PbZr0.35Ti0.65O3 (PZT), PbZrO3 (PZO), and PZT/PZO ferroelectric/antiferroelectric multilayer films were prepared on a Pt/Ti/SiO2/Si substrate using the sol–gel method. Microstructures and physical properties such as the polarization behaviors, leakage current, dielectric features, and energy-storage characteristics of the three films were systematically explored. All electric field-dependent phase transitions, from sharp to diffused, can be tuned by layer structure, indicated by the polarization, shift current, and dielectric properties. The leakage current behaviors suggested that the layer structure could modulate the current mechanism, including space-charge-limited bulk conduction for single layer films and Schottky emission for multilayer thin films. The electric breakdown strength of a PZT/PZO multilayer structure can be further enhanced to 1760 kV/cm, which is higher than PZT (1162 kV/cm) and PZO (1373 kV/cm) films. A recoverable energy-storage density of 21.1 J/cm3 was received in PZT/PZO multilayers due to its high electric breakdown strength. Our results demonstrate that a multilayer structure is an effective method for enhancing energy-storage capacitors.
The proton-electron coupling effect induces rich spectrums of electronic states in correlated oxides, opening tempting opportunities for exploring novel devices with multifunctions. Here, via modest Pt-aided hydrogen spillover at room temperature, amounts of protons are introduced into SmNiO 3 -based devices. In situ structural characterizations together with first-principles calculation reveal that the local Mott transition is reversibly driven by migration and redistribution of the predoped protons. The accompanying giant resistance change results in excellent memristive behaviors under ultralow electric fields. Hierarchical tree-like memory states, an instinct displayed in bio-synapses, are further realized in the devices by spatially varying the proton concentration with electric pulses, showing great promise in artificial neural networks for solving intricate problems. Our research demonstrates the direct and effective control of proton evolution using extremely low electric field, offering an alternative pathway for modifying the functionalities of correlated oxides and constructing low–power consumption intelligent devices and neural network circuits.
27 January 2023 in ACS Applied Materials & Interfaces
A layer-by-layer (LbL) assembly technique was employed to modify glassy carbon electrodes (GCEs) and screen printed electrodes (SPEs) utilizing multiwalled carbon nanotubes (MWCNTs)/polyelectrolyte binary composites and an enzyme cascade to facilitate efficient electron transfer in sucrose/O2 biofuel cell. In this study, MWCNTs immobilized invertase (INV) and glucose dehydrogenase (GDH) were alternatively assembled upon polyethyleneimine (PEI) and DNA nanocomposites to construct a bioanode. [Ni(phendion)(phen)]Cl2 complex and methylene green (MG) were investigated as redox mediators for electrocatalytic oxidation of NADH at reduced overpotentials. The LbL architecture showed advantages for sequential enzymatic reaction that favored the efficient penetration of substrate and products in a cascade system while MWCNTs facilitated the efficient electron transfer from sucrose oxidation and enhancement of the current density. With a GCE bioanode modified with a MG or Ni complex, the biofuel cell produced a higher power density (μW/cm2) with 145.8% and 130.11% enhancement comparing to a SPE bioanode, respectively. Moreover, the Ni complex modified GCEs and SPEs produced power densities (μW/cm2) 93.7% and 107.0% higher compared to MG modified bioanodes, respectively. The maximum current density of 1400 ± 46 μA/cm2 was obtained with the Ni complex on GCE at an OCP of 604 ± 17 mV with a maximum power density of 405 ± 6 μW/cm2. The LbL assembly showed great feasibility as a simple and efficient way to construct controlled MWCNT-multi-enzyme modified electrodes for biofuel cell applications.
26 February 2023 in Journal of Molecular Structure