Global vibration-based methods in the field of structural health monitoring are intended to capture structural stiffness changes of buildings or other civil engineering structures. Natural frequencies of buildings or bridges are commonly used parameters to monitor these stiffness changes. Therefore, it is essential to clarify the limit at which this method is no longer sensitive enough to be useful for structural health monitoring purposes. This paper numerically investigates the effect of structural damage and soil–structure interaction on cellular-type reinforced concrete buildings’ natural frequencies. These buildings are a common housing stock of Eastern Europe but are rarely investigated in this context. Comparisons with a reinforced concrete frame and infill structure building are made. Finite element models representing three structural system types of nine-story reinforced concrete buildings were used for the numerical simulations. Furthermore, a five-story finite element model was used for a damage sensitivity comparison. It is established that, for cellular-type structure buildings to detect damage comparable to that investigated in the paper, structural health (fixed base model frequency) should be monitored directly. Then, a statistical significance level for frequency changes of no more than 0.1% should be adopted. Conversely, the rocking frequency is a very sensitive parameter to monitor building base condition changes. These changes are often a cause of the cracking of building elements.

Structural health monitoring (SHM) provides an opportunity to assess and predict changes in the technical condition of structures during the operation of a building. Structural damage, as well as several operational and environmental conditions, causes changes in modal parameters. Temperature is the most popular environmental condition which is used for research. However, to the authors’ knowledge, this is the first investigation that highlights the effect of groundwater level change on the natural frequencies of the buildings and the impact of possible damage detection features. Groundwater level change can influence structural health monitoring measurements and cause faulty structural damage identification using vibration-based methods. This paper aims to analyse the impact of the groundwater level changes on the modal parameters of mid-rise reinforced concrete buildings. The modal parameters of mid-rise reinforced concrete buildings are determined using finite element (FE) models. Three different FE models of structural system types of nine-storey reinforced concrete (RC) buildings with shallow foundations are used to determine the impact of groundwater level fluctuation on the values of the buildings’ natural frequencies. Changes in the groundwater level have an impact on the natural frequencies of the mid-rise reinforced concrete buildings. This research proposes a new environmental condition that has to be considered to identify the structural damage using the vibration-based method. It is found that groundwater level rise causes a decrease in the natural frequency value. In this research, it is established that the influence of the groundwater level on the natural frequencies of the buildings can change abruptly, and there is a non-linear correlation between groundwater level change and natural frequencies of the buildings. The natural frequencies of the buildings can change under varying environmental conditions as well as in the case of structural damage. To identify structural damage in the long-term structural health monitoring measurements, it is recommended to select features which are sensitive to structural damage but are not affected by groundwater level change. Data normalisation and elimination using linear correlation methods can be used for short-term SHM under varying seasonal groundwater level change.