The aim of the study was to assess the influence of the addition of an oxygenated additive (a mixture of mono-, di- and triacetylglycerol obtained from residual glycerin within the biodiesel production scheme) on the specific fuel consumption and exhaust emissions of a EURO 3 diesel bus during its daily route through the city. To do this, the urban bus was fuelled with five fuel blends of diesel (D), biodiesel (B), additive (A) and heptanol as co-surfactant (H). A portable emissions measurement system was used to measure the exhaust gases while an engine exhaust particle system with a dilution system, both installed on the urban bus, was used for nanoparticles measurement in actual operating conditions through the city of Seville. Results showed that B95A5 (95%v/v biodiesel, 5%v/v additive) and B90A10 were the blends that most increased NO_x emissions (by 24.12% and 9.85%, respectively) compared to D100. On the other hand, B47.5D47.5A2.5H2.5 was the blend that most reduced total particle number (by 31.6%) and NO_x emissions (by 12%). All in all, the oxygenated additive can be efficiently blended with biodiesel to reduce particle emissions from engines without diesel particle filter, such as those in urban buses in many European cities.

With the progressive decline of tailpipe emissions, non-exhaust sources such as brake wear are becoming an increasingly important contributor to traffic-related particulate matter in urban environments. In this context, improving real-world characterization of brake wear particles is essential for air-pollution assessment, source apportionment, and the development of cleaner and more sustainable road transport systems. Here, we investigated the emissions levels, particle size distribution and elemental composition of particles released during harsh real-world braking events by a single light-duty vehicle braking system equipped with an original manufacturer (OEM) non-asbestos organic (NAO) pad formulation. Using a direct on-vehicle sampling system combined with real-time particle sizing and high-resolution microscopy, we observed that particle emissions remained close to background levels at speeds up to 100 km/h, but rose sharply at 120 km/h, reaching 3.7 × 10⁷ #/cm³ in the 8–10 nm size range. This increase suggests that higher speeds are associated with elevated particle emissions, likely due to the higher braking temperatures reached at increased vehicle speeds. The emitted particles were mainly spherical agglomerates rich in iron, titanium, barium, zirconium, and sulphur, consistent with NAO pad formulations. Our results show that the investigated NAO pad system can deteriorate under thermal stress, potentially leading to higher levels of nanoparticle emissions compared to low-metallic or semi-metallic pads investigated under similar conditions. These findings provide real-world evidence relevant to urban air quality research, support the refinement of non-exhaust emissions inventories, and highlight the importance of thermally resilient friction-material formulations for mitigating residual particulate emissions in increasingly cleaner transport systems.