For three decades, the solid and dissolved fluxes of the Congo River have been regularly monitored on a monthly basis, despite 12 years of deficiencies (1994–2005). Two programs successively carried out these follow-ups: PEGI/GBF (1987–1993) and SO HYBAM (2006–2017), upstream and downstream, respectively, of the Malebo Pool near Brazzaville, the main hydrometric station of the Congo River. The objective of this study is to examine the temporal dynamic of TSS, TDS and DOC, to explore how these descriptors change over time. Comparison with the two time programs will shed more light on how these descriptors are related to discharge. Afterward, we then find a relationship between total TSS in the water column and that measured in surface for eventual estimation of TSS by remote sensing. In the last decade, compared to the PEGI/GBF period, the discharge of the Congo River was mainly marked by a 4% increase, leading to a significant change on TDS and DOC behaviors. The TSS was quite stable (from 8.2 and 9.3 t km⁻² yr⁻¹) due to the low physical erosion well known in this region. The TDS concentrations decreased slightly, by a simple dilution effect. However, the mineral dissolved fluxes (from 11.6 and 10.1 t km^-2 yr^-1) due to the chemical weathering and atmospheric inputs still predominate over the solid fluxes. Therefore, there was no radical change in the monthly geochemical regime of Congo River Basin (CRB) during these last 30 years. Contrariwise, the DOC concentration marking the biogeochemical processes significantly increased, from 9.0+/−3.0 mg L⁻¹ to 12.7+/−5.0 mg L⁻¹, due to more flooding events in the central part of the CRB. The change for the DOC fluxes is more relevant, with an increase of 45% between the two studied periods, from 11.1 × 10⁶ to 16.2 × 10⁶ t yr⁻¹. This highlights the continuous and actual importance of the “Cuvette Centrale” in the heart of the CRB for dissolved organic matter transport by the Congo River.

In this study, the SWAT hydrological model was used to estimate the sediment yields in the principal drainage basins of the Congo River Basin. The model was run for the 2000–2012 period and calibrated using measured values obtained at the basins principal gauging station that controls 98% of the basin area. Sediment yield rates of 4.01, 5.91, 7.88 and 8.68 t km⁻² yr⁻¹ were estimated for the areas upstream of the Ubangi at Bangui, Sangha at Ouesso, Lualaba at Kisangani, and Kasai at Kuto-Moke, respectively—the first three of which supply the Cuvette Centrale. The loads contributed into the Cuvette Centrale by eight tributaries were estimated to be worth 0.04, 0.07, 0.09, 0.18, 0.94, 1.50, 1.60, and 26.98 × 10⁶ t yr⁻¹ from the Likouala Mossaka at Makoua, Likouala aux Herbes at Botouali, Kouyou at Linnegue, Alima at Tchikapika, Sangha at Ouesso, Ubangi at Mongoumba, Ruki at Bokuma and Congo at Mbandaka, respectively. The upper Congo supplies up to 85% of the fluxes in the Cuvette Centrale, with the Ubangi and the Ruki contributing approximately 5% each. The Cuvette Centrale acts like a big sink trapping up to 23 megatons of sediment produced upstream (75%) annually.