姚华 徐

姚华 徐

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 November 2023 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
NBNa Bai
Na Bai
XXXin Xiao
Xin Xiao
姚徐姚华 徐
姚华 徐
YWYi Wang
Yi Wang
LWLiang Wang
Liang Wang
XZXinjie Zhou
Xinjie Zhou
As technology scales down, the critical charge (QC) of vulnerable nodes decreases, making SRAM cells more susceptible to soft errors in the aerospace industry. This article proposes a Soft-Error-Aware 16T (S8P8N) SRAM cell for aerospace applications to address this issue. The properties of S8P8N are evaluated and compared with 6T, DICE, QUCCE12T, WEQUATRO, RHBD10T, RHBD12T, S4P8N, SEA14T, and SRRD12T. Simulation results indicate that all vulnerable nodes and key node pairs of the proposed cell can recover to their original states when affected by a soft error. Additionally, it can recover from key multinode upsets. The write speed of the proposed cell is found to be reduced by 20.3%, 50.1%, 74.1%, 63.7%, and 50.41% compared to 6T, DICE, QUCCE12T, WEQUATRO, and RHBD10T, respectively. The read speed of the proposed cell is found to be reduced by 56.6%, 52.2%, 62.5%, and 35.2% compared to 6T, SRRD12T, RHBD12T, and S4P8N, respectively. It also shows that the hold power of the proposed cell is found to be reduced by 14.1%, 13.8%, 17.7%, and 23.4% compared to DICE, WEQUATRO, RHBD10T, and RHBD12T. Furthermore, the read static noise margin (RSNM) of the proposed cell is found to be enhanced by 157%, 67%, and 32% compared to RHBD12T, SEA14T, and SRRD12T. All these improvements are achieved with a slight area penalty.

18 March 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
XGXiao-hui Guo
Xiao-hui Guo
HLHongjin Li
Hongjin Li
WHWeiqiang Hong
Weiqiang Hong
YZYunong Zhao
Yunong Zhao
QHQi Hong
Qi Hong
XZXiangchen Zhao
Xiangchen Zhao
Flexible pressure sensors have gained great attention for their application prospects in the field of wearable electronics and multi-dimensional human-machine interaction. We prepared a fourth-order star-structure consisting of four arrow-like concave triangular models by 3D printing. The starfish-inspired bionic capacitive pressure sensor can be obtained using such a dielectric layer with the negative Poisson’s ratio (NPR) effect. The fabrication process, structural parameters, design principles, sensing mechanism, and performance of the fourth-order star-structure capacitive pressure sensor (FSCPS) are discussed in detail. The FSCPS features a wide pressure sensing range of 0-500 kPa, a low detection limit of 1.6 Pa, a sensitivity of up to 2.151 kPa -1 over a range of 0 to 10 kPa, fast response/recovery times (55 and 60 ms) for pressure measurements, and good durability (~2000 cycles). The FSCPSs are integrated on a rubber glove to capture the electrical output generated by the gesture. The use of deep learning enables the recognition of different gestures, showing potential use in soft grasping and human-computer interaction. Our biomimetic manufacturing method can provide a strategy for fabricating flexible pressure sensors with high performance and low cost.

8 July 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
HJHan Jiang
Han Jiang
SLShuibao Liang
Shuibao Liang
姚徐姚华 徐
姚华 徐
SRSaranarayanan Ramachandran
Saranarayanan Ramachandran
Sintering of nano silver particles has been proven to be an effective technique for achieving the high-performance reliable interconnects required for microelectronics packaging of wide bandgap semiconductors. However, the porous structure of sintered silver induces the porosity and morphology dependencies of the properties of the interconnects. Capturing the dynamic microstructure evolution and coarsening of sintered silver interconnects during service is still challenging for experimental studies. This study develops a phase field model to simulate the microstructure of porous sintered silver and its dynamic evolution under thermal aging. Then, the porous structure of sintered silver is imported into the finite element model to analyze the changes in the thermal and mechanical properties of the sintered silver. It is found that as the porosity increases, the thermal conductivity and yield strength gradually decrease, which is in good agreement with the experimental studies. With increasing aging time, except for the sintered specimen with a porosity of 60%, the thermal conductivity of the other porous sintered silver increases slightly; the elastic properties mainly depend on the porosity of the sintered samples, and the yield strength decreases during aging due to the coarsening of pores.

