The article presents the equations of "free calcium hydroxide" mass transfer describing the liquid corrosion of cement concretes. The boundary value problem of "free calcium hydroxide" mass conductivity in dimensionless variables is obtained. Also, in order to obtain a solution to the boundary value problem of mass conductivity, it is proposed to use a combined approach, which consists in the fact that at the beginning of each microprocess an analytical solution is obtained, and then the whole process is gradually calculated on a computer. It should be noted that the method gives good results if it is carried out in conjunction with the Laplace integral transformation method. In addition, the Laplace transform often makes it possible to obtain a solution in two forms: at Fom ˃0,1 and Fom ˂˂ 0,1, this is the advantage of using this transformation. The solution of the boundary value problem of mass conductivity is obtained, which allows to find not only the profiles of dimensionless and dimensional concentrations of "free calcium hydroxide" in concrete thickness, but also makes it possible to determine the value of this value gradient at the phases interface. The obtained solution allows further determining the time of reaching the critical concentration of "free calcium hydroxide" at the phases interface, corresponding to the beginning of high-basic components decomposition, and hence moving on to the further stages of study and corrosion processes modeling, which is confirmed by the graphical dependencies presented in the paper.
31 December 2018 in IOP Conference Series: Materials Science and Engineering
The article is devoted to the study of chloritization of cement concretes during corrosion in liquid aggressive media. With the help of mathematical models, chloride ion concentration profiles are constructed for the thickness of the concrete coating. The possibility of using mathematical models in the description of corrosion of the second type of cement concretes to determine the mass transfer indicators and calculate the corrosion rate of reinforcing steel in concrete is shown. The effect of hydrophobizing additives on the rate of chloride ion transfer through the concrete coating to the reinforcement surface is considered. A study was made of the chlorination of cement concretes taking into account the phenomenon of pore and capillary colmatation. Graphical dependences of the rate of chloride ions transport on the speed and degree of colmatation of pores and capillaries of concretes based on Portland cement during corrosion in liquid aggressive media are presented. Time intervals for the beginning of corrosion of steel reinforcement are established for the corrosion of reinforced concrete in liquid aggressive media containing chloride ions.
The entry of aggressive substances into the pore structure of concrete causes the development of corrosion processes and leads to the destruction of the cement stone structure. Hydrophobic additives provide high density and low permeability and are an effective barrier to the penetration of aggressive substances into the structure of cement stone. To assess the contribution of hydrophobization to the durability of the structure, it is necessary to know how much the processes of corrosive mass transfer slow down. To study the properties, structure and composition of the materials studied in the work (solid and liquid phases) before and after exposure to liquid-aggressive media, experimental studies were carried out using chemical and physicochemical analysis methods: determination of density, water absorption, porosity, water absorption and strength of cement stone; differential thermal analysis; quantitative analysis of calcium cations in liquid medium by complexometric titration. The article presents the results of studies of the effect on the operational characteristics of the introduction of a hydrophobic additive of calcium stearate into the cement mixture at the stage of concrete production. The effectiveness of volumetric hydrophobization was evaluated to prevent the penetration of an aggressive chloride-containing medium into the pore structure of concrete destruction and the leaching of calcium-containing components of cement stone. It was found that the introduction of calcium stearate in an amount of 0.8–1.3% by weight of cement increases the service life of a concrete product during corrosion in liquid chloride-containing media with a high degree of aggressiveness by four times.
The article presents data on the study of the kinetics of liquid corrosion of cement concrete infected with microorganisms Bacillus subtilis and Aspergillus niger. The equilibrium concentrations of calcium cations during fungal and bacterial corrosion of cement concrete in an aqueous medium are established. According to the profiles of calcium hydroxide concentrations in the thickness of cement concrete during fungal and bacterial corrosion, it was found that during fungal corrosion of concrete, the intensity of interaction of calcium hydroxide with the products of the vital activity of microorganisms is higher than during bacterial corrosion. In case of fungal corrosion under conditions of Aspergillus niger infection, citric acid has the greatest impact on concrete since its amount in the products of the vital activity of microorganisms is maximum. Profiles of concentrations of aggressive substances by the thickness of the concrete sample show that bacterial corrosion proceeds more slowly than fungal corrosion and allow us to calculate the time to reach the maximum concentration of aggressive substances at the surface of steel reinforcement in concrete. Corrosion of reinforcement in concrete with fungal corrosion will begin in 2.5 years after infection, with bacterial corrosion after 5.5 years.
Phosphate coatings are successfully applied as a method of protecting steel products and structures from corrosion. Phosphate coatings mechanically prevent the entry of aggressive particles, such as chloride ions, to the surface of steel reinforcement. The parameters of corrosion rate of reinforcing steel in aggressive environment are determined by graphical method. The analysis of corrosion diagrams allows us to judge the effect of protective phosphate coatings on the kinetics of the corrosion process of steel reinforcement in environments of varying degrees of aggressiveness. The tests of the protective properties of phosphate coatings by contact corrosion method show that films with a finer crystal structure, as in modified phosphate coatings, are more resistant to anodic dissolution of steel. In parallel to determination of iron ions content in solutions the potential of steel reinforcement samples was measured. In samples protected by phosphate films, the potential change is not as sharp as in samples without coating, and the “dilution” of steel is slower. The study of anodic behavior of steel reinforcement of reinforced concrete, experimental study of the mass transfer mechanism of electrolyte supply to the surface of reinforced steel allow to develop practical recommendations to improve corrosion resistance and ensure the durability of reinforced concrete building materials.