Low-temperature direct ammonia fuel cells (DAFCs) use carbon-neutral ammonia as a fuel, which has attracted increasing attention recently due to ammonia's low source-to-tank energy cost, easy transport and storage, and wide availability. However, current DAFC technologies are greatly limited by the kinetically sluggish ammonia oxidation reaction (AOR) at the anode. Herein, we report an AOR catalyst, in which ternary PtIrZn nanoparticles with an average size of 2.3 ± 0.2 nm were highly dispersed on a binary composite support comprising cerium oxide (CeO2) and zeolitic imidazolate framework-8 (ZIF-8)-derived carbon (PtIrZn/CeO2-ZIF-8) through a sonochemical-assisted synthesis method. The PtIrZn alloy, with the aid of abundant OHad provided by CeO2 and uniform particle dispersibility contributed by porous ZIF-8 carbon (surface area: ∼600 m2 g−1), has shown highly efficient catalytic activity for the AOR in alkaline media, superior to that of commercial PtIr/C. The rotating disk electrode (RDE) results indicate a lower onset potential (0.35 vs. 0.43 V), relative to the reversible hydrogen electrode at room temperature, and a decreased activation energy (∼36.7 vs. 50.8 kJ mol−1) relative to the PtIr/C catalyst. Notably, the PtIrZn/CeO2-ZIF-8 catalyst was assembled with a high-performance hydroxide anion-exchange membrane to fabricate an alkaline DAFC, reaching a peak power density of 91 mW cm−2. Unlike in aqueous electrolytes, supports play a critical role in improving uniform ionomer distribution and mass transport in the anode. PtIrZn nanoparticles on silicon dioxide (SiO2) integrated with carboxyl-functionalized carbon nanotubes (CNT–COOH) were further studied as the anode in a DAFC. A significantly enhanced peak power density of 314 mW cm−2 was achieved. Density functional theory calculations elucidated that Zn atoms in the PtIr alloy can reduce the theoretical limiting potential of *NH2 dehydrogenation to *NH by ∼0.1 V, which can be attributed to a Zn-modulated upshift of the Pt–Ir d-band that facilitates the N–H bond breakage.
28 January 2025 in Journal of Colloid and Interface Science
Hydroxide exchange membrane (HEM) water electrolysis is promising for green hydrogen production due to its low cost and excellent performance. However, HEM often has insufficient stability in strong alkaline solutions, particularly under in-situ electrolysis operation conditions, hindering its commercialization. In this study, we discover that the in-situ stability of HEM is primarily impaired by the locally accumulated heat in HEM due to its low thermal conductivity. Accordingly, we propose highly thermally conductive HEMs with an efficient three-dimensional (3D) thermal diffusion network to promote the in-situ stability of HEM for water electrolysis. Based on the 3D heat conductive network, the thermal conductivity of polymeric HEM is boosted by 32 times and thereby reduce the HEM temperature by up to 4.9 °C in a water electrolyzer at the current density of 1 A cm−2. Thus, the thermally conductive HEM exhibits negligible degradation after 20,000 start/stop cycles and reduces the degradation rate by 6 times compared to the pure polymeric HEM in a water electrolyzer. This study manifests the significance of thermal conductivity of HEM on the durability of water electrolysis, which provides guidelines on the rational design of highly durable HEMs in practical operation conditions for water electrolysis, fuel cells, and beyond.
Transition metal electrocatalysts are deem to be alternatives for the replacement of commercial Pt/C as highly efficient oxygen reduction reaction (ORR) electrocatalysts in the applications of advanced energy conversion/storage technologies. Herein, we reprecipitate hemin on polypyrrole (PPy) modified carbon materials (R-Hm/PPy@C), which boosts up the ORR performances. A high half-wave potential (E1/2) of 0.896 V (vs. RHE) and kinetic current density (JK) of 40.9 mA·cm−2 at 0.80 V (vs. RHE) of R-Hm/PPy@C outperforms these of commercial Pt/C in a 0.1 M KOH electrolyte. Moreover, the direct ammonia fuel cells (DAFC) and zinc-air batteries (ZAB) assembled by R-Hm/PPy@C deliver remarkable peak power densities of 288.4 mW·cm−2 in an electrolyte containing 3 M NH3 and 3 M KOH, and 180.2 mW·cm−2 with a high capacity of 820 mAh·gcat.−1 in a 6 M KOH solution. Such superior electrocatalytic performances are not only due to the synergistic effect of Fe3S4 particles and FeN4 single sites, but also are improved by enriched N-doped C species, further corroborated by theoretical calculations. Overall, this study delivers an efficacious approach to fabricate non-noble metal electrocatalysts (NNMEs) by engineering the synergistic effect of nanoparticles (NPs) and single-atom species with N-enriched dopants towards elevated electrocatalytic activities for energy conversion/storage devices.