Microwave processing of materials has been found to deliver enormous advantages over conventional processing methods in terms of mechanical and physical properties of the materials. However, the non-uniform temperature distribution is the key problem of microwave processing, which is related to the structure of the cavity, and the placement and physical parameters of the material. In this paper, a new microwave cavity structure with a sliding short based on phase-shifting heating is creatively proposed to improve the temperature uniformity. An electronic mathematical model based on the Finite Element Method (FEM) is built to predict the temperature distribution. Meanwhile, a new computational approach based on the theory of transformation optics is first provided to solve the problem of the moving boundary in the model simulation. At first, the experiment is carried out to validate the model, and heating results from the experiment show good agreement with the model’s prediction. Based on the verified model, materials selected among a wide range of dielectric constants are treated by stationary heating and phase-shifting heating. The coefficient of variation (COV) of the temperature and temperature difference has been compared in detail between stationary heating and phase-shifting heating. A significant improvement in heating uniformity can be seen from the temperature distribution for most of the materials. Furthermore, three other materials are also treated at high temperature and the heating uniformity is also improved. Briefly, the strategy of phase-shifting heating plays a significant role in solve the problem of non-uniform heating in microwave-based material processing. A 25%–58% increase in uniformity from adapting the phase-shifting method can be observed for the microwave-processed materials.
Microwaves have been widely used in the treatment of different materials. However, the existing adjustable power thermostatic reactors cannot be used to analyze materials characteristics under microwave effects. In this paper, a microwave thermostatic chemical reactor for processing liquid materials is proposed, by controlling the velocity of coolant based on PLC (programmable logic controller) in different liquid under different constant electric field intensity. A nonpolar coolant (Polydimethylsiloxane), which is completely microwave transparent, is employed to cool the liquid materials. Experiments are performed to measure the liquid temperature using optical fibers, the results show that the precision of temperature control is at the range of ±0.5 °C. Compared with the adjustable power thermostatic control system, the effect of electric field changes on material properties are avoided and it also can be used to detect the properties of liquid materials and special microwave effects.
The aim of this work is to present a model of a reaction tube with cross structures in order to improve ethyl acetate production and microwave heating uniformity. A commercial finite element software, COMSOL Multiphysics 4.3a (Newton, MA, USA), is used to build the proposed model for a BJ-22 rectangular waveguide system. Maxwell’s equations, the heat conduction equation, reaction kinetics equation and Navier-Stokes equation are combined to describe the continuous flow process. The electric field intensity, the temperature, the concentration of water, the coefficient of variation (COV) and the mean temperature at different initial velocities are compared to obtain the best flow rate. Four different initial velocities are employed to discuss the effect of flow velocity on the heating uniformity and heating efficiency. The point temperatures are measured by optical fibers to verify the simulated results. The results show the electric field intensity distributions at different initial velocities have little difference, which means the initial velocity will have the decisive influence on the heating process. At lower velocity, the COV will be smaller, which means better heating uniformity. Meanwhile, the distance between each cross structure has great influence on the heating uniformity and heating efficiency, while the angle has little. The proposed model can be applied to large-scale production of microwave-assisted ethyl acetate production.