The detailed mineralogical, physical and chemical characterization of nine samples of imported cosmetic talc and of two samples of talc from currently non-productive Mexican ore deposits (Oaxaca and Puebla States) is presented. The imported cosmetic talc was classified into two groups, considering whether they are packed in the country of origin or in Mexico and considering their price. X-ray diffraction, infrared short wave, thermogravimetric analysis and scanning electron microscopy were used for mineralogical characterization. For the physical characterization, colorimetry and laser granulometry were used. The chemical composition (major, trace elements) was studied by ICP-MS. It was concluded that only the highest priced and imported in packaged form talcs meet the specific purity requirements for a talc of cosmetic type. The talcs that are packed in Mexico and the talc of the studied Mexican deposits present mineralogical and chemical impurities that make their use difficult in the manufacture of high-quality cosmetic talc. The low-price talc should not be sold as cosmetic talc, and the regulations in Mexico on this subject should be reviewed and updated.
16 November 2019 in Geostandards and Geoanalytical Research
The mineralogy of surface crusts and efflorescent salts of two old abandoned tailings (Xochula and Remedios) of the mining district of Taxco, Guerrero, was studied by short-wave infrared spectroscopy (SWIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The chemistry of the selected samples was studied with induced coupled plasma mass spectrometry (ICP–MS). Principal mineralogy is composed of hydrated sulfates of iron (di-trivalent), other less-soluble sulfates such as gypsum and jarosite, and oxides–hydroxides of iron, all of which are the result of the weathering of sulfides (mainly pyrite) accumulated in mining waste. Using quantitative X-ray diffraction (Rietveld method) and the spatial distribution of secondary minerals, two main zones (lateral and central) have been established in both tailings. The genetic model for their formation shows that the secondary iron minerals (sulfates, oxides, and hydroxides) in these deposits have been formed at least in three different stages, mainly by oxidation, dissolution, and precipitation processes in combination with dehydration and primary sulfides neutralization reactions. The chemical analyses of some salts confirm the presence of potentially toxic elements (PTE) in their structure and therefore indicate that the dissolution of the efflorescences in these deposits is a potential source of contamination during the wet season.
17 June 2021 in Geostandards and Geoanalytical Research