Toroidal electromagnetic pulses have been recently reported as nontransverse, space-time nonseparable topological excitations of free space. However, their propagation dynamics and topological configurations have not been comprehensively experimentally characterized. In addition, the existing generators were limited in optical and terahertz domains; however, the feasibility and significance of generating such pulses at microwave frequencies have been overlooked. Here, we report that microwave toroidal pulses can be launched by a transient finite-aperture broadband horn antenna emitter, as an electromagnetic counterpart of “air vortex cannon.” Applying this effective generator, we experimentally map the toroidal pulses' topological skyrmionic textures in free space and demonstrate their resilient propagation dynamics, i.e., how that, during propagation, the pulses evolve toward stronger space-time nonseparability and closer proximity to the canonical Hellwarth–Nouchi toroidal pulses. Our work offers a practical opportunity for using topologically robust toroidal pulses as information carriers in high-capacity telecom, cell phone technology, remote sensing, and global positioning, especially where microwave frequencies are predominant.
3 December 2019 in IEEE Transactions on Antennas and Propagation
This paper presents a single-polarization and ultra-wideband tightly coupled dipole array (TCDA) with a compact, single-layer feeding network and a superstrate layer for wide-angle scanning. The feeding network based on a microstrip-to-slotline structure can significantly reduce the size and complexity of the array. The superstrate layer consists of two frequency selective surfaces, which can efficiently increase the scanning angle. The single-polarization TCDA has a bandwidth of 5.13:1 (0.75-3.85 GHz) with the simulated active VSWR < 3 in an infinite array. The scanning angle of the TCDA reaches up to ±60° in all planes and ±70° in the E plane and D plane. The profile of the fabricated TCDA with 16 × 16 elements is only 0.12 λat the largest working wavelength. The measured results of a subset of the array are consistent with the simulated.
20 November 2020 in IEEE Antennas and Wireless Propagation Letters
This letter proposes a wideband and wide-angle conjugate impedance matching (WWCIM) method and a WWCIM layer, which are applied to the tightly coupled dipole array (TCDA). The impedance matching problem over an ultrawideband can be well solved by using this method when the scanning angle reaches 70° in the H-plane. At the port position, the impedances of the ultrawideband-phased array change sharply at different frequencies when scanning to large angles in the H-plane. However, we find that the impedances at the upper surface of the array have certain regularity when scanning in the H-plane. The impedances gradually decrease as the scanning angle increases in the H-plane and the reactance parts of the impedances are inductive. Therefore, a new WWCIM layer is proposed. The impedances of the WWCIM layer, seen from down to up, also gradually decrease as the scanning angle increases in the H-plane. But their reactance parts are capacitive. Therefore, in the H-plane, the impedances at the upper surface of the TCDA and the impedances at the lower surface of the WWCIM layer can be well conjugated when scanning to large angles. In the E-plane, because the changes of the port impedances and the WWCIM layer are small within the 70° scanning range, the port impedances can be easily matched. Thus, the impedance matching problem is well solved when scanning at large scanning angles in the H-plane. Finally, a single-polarization array with a bandwidth of 1.02-5.15 GHz (VSWRs <; 2.7) is presented, which can scan up to ±70° in all azimuth planes. The profile of the proposed array is 0.2λ at the lowest working frequency.
21 March 2018 in IEEE Antennas and Wireless Propagation Letters
A low-profile pattern-reconfigurable vertically polarized antenna is proposed. The reconfigurable antenna with a profile of about 0.06 wavelengths can emit three different vertically polarized beams, which are two directional beams and a quasi-bidirectional beam. The overlapped measured band of the three statuses has a bandwidth of 11.3%, which covers the operational bands of EN 302 663 and 802.11p-1609.x standards used in intelligent transportation systems.
22 December 2023 in IEEE Transactions on Microwave Theory and Techniques
The deepening research of physics-informed neural networks (PINNs) demonstrates the advantages of this method to electromagnetic inverse design. Some studies have deeply embedded the physics information into the neural networks, obtaining better solution performance and providing a new way for the PINN electromagnetic inverse design problems. This article explores PINN with embedded analytical models (EAM-PINN) to design waveguide devices. We first develop a multilayer dielectric-loaded rectangular waveguide model and derive its ${{S}_{21}}$ parameter expressions. Considering the inevitable limits of the ${{S}_{21}}$ response achievable by the waveguide model, we propose a method to solve the model bounds based on the interior point method to determine the number of dielectric layers. To improve the solution effect of PINN, we also present a hard constraint method based on the activation function. Then, we embed the ${{S}_{21}}$ parameter expressions, as an ${{S}_{21}}$ analytical model, into the traditional PINN framework, reducing the scale of loss functions. We also theoretically analyze the performance of EAM-PINN and summarize its parameter selection scheme. The EAM-PINN implements three inverse design cases: a known analytical solution retrieving, a bandpass filter, and a dispersive delay line. Finally, we conclude the advantages of EAM-PINN compared to various current methods and validate our inverse design results through simulation. We find that EAM-PINN has high solving efficiency and strong stability, which can realize the inverse design of complex microwave devices, showing the great potential of this method.
13 February 2024 in IEEE Antennas and Wireless Propagation Letters
This letter aims to overcome the challenges faced by physics-informed neural networks (PINNs) in metal structure design. Taking the design of horn antennas as an example, we propose knowledge-embedded PINNs inverse design framework. Normalized Maxwell's equations are employed to address convergence issues caused by differences in magnitudes. Unlike traditional PINNs, we built field component neural networks, inherently satisfying the boundary conditions of the metal structure. At the same time, the boundary conditions of the port and aperture fields are embedded within the neural network using a hard constraint boundary approach. The embedded knowledge further simplifies the loss function. The numerical experiments showcase the inverse design results of the H-plane horn antenna profile under different target aperture field requirements. The results demonstrate that the inverse-designed antennas effectively achieve the super-gain and beam deflection, respectively, validating the feasibility and practical value of the proposed method.