3D printing (or more formally called additive manufacturing) has the potential to revolutionize the way objects are manufactured, ranging from critical applications such as aerospace components to medical devices, making the materials stronger, lighter and more durable than those manufactured via conventional methods. While the mechanical properties of Ti-6Al-4V parts manufactured with two major 3D printing techniques: selective laser melting (SLM) and electron beam melting (EBM), have been reported, it is unknown if the corrosion resistance of the 3D-printed parts is comparable to that of the alloy made with isothermal forging (ISF). The aim of this study was to identify the corrosion resistance and mechanisms of Ti-6Al-4V alloy manufactured by SLM, EBM and ISF via electrochemical corrosion tests in 3.5% NaCl solution, focusing on the effect of microstructures. It was observed that the equiaxed α + β microstructure in the ISF-manufactured Ti-6Al-4V alloy had a superior corrosion resistance to the acicular martensitic α′ + β and lamellar α + β microstructures of the 3D-printed samples via SLM and EBM, respectively. This was mainly due to the fact that (1) a higher amount of β phase was present in the ISF-manufactured sample, and (2) the fraction of phase interfaces was lower in the equiaxed α + β microstructure than in the acicular α′ + β and lamellar α + β microstructures, leading to fewer microgalvanic cells. The lower corrosion resistance of SLM-manufactured sample was also related to the higher strain energy and lower electrochemical potential induced by the presence of martensitic twins, resulting in faster anodic dissolution and higher corrosion rate.
In this work we review our new methods to computer generate amorphous atomic topologies of several binary alloys: SiH, SiN, CN; binary systems based on group IV elements like SiC; the GeSe2 chalcogenide; aluminum-based systems: AlN and AlSi, and the CuZr amorphous alloy. We use an ab initio approach based on density functionals and computationally thermally-randomized periodically-continued cells with at least 108 atoms. The computational thermal process to generate the amorphous alloys is the undermelt-quench approach, or one of its variants, that consists in linearly heating the samples to just below their melting (or liquidus) temperatures, and then linearly cooling them afterwards. These processes are carried out from initial crystalline conditions using short and long time steps. We find that a step four-times the default time step is adequate for most of the simulations. Radial distribution functions (partial and total) are calculated and compared whenever possible with experimental results, and the agreement is very good. For some materials we report studies of the effect of the topological disorder on their electronic and vibrational densities of states and on their optical properties.
14 August 2019 in ACS Applied Materials & Interfaces