We directly measure optical bound states in the continuum (BICs) by embedding a photodetector into a photonic crystal slab. The BICs observed in our experiment are the result of accidental phase matching between incident, reflected and in-plane waves at seemingly random wave vectors in the photonic band structure. Our measurements were confirmed through a rigorously coupled-wave analysis simulation in conjunction with temporal coupled mode theory. Polarization mixing between photonic crystal slab modes was observed and described using a plane wave expansion simulation. The ability to probe the field intensity inside the photonic crystal and thereby to directly measure BICs represents a milestone in the development of integrated opto-electronic devices based on BICs.

Predictable tuning behavior and stable laser operation are both crucial for laser spectroscopy measurements. We report a sampled grating quantum cascade laser (QCL) with high spectral tuning stability over the entire tuning range. We have determined the minimum loss margin required to suppress undesired lasing modes in order to ensure predictable tuning behavior. We have quantified power fluctuations and drift of our devices by measuring the Allan deviation. To demonstrate the feasibility of sampled grating QCLs for high-precision molecular spectroscopy, we have built a simple transmission spectroscopy setup. Our results prove that sampled grating QCLs are suitable light sources for highly sensitive spectroscopy measurements.

Short-wavelength-infrared (SWIR; 1.4–3.0 µm) photodetection is important for various applications. Inducing a low-cost silicon-compatible material, such as germanium, to detect SWIR light would be advantageous for SWIR applications compared with using conventional (III-V or II-VI) SWIR materials. Here, we present a scalable nonequilibrium method for hyperdoping germanium with gold for dopant-mediated SWIR photodetection. Using ion implantation followed by nanosecond pulsed laser melting, we obtain a single-crystal material with a peak gold concentration of 3 × ${10}^{19}{\mathrm{cm}}^{-3}$ $({10}^3$ times the solubility limit). This hyperdoped germanium has fundamentally different optoelectronic properties from those of intrinsic and conventionally doped germanium. This material exhibits sub-band-gap absorption of light up to wavelengths of at least 3 µm, with a sub-band-gap optical absorption coefficient comparable to that of commercial SWIR photodetection materials. We show that germanium hyperdoped with gold exhibits sub-band-gap SWIR photodetection at room temperature, in contrast with previous doped-germanium photodetector studies, which only show a low-temperature response. This material is a potential pathway to low-cost room-temperature silicon-compatible SWIR photodetection.

Obtaining short-wavelength-infrared (SWIR; 1.4 μm–3.0 μm) room-temperature photodetection in a low-cost, group IV semiconductor is desirable for numerous applications. We demonstrate a non-equilibrium method for hyperdoping germanium with selenium or tellurium for dopant-mediated SWIR photodetection. By ion-implanting Se or Te into Ge wafers and restoring crystallinity with pulsed laser melting induced rapid solidification, we obtain single crystalline materials with peak Se and Te concentrations of 10²⁰ cm⁻³ (10⁴ times the solubility limits). These hyperdoped materials exhibit sub-bandgap absorption of light up to wavelengths of at least 3.0 μm, with their sub-bandgap optical absorption coefficients comparable to those of commercial SWIR photodetection materials. Although previous studies of Ge-based photodetectors have reported a sub-bandgap optoelectronic response only at low temperature, we report room-temperature sub-bandgap SWIR photodetection at wavelengths as long as 3.0 μm from rudimentary hyperdoped Ge:Se and Ge:Te photodetectors.