Reduction in size and power consumption of consumer electronics has opened up many opportunities for low power wireless sensor networks. One of the major challenges is in supporting battery operated devices as the number of nodes in a network grows. The two main alternatives are to utilize higher energy density sources of stored energy, or to generate power at the node from local forms of energy. This paper reviews the state-of-the art technology in the field of both energy storage and energy harvesting for sensor nodes. The options discussed for energy storage include batteries, capacitors, fuel cells, heat engines and betavoltaic systems. The field of energy harvesting is discussed with reference to photovoltaics, temperature gradients, fluid flow, pressure variations and vibration harvesting.
Two cycles of thermomagnetic generation have been compared, one with a conventional ferromagnetic material and one using a Heusler alloy undergoing a first order phase transformation. The two have been analytically compared in terms of overall thermal-to-magnetic energy conversion efficiency. In addition, a state-space model of a thermomagnetic generator has been developed and analyzed in order to compare the performance of the two in terms of response to decreased thermal difference and changes in plate separation. Both analytical calculations and simulation indicated a large difference in operational behavior between the two materials, with the Heusler alloy's behavior being characterized by latent heat and large changes in magnetism, and the ferromagnet being characterized by a smaller heat input and more gradual magnetic change. The theoretical energy conversion efficiency of the Heusler alloy was calculated to be 0.2% under an external field of 3kOe, increasing to 0.8% under a field of 15kOe. These values corresponded to 15.9% and 63.8% of the Carnot limit, respectively, and compare favorably with the conversion efficiencies of ferromagnetic materials previously used in thermomagnetic generation.
Wireless power transmission is a method of supplying power to small electronic devices when there is no wired connection. One way to increase the range of these systems is to use a directional transmitting antenna, the problem with this approach is that power can only be transmitted through a narrow beam and directly forward, requiring the transmitter to always be aligned with the sensor node position. The work outlined in this article describes the design and testing of an autonomous radio frequency power transfer system that is capable of rotating the base transmitter to track the position of sensor nodes and transferring power to that sensor node. The system’s base station monitors the node’s energy levels and forms a charge queue to plan charging order and maintain energy levels of the nodes. Results show a radio frequency harvesting circuit with a measured S11 value of −31.5 dB and a conversion efficiency of 39.1%. Simulation and experimentation verified the level of power transfer and efficiency. The results of this work show a small network of three nodes with different storage types powered by a central base node.
Over the last decade, wireless devices have decreased in size and power requirements. These devices generally use batteries as a power source but can employ additional means of power, such as solar, thermal or wind energy. However, sensor networks are often deployed in conditions of minimal lighting and thermal gradient such as densely wooded environments, where even normal wind energy harvesting is limited. In these cases a possible source of energy is from the motion of the trees themselves. We investigated the amount of energy and power available from the motion of a tree in a sheltered position, during Beaufort 4 winds. We measured the work performed by the tree to lift a mass, we measured horizontal acceleration of free movement, and we determined the angular deflection of the movement of the tree trunk, to determine the energy and power available to various types of harvesting devices. We found that the amount of power available from the tree, as demonstrated by lifting a mass, compares favourably with the power required to run a wireless sensor node.