A doubling of the photocurrent due to light trapping is demonstrated by the combination of silver nanoparticles with a highly reflective back scatterer fabricated by Snow Globe Coating on the rear of a 2 μm polycrystalline silicon thin film solar cell. The binder free high refractive index titania particles can overcome light losses due to transmission. Modelling indicates that adding plasmonic nanoparticles to the back scatterer widens the angular distribution of scattered light such that over 80% of long wavelength light is scattered outside the Si/air loss cone and trapped in the cell, compared to 30% for the titania alone.
1 December 2014 in Journal of Solid State Chemistry
Progressive chemical .delithiation of commercially available lithium cobalt oxide (LiCoO2) showed consecutive changes in the crystal properties. Rietveld refinement of high resolution X-ray and neutron diffraction revealed an increased lattice parameter c and a reduced lattice parameter a for chemically delithiated samples. Using electron microscopy we have also followed the changes in the texture of the samples towards what we have found is a critical layer stoichiometry of about LixCoO2 with x=1/3 that causes the grains to exfoliate. The pattern of etches by delithiation suggests that unrelieved strain fields may produce chemical activity.
15 May 2012 in Progress in Photovoltaics: Research and Applications
In this work Substrate Induced Coagulation (SIC) was used to coat the cathode material LiCoO2, commonly used in Li-ion batteries, with fine nano-sized particulate titania. Substrate Induced Coagulation is a self-assembled dip-coating process capable of coating different surfaces with fine particulate materials from liquid media. A SIC coating consists of thin and rinse-prove layers of solid particles. An advantage of this dip-coating method is that the method is easy and cheap and that the materials can be handled by standard lab equipment. Here, the SIC coating of titania on LiCoO2 is followed by a solid-state reaction forming new inorganic layers and a core–shell material, while keeping the content of active battery material high. This titania based coating was designed to confine the reaction of extensively delithiated (charged) LiCoO2 and the electrolyte. The core–shell materials were characterized by SEM, XPS, XRD and Rietveld analysis.
10 February 2007 in Microporous and Mesoporous Materials