The potential for improving the penetration depth of optical coherence tomography systems by using light sources with longer wavelengths has been known since the inception of the technique in the early 1990s. Nevertheless, the development of mid-infrared optical coherence tomography has long been challenged by the maturity and fidelity of optical components in this spectral region, resulting in slow acquisition, low sensitivity, and poor axial resolution. In this work, a mid-infrared spectral-domain optical coherence tomography system operating at a central wavelength of 4 µm and an axial resolution of 8.6 µm is demonstrated. The system produces two-dimensional cross-sectional images in real time enabled by a high-brightness 0.9- to 4.7-µm mid-infrared supercontinuum source with a pulse repetition rate of 1 MHz for illumination and broadband upconversion of more than 1-µm bandwidth from 3.58–4.63 µm to 820–865 nm, where a standard 800-nm spectrometer can be used for fast detection. The images produced by the mid-infrared system are compared with those delivered by a state-of-the-art ultra-high-resolution near-infrared optical coherence tomography system operating at 1.3 μm, and the potential applications and samples suited for this technology are discussed. In doing so, the first practical mid-infrared optical coherence tomography system is demonstrated, with immediate applications in real-time non-destructive testing for the inspection of defects and thickness measurements in samples that exhibit strong scattering at shorter wavelengths.

In this paper, we report the mode area scaling of a rare-earth doped step index fiber by using low numerical aperture. Numerical simulations show the possibility of achieving an effective area of ~700um² (including bend induced effective area reduction) at a bend diameter of 32cm from a 35μm core fiber with a numerical aperture of 0.038. An effective single mode operation is ensured following the criterion of the fundamental mode loss to be lower than 0.1dB/m while ensuring the higher order modes loss to be higher than 10dB/m at a wavelength of 1060nm. Our optimized modified chemical vapor deposition process in conjunction with solution doping process allows fabrication of an Yb-doped step index fiber having an ultra-low numerical aperture of ~0.038. Experimental results confirm a Gaussian output beam from a 35μm core fiber validating our simulation results. Fiber shows an excellent laser efficiency of ~81%and aM² less than 1.1.

We propose a novel all-solid rod-type fiber structure that presents a cylindrical symmetry and low refractive-index contrasts. Effectively single-mode propagation for the fundamental mode is ensured thanks to resonant couplings between Higher Order Modes (HOMs) and cladding modes. Numerical simulations demonstrate the possibility of achieving a fundamental mode effective area as large as 5000µm² at a wavelength of 1.06μm in fibers ensuring a high leakage loss ratio (>100) between the HOMs and the fundamental mode while keeping the fundamental mode leakage losses at a level lower than 0.2dB/m. Further scaling to an effective area of 12,200µm² at 1.06μm in an effectively single-mode fiber is also presented by exploiting the power delocalization of several HOMs on top of the high-leakage loss filtering.

We report a novel “single trench fiber” design for mode area scaling of the fundamental mode while offering effective single mode operation for a compact fiber laser device. This fiber design allows very high suppression of the higher order modes by offering high loss and power delocalization. It has the advantages of low cost and easy fabrication thanks to all solid fiber design, cylindrical symmetry, and higher refractive index of core as that of the cladding. A Yb-doped single trench fiber with a 40µm core diameter has been fabricated from modified chemical vapor deposition process in conjunction with solution-doping offering an effective mode area of as large as ~1,000µm² at 1060nm for the bend radius of 20cm. Detailed characterizations confirm a robust single mode behavior of the fiber. Comparative analysis with other fiber designs shows significant performance enhancement of effective single mode operation suitable for fiber laser applications.

Short wavelength operation (1650–1800 nm) of silica-based thulium-doped fiber amplifiers (TDFAs) is investigated. We report the first demonstration of in-band diode-pumped silica-based TDFAs working in the 1700–1800 nm waveband. Up to 29 dB of small-signal gain is achieved in this spectral region, with an operation wavelength accessible by diode pumping as short as 1710 nm. Further gain extension toward shorter wavelengths is realized in a fiber laser pumped configuration. A silica-based TDFA working in the 1650–1700 nm range with up to 29 dB small-signal gain and noise figure as low as 6.5 dB is presented.

Bending performance of the Multi-trench Fibers (MTFs) has been investigated using the Finite Element Method. Numerical investigations show that MTFs can provide low-loss effective single mode operation under bent configuration, thanks to the resonant coupling of the Higher order Modes (HOMs). Large ratio between the HOMs and the Fundamental Mode (FM) losses can be ensured, although the ratio drops with increasing Effective Area (A_eff) of the FM. MTFs provide better losses ratio between the HOMs and the FM in comparison with other fibers like step-index, W-type, and parabolic fibers.