Mehmet Emin ERGÜN

Dr. Mehmet Emin ERGÜN


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 December 2022 in BioResources
Verified
Journal Article
Closed access
MEMehmet Emin ERGÜN
Mehmet Emin ERGÜN
Chitosan foams with promising mechanical properties, heat-insulating ability, and flame retardancy were produced through oven drying. The chitosan foams were reinforced with cellulose, boric acid, and different ratios of activated carbon. The foams showed desirable low density (80.2 to 109.8 kg/m3) and compression properties. The compression resistance and compression modulus of foams ranged between 53.6 and 98.5 KPa and 214 to 394 KPa, respectively. Thermal conductivity tests revealed that the foams endowed low thermal conductivity values (0.035 to 0.051 W/mK). The limiting oxygen index (LOI) of the foams was as high as 32.9% for activated carbon (20 g/L). The activated carbon reinforcement produced higher thermal properties and decreased the mass loss 48.1% at 600 °C. The produced foams exhibited good biodegradability (39% degradation in 15 days). The overall test results showed that the chitosan foams can be utilized as a promising environmentally friendly material in thermal insulation fields.

8 March 2024 in Polymers
Verified
Journal Article
Open access
PDF file
HEHalime ERGUN
Halime ERGUN
MEMehmet Emin ERGÜN
Mehmet Emin ERGÜN
Xanthan gum is commonly used in the pharmaceutical, cosmetic, and food industries. However, there have been no studies on utilizing this natural biopolymer as a foam material in the insulation and packaging sectors, which are large markets, or modeling it using an artificial neural network. In this study, foam material production was carried out in an oven using different ratios of cellulose fiber and xanthan gum in a 5% citric acid medium. As a result of the physical and mechanical experiments conducted, it was determined that xanthan gum had a greater impact on the properties of the foam material than cellulose. The densities of the produced foam materials ranged from 49.42 kg/m3 to 172.2 kg/m3. In addition, the compressive and flexural moduli were found to vary between 235.25 KPa and 1257.52 KPa and between 1939.76 KPa and 12,736.39 KPa, respectively. Five machine-learning-based methods (multiple linear regression, support vector machines, artificial neural networks, least squares methods, and generalized regression neural networks) were utilized to analyze the effects of the components used in the foam formulation. These models yielded accurate results without time, material, or cost losses, making the process more efficient. The models predicted the best results for density, compression modulus, and flexural modulus achieved in the experimental tests. The generalized regression neural network model yielded impressive results, with R2 values above 0.97, enabling the acquisition of more quantitative data with fewer experimental results.

22 August 2023 in Coatings
Verified
Journal Article
Open access
PDF file
MEMehmet Emin ERGÜN
Mehmet Emin ERGÜN
IÖİsmail Özlüsoylu
İsmail Özlüsoylu
AIAbdullah İstek
Abdullah İstek
Ahmet CanAhmet Can
Ahmet Can
Nowadays, the particleboard industry cannot meet the market’s demand. Therefore, filler materials have started to be used both to conserve raw materials and to enable the use of wood-based boards in different areas. This study investigates the effects of incorporating different ratios of activated carbon (0%, 1.5%, 4.5%, 7.5%) on the properties of particleboards. The physical properties were examined, including density, moisture content, thickness swelling, and water absorption. The results reveal that the density increased with increasing activated carbon content while the moisture content decreased, indicating improved dimensional stability and water resistance. Additionally, the color properties were influenced by activated carbon, leading to a darker appearance with decreased lightness and yellow-blue components. The mechanical properties, such as internal bond strength, modulus of rupture, and modulus of elasticity, showed significant enhancements with the addition of activated carbon, indicating improved bonding and increased strength. Moreover, the thermal conductivity decreased with increasing activated carbon content and improved insulation performance. Scanning electron microscope analysis confirmed the uniform distribution of activated carbon within the particleboard matrix, without agglomeration, positively impacting the mechanical performance. According to the thermogravimetric analysis results, the addition of activated carbon led to a decrease of up to 6.15% in mass loss compared to the control group. The incorporation of activated carbon at a ratio of 4.5% in particleboards confers notable enhancement to their physical, mechanical, and thermal characteristics. These findings contribute to understanding the potential benefits and considerations of using activated carbon as an additive in particleboard production.

23 December 2023 in Biofuels, Bioproducts and Biorefining
Verified
Journal Article
Open access
Deniz AydemirDeniz Aydemir
Deniz Aydemir
MEMehmet Emin ERGÜN
Mehmet Emin ERGÜN
SEZGIN KORAY GÜLSOYSEZGIN KORAY GÜLSOY
SEZGIN KORAY GÜLSOY
ZOZeynep Eda Ozan
Zeynep Eda Ozan
GGGokhan Gunduz
Gokhan Gunduz
The aim of this study was to produce activated carbon (AC) from lignin obtained with deep eutectic solvents (DESs) of choline chloride–lactic acid. For this, lignin particles were produced using the DES. The DES lignin (DES‐Lig) was modified with zinc dichloride, and the lignin activated carbon (lig‐AC) was produced by carbonization at 600 and 900 °C. In this study, the AC obtained from the commercial lignin was also used to determine the changes in the lig‐AC from the lignin obtained with the DES. The material properties were investigated using Brunauer–Emmett–Teller (BET) surface analysis, scanning electron microscopy (SEM) and thermogravimetric analysis (TGA), and the structural properties were investigated with X‐ray diffractometry (XRD) of the lig‐ACs. The commercial and DES‐Lig exhibited different microscopic morphologies. The surface area of the samples generally ranged from 504 to 698 g/cm2, and they included both micro‐ and mesopores according to SEM characterization. The XRD analysis showed that the ACs obtained have an amorphous structure, and thermogravimetric analysis of the ACs exhibited similar thermal behavior to that in the literature. The best morphological structure was found in the ACs prepared from lignin with the DES at 900 °C according to the results of SEM, TGA, XRD and BET analysis. The proximate analysis showed that the best ACs contain 1.5% moisture, 6.5% volatile matter, 5.5% ash content and 86.5% fixed carbon. According to the elemental analysis, the amounts of essential elements, including C, H, N and O were investigated, and the best activated carbon was determined to be the DES‐Lig at 900 °C according to BET and the proximate fixed carbon results.

15 December 2022 in International Advanced Researches and Engineering Journal
Verified
Journal Article
Open access
PDF file
MEMehmet Emin ERGÜN
Mehmet Emin ERGÜN
SBSaban Bulbul
Saban Bulbul
In this study, the producibility of activated carbon from wood waste by using the chemical activation method was investigated and the produced activated carbon was compared with commercial activated carbon. Activated carbon was produced from black poplar wood waste using zinc chloride and phosphoric acid. The density values of the produced activated carbons were determined by the picometer method. Field Emission Scanning Electron Microscopy (FESEM) was used to analyze the microstructure and perform the elemental mapping. To determine the chemical content of activated carbon, it was also characterized by Fourier-transform infrared spectroscopy (FTIR) and energy dispersion spectroscopy (EDS). Based on the density and FE-SEM results, it was determined that the produced activated carbon had a lower density and porous structure. In addition, EDS analysis showed that the activated carbon produced from black poplar wood waste was purer than commercial activated carbon.

1 January 2022 in Materials Research
Verified
Journal Article
Open access
NYNadir Yildirim
Nadir Yildirim
EOErtan Ozen
Ertan Ozen
MEMehmet Emin ERGÜN
Mehmet Emin ERGÜN
BDBerk Dalkilic
Berk Dalkilic