Tian Xin

Dr. Tian Xin

Chang'an University
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 August 2021 in PLOS ONE
Verified
Journal Article
Open access
PDF file
Tian XinTian Xin
Tian Xin
JXJinliang Xu
Jinliang Xu
CGChao Gao
Chao Gao
ZSZhenhua Sun
Zhenhua Sun
Truck rollover is a problem that seriously endangers the safety of human life. Under special conditions, when the driver takes a sharp turn, the truck is most prone to rollover. Speed seriously affects the driving stability of the truck in a sharp turn, but the calculation of the safe speed is not accurate enough at present. The aim of this paper is to develop a more accurate safe speed calculation method to avoid the truck rollover in a sharp turn. Firstly, the calculation formula of the rollover threshold was derived based on a theoretical model, then, the simulation tests were carried out. We selected a 4-axle truck with a total weight of 30t as the subject, simulated the dynamic process of the truck rollover in a sharp turn with TruckSim, evaluated the dynamic rollover risk levels of the truck during this process, and verified the accuracy of the simulation results by results of the theoretical model. Finally, by analyzing the steering principle of the vehicle, the safe speed threshold and the limit speed threshold of the truck in a sharp turn were calculated according to the lateral acceleration corresponding to the rollover risk levels. The results show that no matter what the loading condition of the truck is, when the rollover margin is reduced to about 0.15g, the truck just reaches the risk level of critical rollover; the result provides an accurate algorithm for speed thresholds of the truck when turning radius is less than 250 m. The research provides a calculation method for safe speed of trucks from a dynamic perspective. The research results can be applied to the speed warning system of trucks, which can make drivers better control the rollover risk of trucks in the process of driving and improve driving safety.

JXJinliang Xu
Jinliang Xu
Tian XinTian Xin
Tian Xin
GCGao Chao
Gao Chao
ZSZhenhua Sun
Zhenhua Sun
Truck rollover crashes on horizontal curves have been recognized as one of the most serious types of crashes. Driver’s instantaneous emergency steering maneuvers (DIESM) play an important role in truck rollover crashes, but have not received much attention. In the present study, the radius of curvature of the actual vehicle travel path (AVTP) under DIESM was calculated based on the transient bicycle model. Rollover margins were used to evaluate the truck-rollover potential under DIESM. To calculate rollover margins, the lateral acceleration under DIESM was calculated based on the radius of the curvature of the AVTP. A rollover threshold formula was introduced to calculate vehicle’s rollover thresholds by distinguishing two turning conditions. According to rollover margins, the maximum safe instantaneous input of the steering wheel against rollover for trucks was obtained. Moreover, theoretical results were verified by computer simulation. Results showed: (1) The maximum safe instantaneous inputs of the steering wheel were 259°, 212°, 182°, 162°and 147°, respectively, at speeds of 60 km/h, 70 km/h, 80 km, 90 km and 100 km when the superelevation rate was 0, and (2) superelevation significantly affected truck-rollover potential; the worst turning condition was turning from the inside to the outside of the curve. Due to the consideration of the wheelbase, the centroid position, the tire’s cornering stiffness and the suspension roll gain, the prediction results were more accurate.

28 April 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZSZhenhua Sun
Zhenhua Sun
JXJinliang Xu
Jinliang Xu
CGChenwei Gu
Chenwei Gu
Tian XinTian Xin
Tian Xin
WZWei Zhang
Wei Zhang
Tunnel–interchange connecting sections pose significant safety challenges on mountainous expressways due to their high incidence of accidents. Improving road safety necessitates a comprehensive understanding of driver behavior in such areas. This study explores the influences of road characteristics, signage information volume, and traffic conditions on drivers’ car-following and lane-changing behavior in tunnel–interchange diverging areas. Utilizing driving data from 25 subjects of 72 simulated road models, driving performance is assessed using the Friedman rank test and multivariate variance analysis. The results highlight the significant influence of both connection distance and signage information load on driving behavior. In tunnel–interchange scenarios, the reduction in velocity increased by 62.61%, and speed variability surged by 61.11%, indicating potential adverse effects on driving stability due to the environmental transitions. Decreased connection distances are associated with reduced lane-changing durations, larger steering angles, and increased failure rates. Furthermore, every two units of increase in signage information leads to a 13.16% rise in maximum deceleration and a 5% increase in time headway. Notably, the signage information volume shows a significant interaction with connection distance (F > 1.60, p < 0.045) for most car-following indicators. Hence, the study recommends a maximum connection distance of 700 m and signage information not exceeding nine units for optimal safety and stability.

