Flexible supercapacitors that can heal mechanical damage to improve their reliability and be repeatedly programmed into different geometries without sacrificing their specific capacitance are important for wearable electronics. In this study, healable and shape-editable supercapacitors are fabricated by sandwiching poly(acrylic acid)–poly(ethylene oxide) (PAA–PEO) hydrogel electrolytes between two pieces of carbon nanotube (CNT)-coated polyurethane–poly(ε-caprolactone) (PU–PCL) electrodes. The flexible, healable and shape-editable supercapacitor delivers a specific capacitance of ∼37 F g−1 at a scan rate of 0.5 A g−1 and exhibits an outstanding cycling performance with a capacitance retention of ∼96.5% after 10 000 charge/discharge cycles. Because of the healability of PU–PCL substrates and PAA–PEO hydrogel electrolytes, the fractured supercapacitors can heal physical damage and restore ∼92.6% of their original specific capacitance after 5 cutting/healing cycles upon heating at 75 °C. Moreover, benefiting from the shape memory ability of the PU–PCL substrates, the supercapacitors can be shape-edited to desired shapes with a high shape fixing and recovery ratio, and display a negligible decay in the specific capacitance during repeated shape-editing processes.
Prussian blue analogs (PBAs) are widely used as electrode materials for secondary batteries because of their cheapness, ease of synthesis, and unique structural properties. Nevertheless, the unsatisfactory capacity and cyclic stability of PBAs are seriously preventing their practical applications. Here, vanadium hexacyanoferrate (VHCF) is successfully prepared and used as a cathode for aqueous zinc-ion batteries (AZIBs). When using 3 M Zn(CF3SO3)2 as the electrolyte, a high capacity of ~230 mA h g−1 and a high voltage of ~1.2 V can be achieved. The XRD result and XPS analysis indicate that the outstanding Zn2+ storage capability is due to the presence of dual electrochemical redox centers in VHCF (Fe2+ ⇋ Fe3+ and V5+ ⇋ V4+ ⇋ V3+). However, the battery shows a short cycle life (7.1% remaining capacity after 1000 cycles) due to the dissolution of VHCF. To elongate the cycle life of the battery, a high-concentration hybrid electrolyte is used to reduce the activity of water molecules. The improved battery exhibits an impressive capacity of 235.8 mA h g−1 and good capacity retention (92.9%) after 1000 cycles.
Aqueous zinc-ion batteries (AZIBs) are promising candidates for large-scale energy storage because of their low cost and high safety. However, their practical applications are impeded by low energy density and short service life. Here, an aqueous Zn2+/Li+ hybrid-ion battery is fabricated using the LiV3O8 nanorods as the cathode, metallic Zn as the anode, and 3 M Zn(OTf)2 + 0.5 M LiOTf aqueous solution as the electrolyte. Compared with the batteries using pure 3 M Zn(OTf)2 electrolyte, the cycle performance of the hybrid-ion battery is significantly improved. After 4000 cycles at 5 A g1, the remaining capacity is 163.9 mA h g−1 with impressive capacity retention of 87.0%. Ex-situ XRD, ex-situ XPS, and SEM tests demonstrate that the hybrid electrolyte can inhibit the formation of the irreversible Zn3(OH)2V2O7·2H2O by-product and restrict Zn dendrite growth during cycling, thereby improving the cycle performance of the batteries.
Cathode materials with conversion mechanisms for aqueous zinc-ion batteries (AZIBs) have shown a great potential as next-generation energy storage materials due to their high discharge capacity and high energy density. However, improving their cycling stability has been the biggest challenge plaguing researchers. In this study, CuO microspheres were prepared using a simple hydrothermal reaction, and the morphology and crystallinity of the samples were modulated by controlling the hydrothermal reaction time. The as-synthesized materials were used as cathode materials for AZIBs. The electrochemical experiments showed that the CuO-4h sample, undergoing a hydrothermal reaction for 4 h, had the longest lifecycle and the best rate of capability. A discharge capacity of 131.7 mAh g−1 was still available after 700 cycles at a current density of 500 mA g−1. At a high current density of 1.5 A g−1, the maintained capacity of the cell is 85.4 mA h g−1. The structural evolutions and valence changes in the CuO-4h cathode material were carefully explored by using ex situ XRD and ex situ XPS. CuO was reduced to Cu2O and Cu after the initial discharge, and Cu was oxidized to Cu2O instead of CuO during subsequent charging processes. We believe that these findings could introduce a novel approach to exploring high-performance cathode materials for AZIBs.