jing meng

jing meng


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2020 in Applied Surface Science
Verified
Journal Article
Closed access
BGBowen Gao
Bowen Gao
JMjing meng
jing meng


1 January 2023 in Acta Physica Sinica
Verified
Journal Article
Closed access
PDF file
JMjing meng
jing meng
BGBowen Gao
Bowen Gao
通过工艺创新和薄膜优化技术成功制备基于CH3NH3PbI3/PM6:Y6(BTP-4F)的钙钛矿/有机集成太阳能电池(IPOSCs)。通过添加剂1-8二碘辛烷DIO的调控和热退火处理,极大地优化CH3NH3PbI3/PM6:Y6混合薄膜质量和获得层间欧姆接触。与此同时,近红外区有机层的空穴和电子迁移率为 8.3x10-3 cm2 /(V·S)和8.8x10-3 cm2 /(V·S),可以和可见区钙钛矿层的空穴和电子迁移率相匹配,实现在微观通路上达到载流子运输平衡,导致器件具有高短路电流密度Jsc和高填充因子FF。另外,通过优化聚合物非富勒烯体系PM6:Y6重量比例混合成膜,使得薄膜中的非辐射复合位点密度和载流子复合明显减少,使得电子和空穴的提取和传输更加高效,能够提供更大的驱动力来改善载流子传输,同时形成更宽的耗尽区来抑制载流子复合以提高器件的 开路电压Voc。优化的集成太阳能电池的短路电流密度提升到25.88A/cm2,开路电压Voc增加到1.18 V,填充因子FF达到80%, 光响应扩宽到950 nm,外量子效率在可见光区达到90%,最佳能量转换效率高达24.42%,这是目前报导的钙钛矿/有机集成太阳电池中的最高效率之一。研究结果表明,通过可见区材料和近红外区聚合物非富勒烯体系材料组合和器件结构优化来增强钙钛矿太阳电池对于近红外光的吸收,从而提升钙钛矿/有机集成太阳电池性能是一种有效的手段和方法。为将来开发高效率钙钛矿/有机集成太阳能电池奠定了实验工艺和构建理论基础。

1 April 2018 in Journal of Nanoelectronics and Optoelectronics
Verified
Journal Article
Closed access
BGBowen Gao
Bowen Gao
XMXiaojun Meng
Xiaojun Meng
JHJing Hu
Jing Hu
XHXinping Hou
Xinping Hou
HSHaiting Su
Haiting Su
JMjing meng
jing meng
A new copolymer (PC20BDTDPP) based on modified benzo[1,2-b:3,4-b']dithiophene (BDT) unit as donor and diketopyrrolopyrrole (DPP) unit as acceptor was synthesized. The bulkier alkoxy on BDT and alkyl on DPP were used to increase the solubility of the resulting polymers. It was striking that Power conversion efficiency (PCE) of polymer solar cells fabricated with PC20BDTDPP as the electron donor blended with [6,6]-phenyl-C71- butyric acid methyl ester (PC71BM) as the electron acceptor was improved from 0.72% to 1.6% by adding 3% of 1,8-diiodooctane as the solvent additive into o-dichlorobenzene. The enhanced PCE was attributed to optimized surface morphology and packed polymer chains leading to better phase separation morphology by the solvent additive. Furthermore, owing to its very narrow band gap, the synthesized polymer demonstrates a great potential for tandem or parallel-like solar cells.

27 February 2023
Verified
Conference Paper
Open access
XLXiaojun Lei
Xiaojun Lei
TGTongxiang Gu
Tongxiang Gu
SGStef Graillat
Stef Graillat
XXXiaowen Xu
Xiaowen Xu
JMjing meng
jing meng
Krylov subspace algorithms are important methods for solving linear systems. In order to efficiently solve large-scale linear systems, parallelism techniques are often applied. However, parallelism often enlarge the non-associativity of floating-point operations, which can lead to non-reproducibility of the computations. This paper compares the performance of the parallel preconditioned BiCGSTAB algorithm implemented with two different libraries (ExBLAS and ReproBLAS) that can ensure the reproducibility of computations. To address the effect of the compiler, we explicitly utilize the FMA instructions. Finally, numerical experiments show that based on two BLAS implementations, the BiCGSTAB algorithms are reproducible. By contrast, the BiCGSTAB algorithm based on ExBLAS is more accurate but more time-consuming than the one based on ReproBLAS.

1 January 2023 in Acta Physica Sinica
Verified
Journal Article
Closed access
PDF file
JMjing meng
jing meng
BGBowen Gao
Bowen Gao
钙钛矿/有机集成太阳电池具有宽带隙的钙钛矿活性层吸收高能量的光子, 较低能量的光子可以透过钙钛矿层并被窄带隙的有机活性层吸收. 即通过引入可见光区的钙钛矿材料和近红外(near-infrared, NIR)有机半导体材料组成的体异质结(bulk heterojunction, BHJ), 在保持钙钛矿型器件高开路电压的同时, 也可以获得有机电池增强的短路电流密度. 将窄带隙有机活性层PC20BDTDPP:PC71BM直接沉积在CH3NH3PbI3上制备成钙钛矿/有机集成太阳电池. CH3NH3PbI3/PC20BDTDPP:PC71BM集成太阳电池可以扩宽钙钛矿的吸收光谱, 提高近红外光的吸收利用. 结果表明, 集成太阳电池的短路电流密度提升到23.90 mA/cm2, 光响应扩宽到920 nm, 外量子效率在可见光区达到85%, 在近红外区域(800—900 nm)亦接近55%, 器件能量转换效率高达20.30%, 最佳器件的积分电流密度和近红外区的外量子效率以及能源转换效率均是目前报导的钙钛矿/有机集成太阳电池中的最高值. 在室温25 oC和湿度30%的环境下, 器件的效率经过350 h以后, 下降到初始效率的95%, 表现出极佳的器件稳定性. 研究结果表明: 通过材料组合和器件结构优化来提高钙钛矿太阳电池对于近红外光的吸收, 以及提升钙钛矿/有机集成太阳电池性能的策略是一种有效的方法. 为将来开发高效率和高稳定性的钙钛矿/有机集成电池提供了理论指导和实验基础.