device was used to determine the air permeability of all fabric samples to ensure the ventilation of the fabrics after coating process. The MgO NPs produced from sol-gel synthesis method established a good antibacterial activity against gram-positive bacteria in all types of fabric samples.