Julio Silva

Mr. Julio Silva

Universidade de São Paulo - USP
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 May 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Julio SilvaJulio Silva
Julio Silva
LGLuan Grilo
Luan Grilo
Alessandro GandiniAlessandro Gandini
Alessandro Gandini
TLTalita Martins Lacerda
Talita Martins Lacerda
This paper provides an overview of the recent progress in research and development dealing with polymers derived from plant oils. It highlights the widening interest in novel approaches to the synthesis, characterization, and properties of these materials from renewable resources and emphasizes their growing impact on sustainable macromolecular science and technology. The monomers used include unmodified triglycerides, their fatty acids or the corresponding esters, and chemically modified triglycerides and fatty acid esters. Comonomers include styrene, divinylbenzene, acrylics, furan derivatives, epoxides, etc. The synthetic pathways adopted for the preparation of these materials are very varied, going from traditional free radical and cationic polymerizations to polycondensation reactions, as well as metatheses and Diels–Alder syntheses. In addition to this general appraisal, the specific topic of the use of tung oil as a source of original polymers, copolymers, and (nano)composites is discussed in greater detail in terms of mechanisms, structures, properties, and possible applications.


4 August 2022 in Coatings
Verified
Journal Article
Open access
PDF file
EBEletria Biswas
Eletria Biswas
Julio SilvaJulio Silva
Julio Silva
MKMujibur Khan
Mujibur Khan
Rafael QuirinoRafael Quirino
Rafael Quirino
Natural polymers, such as starch, and polymers derived from renewable resources, such as vegetable oils, have been considered as alternatives to petroleum-based plastics during recent decades, due to environmental concerns. Indeed, these materials can offer a variety of advantages, such as low cost, wide availability, carbon neutrality, elevated thermal stability, and easily tunable mechanical properties. However, some of these polymers alone exhibit poor mechanical properties, making them not suitable for some applications. Hence, the reinforcement of these bio-based polymers with other materials is often considered to overcome this challenge. In this work, thermosetting composites based on tung and linseed oil resins were prepared using starch as reinforcement. Analyses from Soxhlet extractions showed that the higher the concentration of tung oil in comparison to linseed oil in the resins, the lower the mass of unreacted material, leading to an optimum resin entirely based on tung oil. Dielectric analysis (DEA), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) indicated that the polymerization was completed in 3 h 20 min, at 140 °C, and that the composites were thermally stable until 270 °C. Finally, dynamic mechanical analysis (DMA) confirmed that the addition of starch to the resins increased the room temperature storage modulus (E′25) from 94 MPa to 893 MPa. Composites prepared with a resin formulation that did not contain a compatibilizer exhibited E′25 of 441 MPa. The composites investigated in this work are promising candidates for applications that require improved mechanical properties.

23 December 2022 in Coatings
Verified
Journal Article
Open access
PDF file
Julio SilvaJulio Silva
Julio Silva
HWHannah Walton
Hannah Walton
SDSeth Dever
Seth Dever
KKKamran Kardel
Kamran Kardel
TLTalita Martins Lacerda
Talita Martins Lacerda
Rafael QuirinoRafael Quirino
Rafael Quirino
Unsaturated vegetable oils with conjugated carbon–carbon double bonds, such as tung oil, can undergo free-radical polymerization, originating alternatives to petroleum-based materials. The introduction of fillers to vegetable oil-based polymer matrices results in composites with improved mechanical properties. In this work, thermosets were synthesized by the free-radical polymerization of a mixture of tung oil, divinylbenzene, and n-butyl methacrylate, and reinforced with bio-based fillers, namely Miscanthus, Pinus taeda (also known as southern pine), and algae (Microspora and Oedogonium) biomass. The effect of filler particle size on the composites’ properties was evaluated. Additionally, to develop a better interaction between the hydrophobic resin and the hydrophilic reinforcements, and improve the mechanical properties of the composites prepared, itaconic anhydride, a bio-based molecule derived from itaconic acid, was added to the resin. Thermogravimetric analysis (TGA) showed that the presence of itaconic anhydride improved the overall thermal stability of the composites. The storage modulus of the composites at room temperature, assessed by dynamic mechanical analysis (DMA), was increased by approximately 32% and 68%, for Miscanthus and southern pine composites, respectively, when itaconic acid was added to the resin. It was also observed that the glass transition temperatures were not significantly affected by the presence of itaconic acid. Scanning electron microscope (SEM) images indicated better matrix-reinforcement adhesion in the presence of itaconic anhydride.

1 July 2023 in Coatings
Verified
Journal Article
Open access
PDF file
Julio SilvaJulio Silva
Julio Silva
SDSeth Dever
Seth Dever
ASAnthony J. Siccardi
Anthony J. Siccardi
DSDrew Snelling
Drew Snelling
IQIbrahim Al Qabani
Ibrahim Al Qabani
Rafael QuirinoRafael Quirino
Rafael Quirino
In this work, renewable composites were prepared by the association of a thermosetting resin synthesized via free-radical polymerization, using a mixture of tung oil, n-butyl methacrylate, and divinylbenzene, with silica-rich fillers, namely an algae biomass with high silica content, and a well-sorted sand. Furthermore, to investigate if the interaction between the non-polar resin and polar reinforcements could be improved, enhancing the materials’ mechanical properties, itaconic anhydride, a bio-derived molecule obtained from itaconic acid, was introduced to the resin composition. Thermogravimetric analysis (TGA) suggested that the thermal stability of the composites was overall not changed with the addition of itaconic anhydride. The mechanical properties of the sand composites, however, did improve, as the storage modulus at room temperature, measured by dynamic mechanical analysis (DMA), almost doubled in the presence of itaconic anhydride. The glass transition temperatures of the materials increased by approximately 30 °C when sand was used as a reinforcement. Water absorption experiments validated an increase in the polarity of the unreinforced resin by the addition of itaconic anhydride to its formulation. The composites, however, did not exhibit a significant difference in polarity in the presence of itaconic anhydride. Finally, scanning electron microscopy (SEM), equipped with energy dispersive spectroscopy (EDS), demonstrated better matrix–filler adhesion in the presence of itaconic anhydride for high-silica algae composites.

21 October 2025 in ACS Omega
Verified
Journal Article
Open access
JAJulius A. Adeyera
Julius A. Adeyera
Julio SilvaJulio Silva
Julio Silva
KKKamran Kardel
Kamran Kardel
Rafael QuirinoRafael Quirino
Rafael Quirino
The increase in the demand for additively manufactured parts and the drive toward a sustainable economy with less environmental pollution has triggered the need for renewable materials for use in 3D printing. This study shows how the final properties of stereolythography (SLA) 3D-printed parts are affected by the number of carbon–carbon double bonds in vegetable oils used to prepare biobased free radical resins. The free radical resins developed in this study contain a minimum of 95 wt % biobased content and are readily polymerizable using a commercial SLA 3D printer. Two distinct vegetable oils, namely soybean and linseed oils, were epoxidized and then acrylated. The epoxidized, acrylated oils and their 50:50 (wt/wt) blend were used to demonstrate the influence of carbon–carbon double bond content on the final properties of SLA 3D-printed parts. The synthetic strategy adopted was successful and showed promise, leading to printed materials with good thermo-mechanical properties. More specifically, it is demonstrated herein that the degree of unsaturation of the oil has a direct impact on the tensile strength of parts printed via stereolithography, and that final properties can be tuned by blending resins prepared from different oils. Ultimately, parts printed with linseed oil displayed better properties than those printed with soybean oil.