18 April 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
ZSZhenhua Sun
Zhenhua Sun
JXJinliang Xu
Jinliang Xu
CGChenwei Gu
Chenwei Gu
Tian XinTian Xin
Tian Xin
WZWei Zhang
Wei Zhang
Tunnel-interchange connecting sections pose significant safety challenges on mountainous expressways due to their high incidence of accidents. Improving road safety necessitates a comprehensive understanding of driver behavior in such areas. This study explores the influences of road characteristics, signage information volume, and traffic conditions on drivers' car-following and lane-changing behavior in tunnel-interchange diverging areas. Utilizing driving data from 25 subjects of 72 simulated road models, driving performance is assessed using Friedman rank test and multivariate variance analysis. The results highlight the significant influence of both connection distance and signage information load on driving behavior. In tunnel-interchange scenarios, the reduction of velocity increased by 62.61%, and speed variability surged by 61.11%, indicating potential adverse effects on driving stability due to the environmental transitions. Decreased connection distances are associated with reduced lane-changing durations, larger steering angles, and increased failure rates. Furthermore, every two units increase in signage information leads to a 13.16% rise in maximum deceleration and a 5% increase in time headway. Notably, the signage information volume shows a significant interaction with connection distance (F=1.60, P=0.045) for most car-following indicators. Hence, the study recommends a maximum connection distance of 700 m and signage information not exceeding nine units for optimal safety and stability.

14 October 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Tian XinTian Xin
Tian Xin
JXJinliang Xu
Jinliang Xu
Truck skidding crashes on horizontal curves pose a significant road safety concern, with improper braking being the primary cause. A data- and model-integrated driven method is proposed to investigate the mechanism and recommend the maximum safe braking deceleration rates without skidding (abbreviated as MSBDRs) for trucks on horizontal curves. Firstly, a comprehensive road–vehicle interaction model was developed, considering dynamic changes in brake force distribution, vertical tire load, and longitudinal and side friction during braking. Secondly, leveraging the “HighD” data set and employing cluster analysis principles, parameter data were extracted using Python and Matlab. Finally, through parameterizing model inputs, the transient dynamic response of trucks was examined, the potential of truck skidding was predicted, and the MSBDRs were recommended. The results indicate the following. (1) There is little concern of truck skidding during car-following braking maneuvers; however, there is a high potential of truck skidding during emergency braking maneuvers. (2) The MSBDR is 4.5 m/s2 on a limit-minimum-radius horizontal curve; however, when combined with steep slopes, an overspeed exceeding 20%, and extremely wet road conditions, respectively, the MSBDRs decrease to 4 m/s2, 3 m/s2, and 2 m/s2. These results provide a theoretical foundation for braking strategies in autonomous vehicles.

3 March 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
JXJinliang Xu
Jinliang Xu
YMYongji Ma
Yongji Ma
GCGao Chao
Gao Chao
Tian XinTian Xin
Tian Xin
HYHoufu Yang
Houfu Yang
ZWZhiyuan Wan
Zhiyuan Wan
Road horizontal curves, which significantly influence drivers’ visual search behavior and are closely linked to traffic safety, also constitute a crucial factor in sustainable road traffic development. This paper uses simulation driving experiments to explore the dynamic response characteristics of 27 typical subject drivers’ visual search behavior regarding road horizontal curve radius. Results show that in a monotonous, open road environment, the driver’s visual search is biased towards the inside of the curve; as the radius increases, the 85th percentile value of the longitudinal visual search length gradually increases, the 85th percentile value of the horizontal search angle gradually decreases, the 85th percentile value of vehicle speed gradually increases, and the dispersion and bias of the gaze points gradually decrease. The search length, horizontal angle, and speed approach the level of straight road sections (380 m, 10° and 115 km/h, respectively). When R ≥ 1200 m, a driver’s dynamic visual search range reaches a stable distribution state that is the same as that of a straight road. A dynamic visual search range distribution model for drivers on straight and horizontal curved road sections is constructed. Based on psychological knowledge such as attention resource theory and eye–mind theory, a human factor engineering explanation was provided for drivers’ attention distribution and speed selection mechanism on road horizontal curve sections. The research results can provide theoretical references for the optimization design of road traffic, decision support to improve the driver training system, and a theoretical basis for determining the visual search characteristics of human drivers in autonomous driving technology, thereby promoting the safe and sustainable development of road traffic.