The search for alternative material sources to conventional ones has had a significant impact on the construction sector today, driven by the implementation of sustainable development policies on a global scale. Alternative cementitious materials, such as agricultural industry by-products, have been introduced to ensure the efficient use of renewable natural resources while promoting a balance between the technical and economic aspects of infrastructure projects. This article provides an overview of research conducted on the use of pozzolans derived from agro-industrial by-products, such as rice husk ash (RHA), palm oil fuel ash (POFA), and sugarcane bagasse ash (SCBA), which have a high content of amorphous silica. This silica reacts with calcium hydroxide during the hydration process of Portland cement, leading to the production of calcium silicate hydrate (C-S-H) gel with cementitious properties. Investigations have explored the improvements these pozzolans provide in terms of compressive, flexural, and tensile strength in concretes where conventional Portland cement has been partially replaced by these materials. The influence of temperature and grinding processes used in their preparation was also determined, with optimal temperatures for obtaining amorphous silica ranging between 600 °C and 700 °C. Additionally, the optimal replacement levels for enhancing the mechanical properties of concrete were found to range between 10 % and 20 %.
In recent decades, the global use of ashes derived from agro-industrial by-products, such as oil palm kernel shells, which are widely cultivated in Colombia and other tropical regions of the world, has increased. However, the application of these ashes in engineering remains limited due to their heterogeneity and variability. This study utilized scanning electron microscopy (SEM) to assess the influence of calcination temperatures, ranging from 500 °C to 1000 °C, as well as the physical processes of cutting, grinding, and crushing, on the silica content of the studied ashes. Specifically, the sample labeled M18A-c-m-T600°C-t1.5h-tr1h, which was subjected to a calcination temperature of 600 °C and underwent cutting and grinding before calcination, followed by post-calcination crushing, exhibited the highest silica concentration. Complementary techniques such as X-ray fluorescence (XRF) and X-ray diffraction (XRD), were applied to this sample to evaluate its feasibility as an additive or partial replacement for cement in concrete. XRF analysis revealed a composition of 71.24% SiO2, 9.39% Al2O3, and 2.65% Fe2O3, thus, meeting the minimum oxide content established by ASTM C 618 for the classification as a pozzolanic material. Furthermore, XRD analysis confirmed that the sample M18A-c-m-T600°C-t1.5h-tr1h is in an amorphous state, which is the only state in which silica can chemically react with calcium hydroxide resulting from the hydration reactions of cement, forming stable cementitious products with strong mechanical properties.
Oil palm kernel shell ash (POFA), a byproduct of the highly cultivated agro-industrial sector in Colombia, has been widely used for its pozzolanic properties, which enhance the mechanical and durability characteristics of concrete. Six POFA samples were analyzed after undergoing drying, cutting, grinding, crushing, and calcination at temperatures ranging from 500 °C to 1000 °C. SEM-EDS/EDX analysis, X-ray fluorescence (XRF), and loss on ignition (LOI) tests were conducted to characterize its pozzolanic potential. The results revealed that the SiO2 content increased with the calcination temperature, reaching a peak of 76.8% at 1000 °C. However, calcination at 600 °C was identified as the optimal temperature, as it balances impurity removal without inducing the formation of crystalline silica, which would negatively affect the material’s reactivity. Considering the optimal calcination temperature and the high initial LOI values, which exceeded 70% in the first calcination stage, a second calcination was performed on the 500 °C sample by increasing the temperature to 600 °C. This resulted in an LOI of 3.33%, according to ASTM C311 standards for natural pozzolans used in Portland cement concretes.
In response to the need for sustainable soil stabilization alternatives, this study explores the use of waste materials and biopolymers to improve the mechanical behavior of clay from Cartagena, Colombia. Crushed limestone waste (CLW), ground glass powder (GG), recycled gypsum (GY), xanthan gum (XG), and the combination of XG with polypropylene fibers (XG–PPF) were used as stabilizing agents. Samples were compacted at different dry densities and cured for 28 days. Unconfined compressive strength (UCS) and ultrasonic pulse velocity (UPV) tests were conducted to assess the strength and stiffness of the treated mixtures. Results were normalized using the porosity/binder index (), leading to predictive equations with high determination coefficients (R2 = 0.94 for UCS and R2 = 0.96 for stiffness). However, XG-treated mixtures exhibited distinct behavior that prevented their inclusion in a unified predictive model, as the fitted exponent x in the porosity/binder index () differed markedly from the others. While an exponent of 0.28 was suitable for blends with mineral binders, the optimal x values for XG and XG–PPF mixtures were significantly lower at 0.02 and 0.03, respectively, reflecting their unique gel-like and fiber-reinforced characteristics. The analysis of variance (ANOVA) identified cement content and compaction density as the most influential factors, while some interactions involving the residues were not statistically significant, despite aligning with experimental trends. The findings support the technical viability of using sustainable additives to enhance soil properties with reduced environmental impact.
Oil palm kernel shell ash (POFA), a byproduct of the highly cultivated agro-industrial sector in Colombia, has been widely used for its pozzolanic properties, which enhance the mechanical and durability characteristics of concrete. Six POFA samples were analyzed after undergoing drying, cutting, grinding, crushing, and calcination at temperatures ranging from 500°C to 1000°C. SEM-EDS/EDX analysis, X-ray fluorescence (XRF), and Loss on Ignition (LOI) tests were conducted to characterize its pozzolanic potential. The results revealed that the SiO₂ content increased with the calcination temperature, reaching a peak of 76.8% at 1000°C. However, calcination at 600°C was identified as the optimal temperature, as it balances impurity removal without inducing the formation of crystalline silica, which would negatively affect the material's reactivity. Considering the optimal calcination temperature and the high initial LOI values, which exceeded 70% in the first calcination stage, a second calcination was performed on the 500°C sample by increasing the temperature to 600°C. This resulted in an LOI of 3.33%, according to ASTM C311 standards for natural pozzolans used in Portland cement concretes.
31 December 2021 in Ciencia e Ingeniería Neogranadina
The use of concrete with polypropylene macrofibers can reduce the fragility and shrinkage of silica fume mixtures. Here, we investigated the effect silica fumes and aggregates have on enhancing high-performance concrete with polypropylene macrofibers. Three dosages of polypropylene macrofibers were evaluated (0.39, 0.63, and 0.79 % volume fraction), including silica fume (0.0 and 7.0 % water-cement), for two types of coarse aggregate (limestone and river gravel), with two maximum nominal sizes of coarse aggregate. In total, 96 concrete specimens were subjected to compression and bending tests to evaluate the effect of adding fiber, silica fume, and different aggregate types. The results showed a resistance to compression between 36 and 71 MPa, and that to flexural strengths of 3.6 to 5.8 MPa, which indicates high-performance concrete. The work shows that it is possible to achieve high-strength concrete with 55 mm polypropylene macrofibers combined with silica fumes and natural aggregates of both the limestone and calcareous types, which is beneficial for the local production of high-performance concrete.