NISA NASHRAH

Dr. NISA NASHRAH


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 August 2023 in Materials
Verified
Journal Article
Open access
PDF file
Siti FatimahSiti Fatimah
Siti Fatimah
FHFarah Hazmatulhaq
Farah Hazmatulhaq
YSYujun Sheng
Yujun Sheng
TSTri Suhartono
Tri Suhartono
JOJeong Moo Oh
Jeong Moo Oh
Young Gun KoYoung Gun Ko
Young Gun Ko
This study explores the application of ultrasonic vibration during plasma electrolytic oxidation (PEO) to enhance the corrosion resistance of magnesium (Mg) alloy. To this end, three different ultrasonic frequencies of 0, 40, and 135 kHz were utilized during PEO. In the presence of ultrasonic waves, the formation of a uniform and dense oxide layer on Mg alloys is facilitated. This is achieved through plasma softening, acoustic streaming, and improved mass transport for successful deposition and continuous reforming of the oxide layer. The oxide layer exhibits superior protective properties against corrosive environments due to the increase in compactness. Increasing ultrasonic frequency from 40 to 135 kHz, however, suppresses the optimum growth of the oxide layer due to the occurrence of super-soft plasma swarms, which results in a low coating thickness. The integration of ultrasonic vibration with PEO presents a promising avenue for practical implementation in industries seeking to enhance the corrosion protection of Mg alloys, manipulating microstructures and composition.

25 February 2022 in Membranes
Verified
Journal Article
Open access
PDF file
FKFitri Khoerunnisa
Fitri Khoerunnisa
MNMita Nurhayati
Mita Nurhayati
MSMaman Aulia Surachman
Maman Aulia Surachman
Siti FatimahSiti Fatimah
Siti Fatimah
NNNISA NASHRAH
NISA NASHRAH
POPakorn Opaprakasit
Pakorn Opaprakasit
The effects of benzalkonium chloride (BKC) contents on the structure, properties, and ultrafiltration performance of chitosan-based nanocomposite membranes containing poly(ethylene glycol) and multi-walled carbon nanotube (chitosan/BKC/PEG/CNT) were examined. The membranes were prepared by a mixing solution method and phase inversion before being characterized with microscopic techniques, tensile tests, thermogravimetric analysis, water contact angle, and porosity measurements. The performance of the nanocomposite membranes in regard to permeability (flux) and permselectivity (rejection) was examined. The results show that the incorporation of BKC produced nanocomposite membranes with smaller pore structures and improved physico-chemical properties, such as an increase in porosity and surface roughness (Ra = 45.15 to 145.35 nm and Rq = 53.69 to 167.44 nm), an enhancement in the elongation at break from 45 to 109%, and an enhancement in the mechanical strength from 31.2 to 45.8 MPa. In contrast, a decrease in the membrane hydrophilicity (water contact angle increased from 56.3 to 82.8°) and a decrease in the average substructure pore size from 32.64 to 10.08 nm were observed. The membrane rejection performances toward Bovine Serum Albumin (BSA) increased with the BKC composition in both dead-end and cross-flow filtration processes. The chitosan/BKC/PEG/CNT nanocomposite membranes have great potential in wastewater treatments for minimizing biofouling without reducing the water purification performance.

11 October 2022 in Materials
Verified
Journal Article
Open access
PDF file
Siti FatimahSiti Fatimah
Siti Fatimah
NNNISA NASHRAH
NISA NASHRAH
KTKadir Tekin
Kadir Tekin
Young Gun KoYoung Gun Ko
Young Gun Ko
The present work dealt with the development of a protective and functional oxide layer via one-step plasma electrolytic oxidation (PEO) on pure titanium by employing highly concentrated aluminate solution in a short processing time. A compositional analysis showed that Al2TiO5 active compound was formed successfully by means of Al2O3 incorporation when TiO2 was spontaneously developed with the aid of plasma swarms. The electrochemical performance showed the protective and functional capabilities of the layer, which was attributed to the respective amounts of Al2O3 and Al2TiO5. Such capabilities were achieved in a short processing time, thus reducing the total production cost.

29 June 2021 in Metals
Verified
Journal Article
Open access
PDF file
NNNISA NASHRAH
NISA NASHRAH
RPRosy Amalia Kurnia Putri
Rosy Amalia Kurnia Putri
EAEarly Zahwa Alharissa Alharissa
Early Zahwa Alharissa Alharissa
WZWail Al Zoubi
Wail Al Zoubi
Young Gun KoYoung Gun Ko
Young Gun Ko
In recent years, hybrid organic-inorganic (HOI) materials have attracted massive attention as they combine the unique properties of organic and inorganic compounds. In this review, we focus on the formation of HOI materials and their electrochemical performance that can be controlled by microstructural design depending upon their chemical composition. This overview outlines the recent strategies of preparing HOI materials on metallic surface via wet-electrochemical systems, such as plasma electrolysis (PE) and dip chemical coating (DCC). The corresponding electrochemical behavior for short and long term exposures is also summarized.