23 March 2023 in IEEE Communications Letters
Verified
Journal Article
Closed access
FJFang Jiang
Fang Jiang
DCDa-Wei Chang
Da-Wei Chang
SMSong Ma
Song Ma
YHYan-Jun Hu
Yan-Jun Hu
姚徐姚华 徐
姚华 徐
Sparse code multiple access (SCMA) is a code-domain non-orthogonal multiple access (NOMA) technology proposed to meet the access needs of large-scale intelligent terminal devices with high spectrum utilization. To improve the accuracy and computational complexity of SCMA to accommodate the internet of things (IoT) scenario, we design a new end-to-end autoencoder combining convolutional neural networks (CNNs) and residual networks. A residual network with multitask learning improves the decoding accuracy, and CNN units are used for SCMA codeword mapping, with sparse connectivity and weight-sharing to reduce the number of trainable parameters. Simulations show that this scheme outperforms existing autoencoder schemes in bit error rate (BER) and computational complexity.

12 November 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HJHan Jiang
Han Jiang
SLShuibao Liang
Shuibao Liang
姚徐姚华 徐
姚华 徐
SRSaranarayanan Ramachandran
Saranarayanan Ramachandran
Interfacial fatigue degradation and crack formation of wire bonds are one of the serious issues related to packaging in power modules that affect the reliability of power electronics. This work presents a new approach based on a combination of phase field modeling and finite element analysis to study the electro-thermo-mechanical behavior, the interface degradation and crack propagation processes of wire bonded interconnects in insulated-gate bipolar transistor (IGBT) power modules. The strain energy density obtained from the macroscale electro-thermo-mechanical analysis is transferred to the meso-scale phase field modeling to study the interface fatigue and crack propagation, considering the effect of wire grain morphology. The temperature and stress distribution characteristics of a typical IGBT power module with Al wire bonds under power cycling are investigated. Stress concentration at the interconnect interface caused by thermal strains between wire and chip is examined. The crack length increases with increasing cycle number. The presence of Al grain boundaries is found to have a significant impact on crack propagation, due to grain boundary energy and weakening effects. The developed model could provide new insights for predicting the lifetime and crack growth of power modules, and offer a pathway for the reliability optimization of wire bonds.

27 December 2021 in Electronics
Verified
Journal Article
Open access
PDF file
NBNa Bai
Na Bai
XLXiaolong Li
Xiaolong Li
姚徐姚华 徐
姚华 徐
Based on the SMIC 0.13 um CMOS technology, this paper uses a 0.8 V supply voltage to design a low-voltage, ultra-low-power, high-gain, two-stage, fully differential operational amplifier. Through the simulation analysis, when the supply voltage is 0.8 V, the design circuit meets the ultra-low power consumption and also has the characteristic of high gain. The five-tube, fully differential, and common-source amplifier circuits provide the operational amplifier with high gain and large swing. Unlike the traditional common-mode feedback, this paper uses the output of the common-mode feedback as the bias voltage of the five-tube operational transconductance amplifier load, which reduces the design cost of the circuit; the structure involves self-cascoding composite MOS, which makes the common-mode feedback loop more sensitive. The frequency compensation circuit adopts Miller compensation technology with zero-pole separation, which increases the stability of the circuit. The input of the circuit uses the current mirror. A small reference current is chosen to reduce power consumption. A detailed performance simulation analysis of this operational amplifier circuit is carried out on the Cadence spectre platform. The open-loop gain of this operational amplifier is 74.1 dB, the phase margin is 61°, the output swing is 0.7 V, the common-mode rejection ratio is 109 dB, and the static power consumption is only 11.2 uW.