yafeng hu

Dr. yafeng hu

teacher student relationship
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
YHyafeng hu
yafeng hu
Yang WeiYang Wei
Yang Wei
SCSi Chen
Si Chen
YYYadong Yan
Yadong Yan
WZWeiyao Zhang
Weiyao Zhang
A timber–lightweight−concrete (TLC) composite beam connected with a ductile connector in which the ductile connector is made of a stainless−steel bolt anchored with nuts at both ends was proposed. The push−out results and bending performance of the TLC composite specimens were investigated by experimental testing. The push−out results of the shear specimens show that shear–slip curves exhibit good ductility and that their failure can be attributed to bolt buckling accompanied by lightweight concrete cracking. Through the bending tests of ten TLC composite beams and two contrast (pure timber) beams, the effects of different bolt diameters on the strengthening effect of the TLC composite beams were studied. The results show that the TLC composite beams and contrast timber beams break on the timber fiber at the lowest edge of the TLC composite beam, and the failure mode is attributed to bending failure, whereas the bolt connectors and lightweight concrete have no obvious breakage; moreover, the ductile bolt connectors show a good connection performance until the TLC composite beams fail. The ultimate bearing capacities of the TLC composite beams increase 2.03–3.5 times compared to those of the contrast beams, while the mid-span maximum deformation decrease nearly doubled.

11 October 2022 in Buildings
Verified
Journal Article
Open access
PDF file
YHyafeng hu
yafeng hu
Yang WeiYang Wei
Yang Wei
LZLonglong Zhao
Longlong Zhao
WZWenhua Zhang
Wenhua Zhang
SCSi Chen
Si Chen
In this paper, C50 high-performance concrete (HPC) containing manufactured sand was prepared. First, three different gradations of aggregates and three different types of admixtures with significant differences in specific surface area, porosity, and water ratios were used to prepare nine groups of concrete mixtures. Second, the effect of the aggregate gradation and admixture on the workability of fresh HPC and compressive strength of hydration-hardened HPC was investigated. Finally, microscopic tests were conducted to examine the hydration product pore structure (mercury injection porosimeter (MIP)), hydration product surface appearance (scanning electron microscope (SEM)), and element qualitative analysis (energy dispersive X-ray spectrometry (EDS)), and the mechanism of the C50 HPC was discussed. The results show that the types of gradation aggregates and admixtures significantly affect the workability and strength of C50 HPC. When the slump of fresh HPC is specified, the workability of the mixture can be controlled by a homemade high-performance lignin sulfonate water reducer. The aggregate gradation biased toward the median of the gradation curve can be used to prepare the C50 HPC. In this paper, the maximum compressive strength of C50 HPC is 58.3 MPa at 90 days. In addition, the microscopic test results show that the composite compound of C50 HPC has a dense hydration product and a high bond strength interface transition zone (ITZ).