The rapid development of nanomedicine and drug delivery systems calls for new and effective characterization techniques that can accurately characterize both the properties and the behavior of nanosystems. Standard methods such as dynamic light scattering (DLS) and fluorescent-based assays present challenges in terms of system’s instability, machine sensitivity, and loss of tracking ability, among others. In this study, we explore some of the downsides of batch-mode analyses and fluorescent labeling, while introducing quantitative phase microscopy (QPM) as a label-free complimentary characterization technique. Liposomes were used as a model nanocarrier for their therapeutic relevance and structural versatility. A successful immobilization of liposomes in a non-dried setup allowed for static imaging conditions in an off-axis phase microscope. Image reconstruction was then performed with a phase-shifting algorithm providing high spatial resolution. Our results show the potential of QPM to localize subdiffraction-limited liposomes, estimate their size, and track their integrity over time. Moreover, QPM full-field-of-view images enable the estimation of a single-particle-based size distribution, providing an alternative to the batch mode approach. QPM thus overcomes some of the drawbacks of the conventional methods, serving as a relevant complimentary technique in the characterization of nanosystems.
The article elucidates the physical mechanism behind the generation of superior‐contrast and high‐resolution label‐free images using an optical waveguide. Imaging is realized by employing a high index contrast multi‐moded waveguide as a partially coherent light source. The modes provide near‐field illumination of unlabeled samples, thereby repositioning the higher spatial frequencies of the sample into the far‐field. These modes coherently scatter off the sample with different phases and are engineered to have random spatial distributions within the integration time of the camera. This mitigates the coherent speckle noise and enhances the contrast (2–10) × as opposed to other imaging techniques. Besides, the coherent scattering of the different modes gives rise to fluctuations in intensity. The technique demonstrated here is named chip‐based Evanescent Light Scattering (cELS). The concepts introduced through this work are described mathematically and the high‐contrast image generation process using a multi‐moded waveguide as the light source is explained. The article then explores the feasibility of utilizing fluctuations in the captured images along with fluorescence‐based techniques, like intensity‐fluctuation algorithms, to mitigate poor‐contrast and diffraction‐limited resolution in the coherent imaging regime. Furthermore, a straight waveguide is demonstrated to have limited angular diversity between its multiple modes and therefore, for isotropic sample illumination, a multiple‐arms waveguide geometry is used. The concepts introduced are validated experimentally via high‐contrast label‐free imaging of weakly scattering nanosized specimens such as extra‐cellular vesicles (EVs), liposomes, nanobeads and biological cells such as fixed and live HeLa cells.
Label-free optical microscopy utilizes the information encoded in light scattered off unlabeled particles to generate the images. This review article starts off with a discussion on how this light matter interaction gives rise to the issues of poor-contrast and diffraction-limited spatial resolution. Then, this article reviews the various far-field label-free optical microscopy techniques that have been developed, with an emphasis on the physical mechanisms behind the image formation processes in such techniques. Thus the article aims to elucidate the various state-of-the-art label-free techniques and their current applications.
The advantages of quantitative phase microscopy (QPM) such as label-free imaging with high spatial sensitivity, live cell compatibility and high-speed imaging makes it viable for various biological applications. The measurement accuracy of QPM strongly relies on the shape of the recorded interferograms, whether straight or curved fringes are recorded during the data acquisition. Moreover, for a single shot phase recovery high fringe density is required. The wavefront curvature for the high-density fringes over the entire field of view is difficult to be discerned with the naked eye. As a consequence, there is a quadratic phase aberration in the recovered phase images due to curvature mismatch. In the present work, we have implemented sampling moiré method for real-time sensing of the wavefront curvature mismatch between the object and the reference wavefronts and further for its correction. By zooming out the interferogram, moiré fringes are generated which helps to easily identify the curvature of the fringes. The wavefront curvature mismatch correction accuracy of the method is tested with the help of low temporal coherent light source such as a white light (temporal coherence ∼ 1.6 µm). The proposed scheme is successfully demonstrated to remove the quadratic phase aberration caused due to wavefront mismatch from an USAF resolution target and the biological tissue samples. The phase recovery accuracy of the current scheme is further compared with and found to better than the standard method called principle component analysis. The proposed method enables recording of the corrected wavefront interferogram without needing any additional optical components or modification and also does not need any post-processing correction algorithms. The proposed method of curvature compensation paves the path for a high-throughput and accurate quantitative phase imaging.
The photo-kinetics of fluorescent molecules have enabled the circumvention of the far-field optical diffraction limit. Despite its enormous potential, the necessity to label the sample may adversely influence the delicate biology under investigation. Thus, continued development efforts are needed to surpass the far-field label-free diffraction barrier. The statistical similarity or finite coherence of the scattered light off the sample in label-free mode hinders the application of existing super-resolution methods based on incoherent fluorescence imaging. In this article, we present physics and propose a methodology to circumvent this challenge by exploiting the photoluminescence (PL) of silicon nitride waveguides for near-field illumination of unlabeled samples. The technique is abbreviated EPSLON, Evanescently decaying Photoluminescence Scattering enables Label-free Optical Nanoscopy. We demonstrate that such an illumination has properties that mimic the photo-kinetics of nano-sized fluorescent molecules, i.e., such an illumination permits incoherence between the scattered fields from various locations on the sample plane. Thus, the illumination scheme enables the development of a far-field label-free incoherent imaging system that is linear in intensity and stable over time, thereby permitting the application of techniques like structured illumination microscopy (SIM) and intensity-fluctuation-based optical nanoscopy (IFON) in label-free mode to circumvent the diffraction limit. In this proof-of-concept work, we observed a two-point resolution of $$\sim$$ 180 nm on super-resolved nanobeads and resolution improvements between 1.9× to 2.8× over the diffraction limit, as quantified using Fourier Ring Correlation (FRC), on various biological samples. We believe EPSLON is a step forward within the field of incoherent far-field label-free super-resolution microscopy that holds a key to investigating biological systems in their natural state without the need for exogenous labels.
Understanding polarization in waveguides is of fundamental importance for any photonic device and is particularly relevant within the scope of fiber optics. Here, we investigate the dependence of the geometry-induced polarization behavior of single-ring antiresonant hollow-core fibers on various parameters from the experimental perspective, showing that structural deviations from an ideal polygonal shape impose birefringence and polarization-dependent loss, confirmed by a toy model. The minimal output ellipticity was found at the wavelength of lowest loss near the center of the transmission band, whereas birefringence substantially increases toward the resonances. The analysis that qualitatively also applies to other kinds of hollow-core fibers showed that maximizing the amount of linearly polarized light at the fiber output demands both operating at the wavelength of lowest loss, as well as carefully choosing the relative orientation of input polarization. This should correspond to the situation in which the difference of the core extent along the two corresponding orthogonal polarization directions is minimal. Due to their practical relevance, we expect our findings to be very important in fields such as nonlinear photonics or metrology.