An efficient way to generate nanoscale laser-induced periodic surface structures (LIPSS) in rutile-type TiO(2) with frequency-converted femtosecond laser pulses at wavelengths around 400 nm is reported. Extended-area structuring on fixed and moving substrates was obtained by exploiting the line focus of a cylindrical lens. Under defined conditions with respect to pulse number, pulse energy and scanning velocity, two types of ripple-like LIPSS with high and low spatial frequencies (HSFL, LSFL) with periods in the range of 90 nm and 340 nm, respectively, were formed. In particular, lower numbers of high energetic pulses favour the generation of LSFL whereas higher numbers of lower energetic pulses enable the preferential creation of HSFL. Theoretical calculations on the basis of the Drude model support the assumption that refractive index changes by photo-excited carriers are a major mechanism responsible for LSFL. Furthermore, the appearance of random substructures as small as 30 nm superimposing low spatial frequency ripples is demonstrated and their possible origin is discussed.
We report a detailed single-crystal and powder neutron diffraction study of and between the temperature 1.6 and 80 K to probe the spin structure in the ground state. For both compounds the strongest magnetic intensity was observed for the (111) reflection due to ferrimagnetic ordering, which sets in below and 41 K for and , respectively. An additional low intensity magnetic reflection (200) was noticed in due to the presence of an additional weak antiferromagnetic component. Interestingly, from both the powder and single-crystal neutron data of , we noticed a significant broadening of the magnetic (111) reflection, which possibly results from the disordered character of the Ti and Co atoms on the site. Practically, the same peak broadening was found for the neutron powder data of . On the other hand, from our single-crystal neutron diffraction data of , we found a spontaneous increase of particular nuclear Bragg reflections below the magnetic ordering temperature. Our data analysis showed that this unusual effect can be ascribed to the presence of anisotropic extinction, which is associated to a change of the mosaicity of the crystal. In this case, it can be expected that competing Jahn-Teller effects acting along different crystallographic axes can induce anisotropic local strain. In fact, for both ions and , the levels split into a lower level yielding a higher twofold degenerate level. As a consequence, one can expect a tetragonal distortion in with , which we could not significantly detect in the present work.
We report the low-temperature anomalous magnetic behavior of ferrimagnetic spinels cobalt orthotitanate (Co2TiO4), which exhibits magnetic compensation behavior across 31.74 K, and cobalt orthostannate (Co2SnO4) exhibiting two sequential magnetic transitions, namely (i) ferrimagnetic to paramagnetic transition with Néel temperature TN ∼ 41 K and reentrant spin-glass behavior with glass transition temperature TSG ∼ 39 K. The Arrott plot (H/M versus M2) criterion has been used to extricate the order of sequential magnetic transitions occurring below TN. Negative slopes of the Arrott plots below 32 K, metamagnetic-like character of the M-H isotherms, anomalies in the specific-heat (CP T−1 versus T) below 15 K, and a zero-crossover of isothermal magnetic-entropy-change (ΔS) signify the presence of pseudo first-order discontinuous magnetic phase transition in the low-temperature regime 5 K ≤ T ≤ 32 K. The dc- and ac-susceptibilities of both Co2TiO4 and Co2SnO4 are interpreted in terms of frozen-spin-clusters, which are responsible for very large magnitudes of the coercivity HC ∼ 20 kOe and bipolar-exchange bias HEB ∼ −20 kOe observed below 10 K.
20 December 2012 in Journal of Vacuum Science & Technology A
Al-doped ZnO films were deposited by the atomic layer deposition (ALD) on both glass and sapphire (0001) substrates. The Al composition of the films was varied by controlling the Zn:Al pulse cycle ratios. The films were characterized by the atomic force microscopy, x-ray photoelectron spectroscopy, x-ray diffraction, and optical measurements. The Film resistivity was measured as a function of Zn:Al cycle ratios as well as temperature for films grown at various substrate temperature used for ALD deposition. The resistivity of the ALD grown films decreases significantly, and so as the increase in the carrier concentration as the cycle ratio increases. The systematic measurements of temperature dependence of resistivity of films at various cycle ratios clearly demonstrate the crossover of the metal–semiconductor–insulator phase with the function of temperature as well as the cycle ratios. The average transmission of all films is greater than 85% and the optical absorption increases significantly in the visible region as the cycle ratio increases. The authors observed a remarkable dependence of photoresistance on electrical conductivity for ALD-grown films with varying cycle ratios, which control the Al content in the film. Our results suggest that Al3+ ions are incorporated as substitutional or interstitial sites of the ZnO matrix. However, an addition of an excessive amount of Al content causes the formation of Al2O3 and related clusters as carrier traps opposed to electron donors, resulting in an increase in the resistivity and other associated phenomena.