In this work, the feasibility of replacing petroleum-based poly(ethylene terephthalate) (PET) with fully bio-based copolyesters derived from dimethyl 2,5-thiophenedicarboxylate (DMTD), dimethyl 2,5-dimethoxyterephthalate (DMDMT), and polysaccharide-derived 1,6-hexanediol (HDO) was investigated. A systematic study of structure-property relationship revealed that the properties of these poly(thiophene–aromatic) copolyesters (PHS(20–90)) can be tailored by varying the ratio of diester monomers in the reaction, whereby an increase in DMTD content noticeably shortened the reaction time in the transesterification step due to its higher reactivity as compared with DMDMT. The copolyesters had weight-average molar masses (Mw) between 27,500 and 38,800 g/mol, and dispersity Đ of 2.0–2.5. The different polarity and stability of heterocyclic DMTD provided an efficient mean to tailor the crystallization ability of the copolyesters, which in turn affected the thermal and mechanical performance. The glass transition temperature (T_g) could be tuned from 70–100 °C, while the tensile strength was in a range of 23–80 MPa. The obtained results confirmed that the co-monomers were successfully inserted into the copolyester chains. As compared with commercial poly(ethylene terephthalate), the copolyesters displayed not only enhanced susceptibility to hydrolysis, but also appreciable biodegradability by lipases, with weight losses of up to 16% by weight after 28 weeks of incubation.

The Volume 8, published for JFFHMT Journal.

Drilling engineers continue to grapple with the persistent challenge of maintaining wellbore stability. Throughout the drilling process, the wellbore pressure experiences fluctuations induced by various factors such as swab and surge pressure, leading to potential instability. This study employs a numerical approach, utilizing Abaqus software, to investigate the impact of swab and surge pressure on the natural fracture growth within the wellbore and the evolving pore pressure. A computational tool developed with MATLAB is then utilized to ascertain a safe operational mud window by assessing the time-dependent collapse and fracture pressures. The findings illustrated a notable increase in fracture width as a function of time in response to swab and surge pressure, with the most significant percentage increase reaching 69.92%. Notably, a 69.16% augmentation in fracture width is observed in the immediate vicinity of the wellbore following the application of swab and surge pressure. However, parameters such as fracture length, loss circulation rate, and pore fluid pressure exhibited marginal changes post-integration of swab and surge effects. The examination of the time-dependent wellbore stability after integration of swab and surge pressure indicated a narrowing of the initial mud window as a function of time, with a 14.33% increase in collapse pressure and a 13.80% decrease in fracture pressure. The numerical model verification against analytical solutions demonstrated good agreement, highlighting its potential utility in optimizing particle size for wellbore reinforcement and mitigating lost circulation through natural fracture sealing.