Fouling has been widely recognized as the Achilles’ heel of membrane processes and the growing perception about the relevance of this critical issue has driven the development of advanced antifouling strategies. Herein, novel fouling-resistant ultrafiltration (UF) membranes for Cadmium (Cd) remediation were developed via a blending method by combining the flexibility of cellulose acetate (CA) with the complex properties of poly(acrylic acid) (PAA). A systematic characterization, based on differential scanning calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FTIR), confirmed the homogeneity of the blend favored by hydrogen interconnections between CA and PAA polymeric chains. The concentration of PAA with respect to CA played a key role in tuning the morphology and the hydrophilic character of the novel UF membranes prepared via non-solvent-induced phase separation (NIPS). UF experiments revealed the tremendous advantages of the blend since CA/PAA membranes showed superior performance with respect to the neat CA membrane in terms of (i) water permeability; (ii) Cd rejection; and (iii) antifouling resistance to humic acid (HA). Concisely, the increasing of the concentration of PAA in the casting solution was found to be beneficial to improve the flux recovery ratio (FRR) coupled with the decline of the total fouling ratio (Rt). Overall, PAA is an effective additive to prepare CA membranes with enhanced antifouling properties exploitable for the remediation of water bodies contaminated by heavy metals via UF process.
In this study, we reported the synthesis of hydroxyapatite modified with biopolymers as λ-carrageenan and sodium alginate, which could be used as effective adsorbents of cationic dyes. Evidence of chemical modification was proved through chemical analysis, Fourier Trans-form Infrared spectroscopy, powder X-ray diffraction, scanning electron microscopy, and specific surface area. The adsorption process was studied using methylene blue as representative cationic dye. The adsorbed quantity reached, at equilibrium, 142.85 mg/g and 98.23 mg/g using hydroxyapatite-sodium alginate and hydroxyapatite-(λ-carrageenan), respectively. However, it does not exceed 58.8 mg/g in the case of the unmodified hydroxyapatite. The adsorption of methylene blue using hybrid materials complied well with the pseudo-second-order suggesting a chemi-sorption. Freundlich and Langmuir isotherm described well the adsorption mechanism of the hydroxyapatite-(λ-carrageenan) and hydroxyapatite-sodium alginate, respectively. The high capacities of MB removal obtained in this study suggest the potential use of these materials in the treatment from wastewaters.