This research investigated the effect of ion concentration on the performance of low salinity water under different conditions. First, the effect of injection water composition on interparticle forces in quartz-kaolinite, kaolinite-kaolinite, and quartz-oil complexes was tested and modeled. The study used two oil samples, one with a high total acid number (TAN) and the other with a low TAN. The results illustrated that reducing the concentration of divalent ions to 10 mM resulted in the electric double layer (EDL) around the clay and quartz particles and the high TAN oil droplets, expanding and intensifying the repulsive forces. Next, the study investigated the effect of injection water composition and formation oil type on wettability and oil/water interfacial tension (IFT). The results were consistent with the modeling of interparticle forces. Reducing the divalent cation concentration to 10 mM led to IFT reduction and wettability alteration in high TAN oil, but low TAN oil reacted less to this change, with the contact angle and IFT remaining almost constant. Sandpack flooding experiments demonstrated that reducing the concentration of divalent cations incremented the recovery factor (RF) in the presence of high TAN oil. However, the RF increment was minimal for the low TAN oil sample. Finally, different low salinity water scenarios were injected into sandpacks containing migrating fines. By comparing the results of high TAN oil and low TAN oil samples, the study observed that fine migration was more effective than wettability alteration and IFT reduction mechanisms for increasing the RF of sandstone reservoirs.
One of the main challenges in screening of enhanced oil recovery (EOR) techniques is the class imbalance problem, where the number of different EOR techniques is not equal. This problem hinders the generalization of the data-driven methods used to predict suitable EOR techniques for candidate reservoirs. The main purpose of this paper is to propose a novel approach to overcome the above challenge by taking advantage of the Power-Law Committee Machine (PLCM) technique optimized by Particle Swam Optimization (PSO) to combine the output of five cutting-edge machine learning methods with different types of learning algorithms. The PLCM method has not been used in previous studies for EOR screening. The machine learning models include the Artificial Neural Network (ANN), CatBoost, Random Forest (RF), K-Nearest Neighbors (KNN), and Support Vector Machine (SVM). The CatBoost is used for the first time in this work for screening of EOR methods. The role of the PSO is to find the optimal values for the coefficients and exponents of the power-law model. In this study, a bigger dataset than those in previous studies, including 2563 successful worldwide EOR experiences, was gathered. A bigger dataset improves the generalization of the data-driven methods and prevents overfitting. The hyperparameters of the individual machine-learning models were tuned using the fivefold cross-validation technique. The results showed that all the individual methods could predict the suitable EOR method for unseen cases with an average score of 0.868. Among the machine learning models, the KNN and SVM had the highest scores with a value of 0.894 and 0.892, respectively. Nonetheless, after combining the output of the models using the PLCM method, the score of the predictions improved to 0.963, which was a substantial increase. Finally, a feature importance analysis was conducted to find out the most influential parameters on the output. The novelty of this work is having shown the ability of the PLCM technique to construct an accurate model to overcome the class-imbalance issue in EOR screening by utilizing different types of data-driven models. According to feature importance analysis, oil gravity and formation porosity were recognized as the most influential parameters on EOR screening.
28 October 2022 in Journal of Petroleum Science and Engineering
In this study a 2D cubic chamber model filled with paraffin is analyzed with and without the inclusion of magnetic Fe3O4 nanoparticles at concentrations of 0.5, 1, 1.5 and 2 wt%, and an external magnetic field of intensities 0.005, 0.01, 0.015 and 0.02 T. It is ascertained that adding magnetic nanoparticles leads the horizontal temperature gradient to be reduced owing to increments in thermal conductivity. Additionally, this feature is found to be accelerated by applying an external magnetic field, which shapes highly conductive cluster formations of nanoparticles. However, since the increase in nanoparticle concentration and magnetic intensity increases the composite viscosity, there is an optimum configuration while applying both schemes. As such, the addition of 1 wt% nanoparticles provides the best results, as the melting time is reduced up to 25% compared to pure paraffin. Meanwhile, the melting time of a 1 wt% nanoparticle-containing phase change material (PCM) in the presence of an external magnetic field is improved up to 24% compared to the case with no external magnetic field. Also, the heat transfer coefficient of a 1 wt% nanoparticle-containing PCM both with and without an external magnetic field is also staggeringly enhanced compared to pure paraffin. Good correspondence with experimental data was achieved.