The influence of geometric arrangement of platelets (microfabric) on the mechanical behavior of kaolin clay is investigated using lubricated end triaxial testing on solid cylindrical specimens. A series of compression and extension tests under drained and undrained conditions were performed on clay specimens with different microfabric for overconsolidated ratio values of 1 and 10. The solid cylindrical specimens with dispersed and flocculated microfabric were produced in the laboratory using slurry consolidation technique under K0 condition. Based on the experimental observations, it is evident that microfabric strongly affects the mechanical behavior of kaolin clay, such as its stress–strain relationship, effective stress ratio, shear strength, excess pore-pressure evolution, and volumetric response. The influence of confining pressure on clay specimens with dispersed and flocculated microfabric is also studied in this research. This study shows that the microfabric can change the basic nature of clay. F...

A combined axial–torsional testing system was developed to investigate the effect of rotation of principal stresses on the three-dimensional mechanical behavior of Kaolin clay. Uniform and reproducible cohesive specimens having a specimen shape of a hollow cylinder were obtained using a two-stage slurry consolidation technique. Precise stress paths (triaxial compression to pure torsional shear to triaxial extension), corresponding to a fixed rotation of the major principal stress axis, were achieved by using the proportional-integral-derivative (PID) feedback control technique. Kaolin clay specimens were tested under a variety of stress paths associated with a constant principal stress rotation angle (β) under undrained conditions. Typical test results, such as effective friction angle, undrained shear strength, stress–strain relationship, pore pressure evolution, and stress paths are presented as a function of β . During shearing, the procedure to use advanced servo-hydraulic control (using PID algorithm...

The use of neutron imaging is demonstrated for visualizing and quantifying water distribution in partially saturated granular porous media. Because of the unique difference in the total neutron cross sections of water, sand, and air, a significant contrast for the three phases is observed in a neutron transmission image, and a quantitative analysis provides detailed information on the arrangement and distribution of particles, voids, and water. The experiments in this study are performed at the Neutron Imaging Facility (NIF) at the National Institute of Standard and Technology (NIST). An amorphous silicon flat panel detector was used in this research with a spatial resolution of approximately 250 μm (127 μm/pixel). The effect of particle morphology on water distribution in compacted granular columns is investigated by using round and angular silica sand. Silica sand specimens with different bulk gravimetric water contents (0%, 6%, 9%, and 12%) are studied for evaluating the water phase-distribution spati...

Carbon fiber-reinforced concrete as a structural material is attractive for civil infrastructure because of its light weight, high strength, and resistance to corrosion. Ultra-high performance concrete, possessing excellent mechanical properties, utilizes randomly oriented one-inch long steel fibers that are 200 microns in diameter, increasing the concrete’s strength and durability, where steel fibers carry the tensile stress within the concrete similar to traditional rebar reinforcement and provide ductility. Virgin carbon fiber remains a market entry barrier for the high-volume production of fiber-reinforced concrete mix designs. In this research, the use of recycled carbon fiber to produce ultra-high-performance concrete is demonstrated for the first time. Recycled carbon fibers are a promising solution to mitigate costs and increase sustainability while retaining attractive mechanical properties as a reinforcement for concrete. A comprehensive study of process structure–properties relationships is conducted in this study for the use of recycled carbon fibers in ultra-high performance concrete. Factors such as pore formation and poor fiber distribution that can significantly affect its mechanical properties are evaluated. A mix design consisting of recycled carbon fiber and ultra-high-performance concrete was evaluated for mechanical properties and compared to an aerospace-grade and low-cost commercial carbon fiber with the same mix design. Additionally, the microstructure of concrete samples is evaluated non-destructively using high-resolution micro X-ray computed tomography to obtain 3D quantitative spatial pore size distribution information and fiber clumping. This study examines the compression, tension, and flexural properties of recycled carbon fibers reinforced concrete considering the microstructure of the concrete resulting from fiber dispersion.