Technological advances in unmanned aerial vehicles (UAVs) have made it possible to employ drone deliveries for packaged products, but currently no standards of practice are available to qualify packaged products traveling through this distribution channel. This research proposes a methodology to collect field data from a UAV to develop simulation techniques for use with package testing equipment. This project utilized data recorders to measure the vibration, shock, and atmospheric field data on two models of the DJI drones. The root mean square G value (Grms), the power spectral density (PSD), maximum G-values and shock response spectrum, and atmospheric data were reported in this study. The study found that the general shape of the PSD profile of the drones differed from the PSD air profiles of the aircraft. The overall recorded Grms levels of the drones were also significantly higher than those of the published air profile of the aircraft. Moreover, the study found that the drone’s in-flight vibration intensities in the horizontal level were consistently higher than those in the vertical direction. The major sources of vibration and shock in both drones’ models originated from the two-propeller rotations. Shocks recorded during the flight reached 14 G, took place in the horizontal plane with the drone accelerating as opposed to the vertical plane where the drone is landing.
Postharvest damage, leading to loss and waste, continues to be a significant problem in the fresh produce industry. Trays, designed to reduce fruit-to-fruit contact, are utilized by the apple industry to minimize bruising of whole apples. During distribution, packaged apples are subjected to various supply chain hazards, which may lead to bruising damage. Currently, molded fiber (MF) and expanded polystyrene (EPS) trays transport whole apples from the packhouse to the retail outlet. Mechanical shock, by free-fall drop method, was used to evaluate the performance differences between the two trays and quantify the bruising characteristics of the apples. Results showed that the EPS trays provided better shock protection to the apple as compared to the MF tray, reducing the impact acceleration by more than 70%. Additionally, the bruise susceptibility was 40% less for the apples packaged inside the EPS trays, regardless of drop height. However, apples packaged in the middle layer trays were most susceptible to bruising damage, regardless of tray type.
4 January 2021 in Packaging Technology and Science
This study investigates longitudinal acceleration events during freight transportation characterized as low‐acceleration and long‐duration using delivery van type vehicles. In the past several decades, there has been an increase in shipments requiring only single or small pallet load quantities and mixed palletized unit loads comprised of different goods. These loads are often transported in delivery vans without load securing devices, increasing the risk of product loss and damage due to load failures resulting from unit loads shifting. A field data acquisition system was used to observe and record the random acceleration events from five vehicles for 5 days, explicitly targeting the vehicles' braking and acceleration manoeuvres. The study aimed to understand the physical phenomenon and provide new information that can be used during preshipment tests to prevent damage to goods and ensure unit load integrity is maintained throughout the supply chain. The events were statistically analysed to understand their probability of occurrence, severity level, and quantify critical parameters such as event rise and hold times. For the braking manoeuvre, the statistical mean of average deceleration was 0.25 g with a corresponding rise and hold duration of 0.83 and 1.27 s, respectively. During the vehicle's acceleration manoeuvre, the statistical mean of average acceleration was 0.29 g with a rise and hold time of 1.29 and 1.39 s, respectively. Utilizing the field data, composite profiles were developed, and these profiles were compared to the currently available test procedures and previous results of other studies.