This paper presents the results of the analysis conducted on six case studies related to solar energy integration in urban and rural environments located on the Italian territory. The analysis has been carried out within the Subtask C—Case Studies and Action Research of the International Energy Agency Solar Heating and Cooling Program Task 51 “Solar Energy in Urban Planning”. Three different environments hosting active and passive solar energy systems (existing urban areas, new urban areas, and agricultural/rural areas) have been investigated to attain lessons learned and recommendations. Findings suggest that (a) it is important to consider solar energy from the early stages of the design process onwards to achieve satisfactory levels of integration; (b) a higher level of awareness regarding solar potential at the beginning of a project permits acting on its morphology, achieving the best solution in terms of active and passive solar gains; (c) when properly designed, photovoltaic systems can act as characterizing elements and as a distinctive architectural material that is able to valorize the aesthetic of the entire urban intervention; (d) further significant outcomes include the importance of supporting the decision strategies with quantitative and qualitative analyses, the institution of coordinating bodies to facilitate the discussion between stakeholders, and the need for deep renovation projects to fully impact existing buildings’ stock; (e) when large solar installations are planned at the ground level, a landscape design approach should be chosen, while the ecological impact should be reduced by carefully planning the adoption of alternative solutions (e.g., agrivoltaics) compatible with the existing land use.

Recent statistical reports highlight an accelerating phenomenon of radical urbanization, and the forecasts estimate that within the next ten years, about 70% of the world’s population will be located in urban areas, compared with 54% currently living there. This phenomenon will result in an increase in the constructed volume, with foreseeable adverse effects on the climate, the environment, and residents’ health. The resulting growth of the emissions and the use of energy resources, combined with changes in the soil condition and absorption characteristics, leads to a focus on issues related to the sustainable development of cities. The effects of anthropogenic activity influence the materials’ surface and air temperatures, contributing to the phenomenon of the increase of the average atmospheric temperatures near the earth’s surface, with the consequent generation of the phenomenon of the urban heat islands (UHIs). This paper aims to examine, in a neighborhood context, the effects of mitigation strategies implemented through the application of cool materials on urban surfaces. Through simulations carried out in a case study, with the support of software such as ENVI-met and tools for Grasshopper such as Ladybug, and with the observation of data related to the evolution of the surface temperatures, the air temperatures, and other microclimatic parameters, the outcomes obtained with the use of cool pavements were analyzed. Finally, the comparison between the two scenarios, the current and the projected, allowed the evaluation of the overall efficiency of the proposed interventions.

Industrial districts are characterized by the presence of low and extensive building volumes and by predominantly sealed, impermeable surfaces, which contribute to several environmental problems and to the deterioration of outdoor human thermal comfort conditions, especially during summer hot days. To tackle these issues, this study proposes an approach for the regeneration of industrial districts based on the application of cool materials. Reflective and evaporative pavements were selected as suitable solutions to reduce summer overheating, while ensuring the functionality required by the industrial production, and contributing to stormwater management. The effectiveness of the approach was tested in a portion of the industrial district of Padua (Italy). In summer conditions, the replacement of conventional pavements with cool materials results in a reduction of the ground surface temperatures up to 14.0 °C and a consequent decrease of the air temperature at pedestrian level between 0.6 and 1.2 °C. The effects of human thermal comfort conditions highly depend on the selected cool material and on the morphology of the urban canyon. Finally, the reduction of external surface and air temperatures also contributes in cooling indoor spaces (average decrease from 1.0 to 2.5 °C), with impacts on the energy efficiency of the industrial buildings.

Unforeseen circumstances that occur anywhere in the world following natural disasters, humanitarian and health emergencies, armed conflicts, or in the presence of migratory flows, require adequate and immediate responses. This work aims to analyze the project requirements useful to realizing modular systems for residential, multifunctional, and hospital intended use, which, even if temporary, can ensure a high-performance standard in terms of comfort and energy efficiency, and at the same time guarantee the possibility of use in the widest possible range and in rapid execution times. The considered requirements have been those of settlement in the territory, energy efficiency, transportability, and re-usability. Temporary modular systems put in place with the abovementioned requirements are the basis of the design proposal; to realize this, they are made with dry technology to be reusable and energy-efficient. Furthermore, this enables the reduction of the minimum modules’ production and times of execution in applying both requirements of standardization and modular coordination. All these requirements also add to the ones relating to energy efficiency, transportability, and reusability, which are the pillars of the project for the achievement of performance above all in terms of standards and comfort levels as it is possible to find in the sustainable building of the living period.

Workplace safety, particularly in the construction industry, is a moral and legal imperative, prioritizing the protection of workers’ health and well-being. In Italy, Legislative Decree 81/08 (and subsequent modifications) serves as a regulatory framework for workplace safety, defining the duties of employers and employees and promoting accident prevention measures. Building information modeling technology, which has revolutionized the global construction industry by offering an integrated approach to design, construction, and management through intelligent digital models, has only recently started gaining traction in Italy as part of Industry 4.0. This article examines the potential of integrating the current prevention strategies with BIM technology to optimize safety design on construction sites. A case study demonstrates the use of the BIM software REVIT to model a water reservoir for an aqueduct, including structural and plant components, the surrounding context, and proposed construction site organization. The research methodology involves creating a contextualized 3D model to support preliminary safety assessments, work process organization, and the drafting of a safety and coordination plan. Through detailed analysis and critical discussion, this work contributes to understanding how the interaction of regulations and BIM technology can improve construction site safety, offering insights that are applicable beyond the Italian context to the global construction industry.

This paper presents a methodology to improve energy efficiency and sustainability in urban environments. The ongoing climate change is causing increasingly important consequences for cities and their inhabitants. Temperatures are rising and human thermal comfort conditions are becoming worse. For this reason, it is essential to evaluate how parts of cities react to these phenomena and how they could improve their behavior. To do this, the area of interest has to be analyzed from various aspects, starting with an assessment of the microclimatic conditions. Through these analyses, it is possible to observe the interactions between climate and the urban context on a macro-scale. The actual results, such as surface temperature and air temperature, will be useful for hypothesizing where different paved surfaces need to be restored with mitigative actions. Another aspect that needs to be considered for a comprehensive analysis of the area’s potential concerns the study of solar potential. We will describe how this topic was approached, making in-depth evaluations of the quality of the results obtained through the analysis of simplified models. The portability of these data within a spatial domain was also evaluated, integrating the values on a territorial database. Another important topic that needs to be analyzed to plan an improvement of an area in terms of energy production is the installation of new solar active production systems. The appropriate inclusion of photovoltaic panels could lead to the near self-sustainability of buildings by decreasing the external energy demand. The results obtained by applying the methodology in a case study highlight that all these aspects must be taken into account simultaneously to improve the existing conditions of entire city areas, leading to a more sustainable urban environment.