The aim of the study was to evaluate the possibility of using the process of dark fermentation to convert kitchen waste into valuable volatile fatty acids in a semi-continuous process at different values of the organic loading rate (2.5 and 5.0 gVS/(L × d)) and hydraulic retention time (5 and 10 d) using anaerobic mixed microbial consortia. The experiments were performed in a bioreactor of working volume 8L with pH control. The maximum volatile fatty acids yield in a steady state (22.3 g/L) was achieved at the organic loading rate of 5.0 gVS/(L × d) and HRT of 10 days. The main products of dark fermentation were acetic and butyric acids, constituting, respectively, 35.2–47.7% and 24.1–30.0% of all identified volatile fatty acids. Additionally, at the beginning of the fermentation and in a steady-state condition, the microbial population analysis (16S rDNA) of the fermentation mixture with the most effective volatile fatty acids generation has been performed to monitor the DF microflora development. The dominant microorganisms at a phylum level in a steady state were Firmicutes (44.9%) and Bacteroidetes (30.1%), which indicate the main role of those phyla in the volatile fatty acids synthesis.

Dark fermentation (DF) of kitchen waste (KW) is a promising technology for the production of renewable biohydrogen. It can be both a method of obtaining clean energy and a sustainable waste management. Despite its potential, this process requires further research to improve efficiency. The aim of the research was to test the effect of thermal pretreatment of the inoculum on H₂ and volatile fatty acids (VFAs) production in the DF process. The process was carried out at 37 °C, in batch mode. The digested sludge from the Group Wastewater Treatment Plant in Lodz was used as inoculum. KW from households was used as substrate. The inoculum was pre-treated at 70 °C for 15 and 30 min. Two control reference experiments were also used. The first without the inoculum, and the second without heating the inoculum. The thermal pretreatment inhibited methane production and increased hydrogen production. After the thermal pretreatment, the amount of CO₂ produced during the process decreased compared to the bioreactor without inoculum pretreatment. Additionally, the main VFAs in the samples with pretreated inoculum were acetic and butyric acids, which are associated with hydrogen production in the biochemical pathways of the DF process. However, the time of thermal pretreatment had no significant effect on H₂ production.