The effect of multicolor pulsed light-emitting diode (LED) irradiation on lettuce “Defender” growth, photosynthetic performance and antioxidant properties was studied. The experiments were designed to compare the continuous and pulsed lighting (0.5, 1 kHz; 50% duty ratio) effects of B450, G520, R660 and FR735 lighting components, maintaining total diurnal integral light quantity (DLI 14.4 mol m−2 day−1) constant during the 16-h photoperiod. The results showed that lettuce grown under pulsed irradiation displayed superior growth performance, including a significant enhancement of fresh (~32%) and dry biomass (~36%) and leaf area (~48%). Lettuce cultivated in both pulsed light treatments was characterized by the higher photosynthetic rate, chlorophyll (a,b) and carotenoid concentration. However, the total phenol and antioxidant properties in lettuce were more dependent on the specific pulsed light frequency. Only treatment with 1 kHz frequency was effective for higher phenol content, 2,20-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) free radical scavenging activity and Fe2+ reducing antioxidant power (FRAP). Thus, our results propose the role of pulsed LED light in improving the photosynthetic efficiency and antioxidative properties of lettuce plants cultivated indoors. In the future, pulsed lighting techniques should be included in the development of artificial lighting systems in controlled environment agriculture (CEA) to produce high-quality crops with the possibility to save electricity.
A new white light emitting diode, the photon recycling semiconductor light emitting diode (PRS-LED) is demonstrated. The device consists of a GaInN/GaN LED emitting in the blue spectral range and an AlGaInP photon recycling semiconductor emitting at the complementary color. Thus the PRS-LED has two emission peaks, one in the blue and one in the amber wavelength range. The theoretical luminous performance of the PRS-LED exceeds 300 lm/W, higher than the performance of phosphor-based white LEDs.
Substitutional zinc incorporates linearly into device quality InP at low Zn source flow rate grown by atmospheric pressure metalorganic vapor phase epitaxy (AP‐MOVPE) at 625 °C, and saturates around 4×1018 cm−3 at high Zn source flow rate. Increase in the Zn source flow rate beyond saturation significantly enhances interstitial incorporation. The excess interstitial diffuses into the undoped region via an interstitial‐substitutional diffusion mechanism and reveals itself as an enhanced diffusion. Previously we have proposed a surface adsorption‐desorption‐trapping model for substitutional Zn incorporation during AP‐MOVPE, where the saturation level is determined by the surface incorporation sites for substitutional Zn. This model is applied to interstitial Zn incorporation at Zn source flow rate above the saturation level for substitutional Zn to explain the enhanced Zn diffusion. The analysis is further extended to the incorporation of neutral Zn in the presence of excess phosphorus vacancies, therefore, this model can be used for simultaneous incorporation of Zn of all three types during epitaxy as long as the incorporation processes are independent.
Importance: Particulate respirators such as N95 masks are an essential component of personal protective equipment (PPE) for front-line workers. This study describes a rapid and effective UVC irradiation system that would facilitate the safe re-use of N95 respirators and provides supporting information for deploying UVC for decontamination of SARS-CoV-2 during the COVID19 pandemic. Objective: To assess the inactivation potential of the proposed UVC germicidal device as a function of time by using 3M® 8211 - N95 particulate respirators inoculated with SARS-CoV-2. Design: A germicidal UVC device to deliver tailored UVC dose was developed and snippets (2.5cm 2 ) of the 3M-N95 respirator were inoculated with 10 6 plaque-forming units (PFU) of SARS-CoV-2 and were UV irradiated. Different exposure times were tested (0-164 seconds) by fixing the distance between the lamp (10 cm) and the mask while providing an exposure of at least 5.43 mWcm -2 . Setting: The current work is broadly applicable for healthcare-settings, particularly during a pandemic such as COVID-19. Participants: Not applicable. Main Outcome(s) and Measure(s): Primary measure of outcome was titration of infectious virus recovered from virus-inoculated respirator pieces after UVC exposure. Other measures included the method validation of the irradiation protocol, using lentiviruses (biosafety level-2 agent) and establishment of the germicidal UVC exposure protocol. Results: An average of 4.38×10 3 PFUml -1 (SD 772.68) was recovered from untreated masks while 4.44×10 2 PFUml -1 (SD 203.67), 4.00×10 2 PFUml -1 (SD 115.47), 1.56×10 2 PFUml -1 (SD 76.98) and 4.44×10 1 PFUml -1 (SD 76.98) was recovered in exposures 2s,6s,18s and 54 seconds per side respectively. The germicidal device output and positioning was monitored and a minimum output of 5.43 mWcm -2 was maintained. Infectious SARS-CoV-2 was not detected by plaque assays (minimal level of detection is 67 PFUml -1 ) on N95 respirator snippets when irradiated for 120s per side or longer suggesting 3.5 log reduction in 240 seconds of irradiation. Conclusions and Relevance: A scalable germicidal UVC device to deliver tailored UVC dose for rapid decontamination of SARS-CoV-2 was developed. UVC germicidal irradiation of N95 snippets inoculated with SARS-CoV-2 for 120s per side resulted in 100% (3.5 log in total) reduction of virus. These data support the reuse of N95 particle-filtrate apparatus upon irradiation with UVC and supports use of UVC-based decontamination of SARS-CoV-2 virus during the COVID19 pandemic.