Plate-type heat exchangers are anticipated to be used in the next-generation nuclear industry, and solid-state diffusion welding is a critical technology for building plate-type heat exchangers with high integrity. In this study, we manufactured a diffusion weldment and evaluated its creep behavior. Microscopic analysis revealed that Al-rich oxides were developed along the interface, significantly impeding grain-boundary movement across the interface. Oxide-containing planar grain boundaries resulted in premature brittle fracture at the interface with less than 9% creep strain under all test conditions. The time to rupture and time to 1% creep strain of the diffusion weldment were less than those of the as-received alloy, while the slopes in double-logarithmic plots were almost identical for both alloys. In a Larson–Miller parameter study, the stress to rupture of the diffusion weldment reached 95.59% of that of the as-received alloy, whereas the stress to 1% creep strain steeply decreased in the low-stress range.

Diffusion welding of heat-resistant alloys has attracted interest in the manufacturing of components with complex configurations. Controlling secondary precipitates along the interface is necessary to enhance the quality of the diffusion welding. Surface treatment to increase the solubility product (K_sp) of Ti-rich carbide is proposed to accomplish such an enhancement. The reduction of secondary precipitates along the interface induced grain boundary migration across the interface. The chemical compositions at/near the interface satisfied the material specifications. The mechanical properties of the diffusion weldment were similar to those of Alloy 800H that underwent the same thermo-mechanical processes in the range of 25–700 °C. At 25 °C, the tensile strength was 553 MPa, which satisfied the minimum specified tensile strength described in ASTM B: 409-22. The location of failure was random in the gauge section, and dimples, the evidence of the macroscopic plastic deformation, were observed on the fracture surface.