With an increased interest in the use of molten salts in both nuclear and non-nuclear systems, measuring important thermophysical properties of specific salt mixtures becomes critical in understanding salt performance and behavior. One of the more basic and significant thermophysical properties of a given salt system is density as a function of temperature. With this in mind, this work aims to present and layout a novel approach to measuring densities of molten salt systems using neutron radiography. This work was performed on Flight Path 5 at the Los Alamos Neutron Science Center at Los Alamos National Laboratory. In order to benchmark this initial work, three salt mixtures were measured, NaCl, LiCl (58.2 mol%) + KCl (41.8 mol%), and MgCl (32 mol%) + KCl (68 mol%). Resulting densities as a function of temperature for each sample from this work were then compared to previous works employing traditional techniques. Results from this work match well with previous literature values for all salt mixtures measured, establishing that neutron radiography is a viable technique to measure density as a function of temperature in molten salt systems. Finally, advantages of using neutron radiography over other methods are discussed and future work in improving this technique is covered.
1 June 2021 in Journal of the Electrochemical Society
In this report, we describe the use of the Mg2+/0 couple as a reference in molten MgCl2-NaCl. We demonstrate that this redox couple provides a robust and reliable reference potential over a range of melt temperatures (500 °C–675 °C). Finally, we demonstrate the construction of a simple molten magnesium reference electrode, for operation at temperatures greater than the melting point of magnesium (650 °C).
1 January 2024 in Review of Scientific Instruments
Molten salt reactors (MSRs) are a promising alternative to conventional nuclear reactors as they may offer more efficient fuel utilization, lower waste generation, and improved safety. The state of knowledge of the properties of liquid salts is far from complete. In order to develop the MSR concept, it is essential to develop a fundamental understanding of the thermodynamic properties, including the heat capacities (Cp) and enthalpies of mixing (ΔHmix), of molten salts at MSR operating conditions. Historically, the Cp values of molten salts were determined by drop-calorimetry or differential scanning calorimetry, whereas their ΔHmix values were typically measured using specialized high temperature calorimeters. In this work, a new methodology for measuring both the Cp and the ΔHmix of molten chloride salts was developed. This novel method involves sealing a chloride salt sample in a nickel capsule and performing conventional transposed temperature drop calorimetry using a commercially available Setaram AlexSYS-800 Tian–Calvet twin microcalorimeter. This methodology may be applied to calorimetric measurements of more complex salt mixtures, especially mixtures containing actinides and fission products.