Farzan Farhangian

Dr. Farzan Farhangian


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 October 2020 in Sensors
Verified
Journal Article
Open access
PDF file
FFFarzan Farhangian
Farzan Farhangian
RLRene Jr Landry
Rene Jr Landry
A Multi-Constellation Software-Defined Receiver (MC-SDR) is designed and implemented to extract the Doppler measurements of Low Earth Orbit (LEO) satellite’s downlink signals, such as Orbcomm, Iridium-Next, Globalstar, Starlink, OneWeb, SpaceX, etc. The Doppler positioning methods, as one of the main localization algorithms, need a highly accurate receiver design to track the Doppler as a measurement for Extended Kalman Filter (EKF)-based positioning. In this paper, the designed receiver has been used to acquire and track the Doppler shifts of two different kinds of LEO constellations. The extracted Doppler shifts of one Iridium-Next satellite as a burst-based simplex downlink signal and two Orbcomm satellites as continuous signals are considered. Also, with having the Two-Line Element (TLE) for each satellite, the position, and orbital elements of each satellite are known. Finally, the accuracy of the designed receiver is validated using an EKF-based stationary positioning algorithm with an adaptive measurement matrix. Satellite detection and Doppler tracking results are analyzed for each satellite. The positioning results for a stationary receiver showed an accuracy of about 132 m, which means 72% accuracy advancements compared to single constellation positioning.

28 September 2021 in Aerospace
Verified
Journal Article
Open access
PDF file
FFFarzan Farhangian
Farzan Farhangian
Hamza BenzerroukHamza Benzerrouk
Hamza Benzerrouk
RLRene Jr Landry
Rene Jr Landry
With the emergence of numerous low Earth orbit (LEO) satellite constellations such as Iridium-Next, Globalstar, Orbcomm, Starlink, and OneWeb, the idea of considering their downlink signals as a source of pseudorange and pseudorange rate measurements has become incredibly attractive to the community. LEO satellites could be a reliable alternative for environments or situations in which the global navigation satellite system (GNSS) is blocked or inaccessible. In this article, we present a novel in-flight alignment method for a strapdown inertial navigation system (SINS) using Doppler shift measurements obtained from single or multi-constellation LEO satellites and a rotation technique applied on the inertial measurement unit (IMU). Firstly, a regular Doppler positioning algorithm based on the extended Kalman filter (EKF) calculates states of the receiver. This system is considered as a slave block. In parallel, a master INS estimates the position, velocity, and attitude of the system. Secondly, the linearized state space model of the INS errors is formulated. The alignment model accounts for obtaining the errors of the INS by a Kalman filter. The measurements of this system are the difference in the outputs from the master and slave systems. Thirdly, as the observability rank of the system is not sufficient for estimating all the parameters, a discrete dual-axis IMU rotation sequence was simulated. By increasing the observability rank of the system, all the states were estimated. Two experiments were performed with different overhead satellites and numbers of constellations: one for a ground vehicle and another for a small flight vehicle. Finally, the results showed a significant improvement compared to stand-alone INS and the regular Doppler positioning method. The error of the ground test reached around 26 m. This error for the flight test was demonstrated in different time intervals from the starting point of the trajectory. The proposed method showed a 180% accuracy improvement compared to the Doppler positioning method for up to 4.5 min after blocking the GNSS.

21 July 2020 in Sensors
Verified
Journal Article
Open access
PDF file
FFFarzan Farhangian
Farzan Farhangian
RLRene Jr Landry
Rene Jr Landry
Accurate attitude and heading reference system (AHRS) play an essential role in navigation applications and human body tracking systems. Using low-cost microelectromechanical system (MEMS) inertial sensors and having accurate orientation estimation, simultaneously, needs optimum orientation methods and algorithms. The error of attitude estimation may lead to imprecise navigation and motion capture results. This paper proposed a novel intermittent calibration technique for MEMS-based AHRS using error prediction and compensation filter. The method, inspired from the recognition of gyroscope’s error and by a proportional integral (PI) controller, can be regulated to increase the accuracy of the prediction. The experimentation of this study for the AHRS algorithm, aided by the proposed prediction filter, was tested with real low-cost MEMS sensors consists of accelerometer, gyroscope, and magnetometer. Eventually, the error compensation was performed by post-processing the measurements of static and dynamic tests. The experimental results present about 35% accuracy improvement in attitude estimation and demonstrate the explicit performance of proposed method.

