Whole-spacecraft launch-vibration isolation systems are attractive for achieving the goal of better, faster, cheaper, and lighter small satellites by reducing the design-load and vibration-test specifications for on-board components. In this study, a three-axis passive launch-vibration isolation system, based on superelastic shape memory alloy (SMA) technology, was developed to significantly attenuate the dynamic launch loads transmitted to a small satellite. This provides a superior damping characteristic, achieved by superelastic SMA blades stiffened by multilayered thin plates with viscous lamina adhesive layers of acrylic tape. The basic characteristics of the proposed isolation system with various numbers of viscoelastic multilayers were obtained through a static load test. In addition, the effectiveness of the design was validated through a launch environment simulating sine and random vibration tests.
A stepper-actuated mechanism, such as a gimbal type antenna, is a major source of micro-jitters that affect the image quality of a high-resolution observation satellite. Attenuating micro-jitter disturbances induced by a stepper motor activation is one method of enhancing image quality of an observation satellite. In this study, we propose a novel gear with micro-jitter attenuation capability for stepper-actuated mechanism. This can be achieved by implementing a pseudoelastic shape memory alloy mesh washer on the gear wheel. This application makes it possible to achieve the gear with lower torsional stiffness and higher damping in the torsional direction of the gear, whose characteristics will assist in resolving the micro-jitter attenuation issues of a gear. The effectiveness of the gear proposed in this study was demonstrated by numerical simulation and jitter measurement tests using the gimbal type antenna mechanism actuated by the stepper motor.
The Small SAR Technology Experimental Project (S-STEP) mission aims to develop a new (space-based 80 kg-class active X-band synthetic aperture radar (SAR)) satellite with a main imaging mode of 1 m resolution stripmap. In the S-STEP mission, to achieve the design goal of developing faster, cheaper, better, and lighter small SAR satellite systems, innovative thermo-mechanical design approaches have been proposed and investigated. The major design approaches are the bus-payload integrated flat plate-type structure, multifunctional transmit/receive (TR) module, and dedicated vibration-free orbit deployer (VFOD) with the function of whole spacecraft vibration isolation. To validate the feasibility of the innovative mechanical design of S-STEP, a structural analysis considering launch and on-orbit environments is performed. In addition, development test results are presented to confirm the effectiveness of the proposed design approach for VFOD.
1 February 2019 in Mechanical Systems and Signal Processing
In a launch environment, all satellites are subjected to severe random vibration and acoustic loads owing to rocket separation, airflow, and injection/combustion of the fuel. Structural vibrations induced by mechanical loads cause the malfunction of vibration-sensitive components in a satellite, leading to failures during the launch process or an on-orbit mission. Therefore, in this study, a shape memory alloy-based vibration isolator was used on the connection between the launch vehicle and satellite to reduce the vibration transmission to a satellite. The vibration isolator exhibited a high performance in the vibration isolation, owing to the dynamic properties of super-elasticity and high damping. The vibration-reduction performance of the vibration isolator was experimentally verified using random vibration and acoustic tests in a structural thermal model of the satellite developed in the synthetic aperture radar technology experimental project. Owing to the super-elasticity and high attenuation characteristics of the vibration isolator, it was possible to significantly reduce the random vibration of the satellite in the launch environment. Although the mechanical load of the acoustic test mainly excited the antenna on the upper side of the satellite rather than the bottom side, the results of the acoustic test showed the same trend as the random vibration test. From this perspective, the vibration isolator can contribute to saving the costs required for satellite development. These advantages have made it possible to develop satellites according to the new space paradigm, which is a trend in the space industry worldwide.