Engineering educators should motivate and support students in developing not only technical competence but also professional competence including commitment to excellence. We developed an authentic assessment to improve students’ understanding of the importance of ‘perfection’ in engineering – whereby 50% good enough will not be acceptable in industry. Subsequently we aimed to motivate them to practise performing at their best when they practice engineering. Students in a third-year mechanical and mechatronic engineering unit completed a team design project designed with authentic assessment features to replicate industry expectations and a novel marking scheme to encourage the pursuit of excellence. We report mixed responses from students. Students’ ratings of their levels of effort on this assessment indicate that many perceived a positive influence on their effort. However, students’ comments included several that were consistent with students experiencing the assessment as alienating.
3 February 2023 in European Journal of Engineering Education
Access to interactive, simulated work environments through virtual reality (VR) has potential in teaching safety in design (SiD) to engineering students with reduced risk, cost and inconvenience. However, there is limited understanding of what students learn from immersive VR interventions, or the outcomes from specific learning activities. This study investigated engineering students’ SiD learning in engineering design units at an Australian university. Informed by blended cognitivist-constructivist and situative perspectives, the units embedded static visualisation, dynamic visualisation through VR simulation, and group discussion, within an authentic hazard identification and analysis process. Observational data and student performances were analysed. Students’ hazard comprehension differed by type of hazard and by learning activity. Students demonstrated understanding of SiD processes, terminology, and relevance of these to engineering design. We conclude that VR simulation is an effective learning tool, however the combination of learning elements was important to achieve learning outcomes.
Accuracy of predicted breeding values (PBV) for low heritability traits may be increased in early generations by exploiting the information available in correlated traits. We compared the accuracy of PBV for 10 correlated traits with low to medium narrow-sense heritability ( in a genetically diverse field pea (Pisum sativum L.) population after univariate or multivariate linear mixed model (MLMM) analysis with pedigree information. In the contra-season, we crossed and selfed S1 parent plants, and in the main season we evaluated spaced plants of S0 cross progeny and S2+ (S2 or higher) self progeny of parent plants for the 10 traits. Stem strength traits included stem buckling (SB) ( = 0.05), compressed stem thickness (CST) ( = 0.12), internode length (IL) ( = 0.61) and angle of the main stem above horizontal at first flower (EAngle) ( = 0.46). Significant genetic correlations of the additive effects occurred between SB and CST (0.61), IL and EAngle (−0.90) and IL and CST (−0.36). The average accuracy of PBVs in S0 progeny increased from 0.799 to 0.841 and in S2+ progeny increased from 0.835 to 0.875 in univariate vs MLMM, respectively. An optimized mating design was constructed with optimal contribution selection based on an index of PBV for the 10 traits, and predicted genetic gain in the next cycle ranged from 1.4% (SB), 5.0% (CST), 10.5% (EAngle) and −10.5% (IL), with low achieved parental coancestry of 0.12. MLMM improved the potential genetic gain in annual cycles of early generation selection in field pea by increasing the accuracy of PBV.
Thrust bearings play a vital role in propulsion systems. They rely on a thin layer of oil being trapped between rotating surfaces to produce a low friction interface. The “quality” of this bearing affects many things from noise transmission to the ultimate catastrophic failure of the bearing itself. As a result, the direct measure of the forces and vibrations within the oil filled interface would be very desirable and would give an indication of the condition of the bearing in situ. The thickness of the oil film is, however, very small and conventional vibration sensors are too cumbersome to use in this confined space. This paper solves this problem by using a piezoelectric polymer film made from Polyvinylidine Fluoride (PVDF). These films are very thin (50 m) and flexible and easy to install in awkward spaces such as the inside of a thrust bearing. A model thrust bearing was constructed using a 3D printer and PVDF films inserted into the base of the bearing. In doing so, it was possible to directly measure the force fluctuations due to the rotating pads and investigate various properties of the thrust bearing itself.
In this paper, the hysteresis characteristics of a transformer core are determined from limited on-line measured voltages and currents under certain excitations. A method for calculating the magnetization curve and hysteresis loops of the transformer core under various excitation is developed based on limited excitation conditions, and using the deep neural network, support vector regressor and the Wlodarski model. The coercivity and the amplitude of magnetic field strength of hysteresis loops can be captured with high accuracy based on this method. Then, a finite element model of the transformer core is constructed to predict the distributed magnetic flux density and the excitation current using the calculated hysteresis loops. The currents from various excitation voltages on two different transformer structures are also measured to compared with simulated currents. The outcome indicates that the overall hysteresis loops and magnetization curve of the transformer core may be useful for modeling the magnetic field and excitation current under any voltage excitation.