14 July 2022 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Verified
Journal Article
Closed access
FFFarzan Farhangian
Farzan Farhangian
RLRene Jr Landry
Rene Jr Landry
An inertial navigation method augmented by Signals of Opportunity (SOPs) of three low earth orbit (LEO) constellations is presented. The downlink signal characteristics of the Iridium-NEXT, Orbcomm, and Globalstar LEO constellations are discussed. Furthermore, a tightly coupled integration model of the inertial navigation system and high-order LEO-SOP Doppler measurement model is designed. We presented a second-order measurement model of the LEO-SOP/INS integration using a second-order extended Kalman filter in which all the unknown states of the receiver and LEO satellites are estimated. The state parameters of the second-order EKF model are the position and velocity of both the receiver and the satellites, as well as the receiver’s orientation, the clock bias, and clock drift of the LEO satellites, and the constant bias of the Inertial Measurement Unit. An experiment is performed using a ground aerial vehicle equipped with a Multi-Constellation Software-Defined Receiver (MC-SDR). The Doppler measurements are provided by observing the downlinks from multiple satellites of the Iridium-NEXT and Orbcomm constellations. As well, the predicted measurement of a Globalstar satellite is used in the designed model. The results show the positioning accuracy of less than 10 m being achieved during a dynamic ground experiment, representing an 82% precision gain as compared against the regular single constellation EKF method.

22 May 2021 in Sensors
Verified
Journal Article
Open access
PDF file
FFFarzan Farhangian
Farzan Farhangian
MSMohammad Sefidgar
Mohammad Sefidgar
RLRene Jr Landry
Rene Jr Landry
The advancement of indoor Inertial Navigation Systems (INS) based on the low-cost Inertial Measurement Units (IMU) has been long reviewed in the field of pedestrian localization. There are various sources of error in these systems which lead to unstable and unreliable positioning results, especially in long term performances. These inaccuracies are usually caused by imperfect system modeling, inappropriate sensor fusion models, heading drift, biases of IMUs, and calibration methods. This article addresses the issues surrounding unreliability of the low-cost Micro-Electro-Mechanical System (MEMS)-based pedestrian INS. We designed a novel multi-sensor fusion method based on a Time of Flight (ToF) distance sensor and dual chest- and foot-mounted IMUs, aided by an online calibration technique. An Extended Kalman Filter (EKF) is accounted for estimating the attitude, position, and velocity errors, as well as estimation of IMU biases. A fusion architecture is derived to provide a consistent velocity measurement by operative contribution of ToF distance sensor and foot mounted IMU. In this method, the measurements of the ToF distance sensor are used for the time-steps in which the Zero Velocity Update (ZUPT) measurements are not active. In parallel, the chest mounted IMU is accounted for attitude estimation of the pedestrian’s chest. As well, by designing a novel corridor detection filter, the heading drift is restricted in each straightway. Compared to the common INS method, developed system proves promising and resilient results in two-dimensional corridor spaces for durations of up to 11 min. Finally, the results of our experiments showed the position RMS error of less than 3 m and final-point error of less than 5 m.

14 September 2024 in Sensors
Verified
Journal Article
Open access
PDF file
BSBehnam Shakibafar
Behnam Shakibafar
FFFarzan Farhangian
Farzan Farhangian
JGJean-Marc Gagne
Jean-Marc Gagne
RLRene Jr Landry
Rene Jr Landry
FNFrederic Nabki
Frederic Nabki
This study introduces a reconfigurable and agile RF front-end (RFFE) architecture that significantly enhances the performance of software-defined radios (SDRs) by seamlessly adjusting to varying signal requirements, frequencies, and protocols. This flexibility greatly enhances spectrum utilization, signal integrity, and overall system efficiency—critical factors in aviation, where reliable communication, navigation, and surveillance systems are vital for safety. A versatile RF front-end is thus indispensable, enhancing connectivity and safety standards. We explore the integration of this flexible RF front-end in SDRs, focusing on the detailed design of essential components, such as receivers, transmitters, RF switches, combiners, and splitters, and their corresponding RF pathways. Comprehensive performance evaluations confirm the architecture’s reliability and functionality, including an extensive analysis of receiver gain, linearity, and two-tone test results. These assessments validate the architecture’s suitability for aviation radios and address considerations of size, weight, and power-cost (SWaP-C), demonstrating significant gains in operational efficiency and cost-effectiveness. The introduction of the new RF front-end on a single SDR board not only substantially reduces size and weight but also adds up to 18 dB gain to the received signal. It also allows for a high level of design flexibility, enabling seamless software transitions between different radios and the capacity to manage three times more radios with the same hardware, thereby significantly boosting the system’s ability to handle multiple radio channels efficiently.