A high numerical aperture (NA = 0.92) square all-silicon metalens is designed for a wavelength of λ = 0.11883 mm with a focal length of 16.8 λ and a side length of 104.4 λ . Based on the waveguide effect, anisotropic rectangular silicon pillars with different dimensions are arranged on the silicon substrate according to the conical phase distribution, and then the rotation angle of each rectangular pillar is adjusted to realize the polarization conversion. Furthermore, a polarization-independent square antireflection silicon pillar array is proposed to be patterned at the other side of the substrate. The metalens can efficiently convert the normally incident x - (or y -) polarized plane wave into the radially (or azimuthally) polarized beam and conduct the sub-diffraction tight-focusing simultaneously, thus the shape of the focus can be flexibly switched. The numerical simulation results show that, under high-NA conditions, our metalens can obtain a tighter focus compared with linearly polarized metalens and a longer depth of focus (DOF) compared with metalens based on the hyperboloidal phase distribution. Under x - (or y -) polarized plane wave incidence, a circular-spot-shaped (or doughnut-shaped) focus with a full width at half maximum of 0.4 λ (or 0.3 λ ) is obtained and the DOF is 26.509 λ (or 18.935 λ ). In addition, under x -polarized beam incidence, the influence of the incident beam intensity distribution on the focusing results is also discussed. The use of a single material makes our metalens more favorable in fabrication and it is expected that our study is of great significance for applying terahertz wave in imaging and communication systems, high-resolution microscopy, optical coherence tomography and manipulation of particles.
An off-axis transmissive all-dielectric square metasurface with a side length of 55 mm is designed and studied in this paper. It can shape the 2.52 terahertz Gaussian beam into a rigorous plane wave (we define the required field-quality of the rigorous plane wave region: peak-to-peak amplitude ripple less than 1 dB and phase ripple less than 10°). The metasurface is composed of silicon cylindrical resonators whose phase modulation can almost span over the entire 2π range and the poly (4-methyl-1-pentene) substrate. The diameters of the resonators are from 11 to 35 μm and the heights of them are all 60 μm. The working range of the obtained plane wave is calculated by the physical optics integral formula when the off-axis angle is 22°. The results show that when the off-axis propagation distance is 1050 mm, the area satisfying the plane wave condition is 17×20 mm2, and the diffraction efficiency (we define the diffraction efficiency: the ratio of the total light field energy on the target plane to the total energy of light field that is just after the metasurface along the propagation of incident light) of the rigorous plane wave region cross-section is 23.4%. In addition, a random silicon cylinder diameter fabrication error within ± 4.5 μm is taken into account for the actual fabrication condition. The error satisfies the normal distribution with a mean of 0 μm and a standard deviation of 3 μm. The influence of the fabrication error on the shaping result is studied. We anticipate that the whole study will have certain pragmatic applications in some fields, such as enlarging the capture area of terahertz optical tweezers.
13 July 2021 in Journal of Physics D: Applied Physics
Based on the all-silicon metasurface, we study the propagation characteristics of the abruptly autofocusing terahertz (THz) ring-Airy beam when its primary ring is blocked. Identical rectangular silicon pillars with meticulously designed rotation angles are arranged on a silicon substrate to shape the incident linearly polarized plane wave into a cross-polarized blocked ring-Airy beam. The transmission efficiency of the metasurface can be up to 77.57% since a polarization-independent square silicon pillar array is patterned at the other side of the substrate to suppress the reflection loss. Compared to the ring-Airy beam, the abruptly autofocusing property of the blocked ring-Airy beam is promoted since the intensity contrast at the focus is greatly enhanced. In addition, the focus of the blocked ring-Airy beam is smaller and the focus position of it slightly moves forward. The principle feasibility of the metasurface and influences of imperfections on the propagation characteristics of the generated blocked ring-Airy beam are also discussed. Our study is expected to be of great significance for applying THz waves in manipulation of particles and biomedicine.