In a parallel-connected battery group (PCBG), capacity degradation is usually caused by the inconsistency between a faulty cell and other normal cells, and the inconsistency occurs due to two potential causes: an aging inconsistency fault or a loose contacting fault. In this paper, a novel method is proposed to perform online and real-time capacity fault diagnosis for PCBGs. Firstly, based on the analysis of parameter variation characteristics of a PCBG with different fault causes, it is found that PCBG resistance can be taken as an indicator for both seeking the faulty PCBG and distinguishing the fault causes. On one hand, the faulty PCBG can be identified by comparing the PCBG resistance among PCBGs; on the other hand, two fault causes can be distinguished by comparing the variance of the PCBG resistances. Furthermore, for online applications, a novel recursive-least-squares algorithm with restricted memory and constraint (RLSRMC), in which the constraint is added to eliminate the “imaginary number” phenomena of parameters, is developed and used in PCBG resistance identification. Lastly, fault simulation and validation results demonstrate that the proposed methods have good accuracy and reliability.

According to the intelligent development needs of railway operation and maintenance, turnout maintenance also needs an efficient and intelligent means of detection. It is the main method used to measure the access depth of static contact manually. In order to change the disadvantages of the low efficiency and strong subjectivity of traditional schemes, a low-complexity accurate ranging algorithm of the Mask RCNN is proposed to measure the on–off working parts. Firstly, the Mask RCNN and an interactive iterative method are used to segment the region of interest accurately twice. Secondly, the graph distortion is corrected according to the vertex mapping principle. Finally, the accurate actual distance is calculated through fitting the linear distance transformation equation. Through the secondary segmentation and correction algorithm, the accurate calculation of a small target is completed. The experimental results show that the algorithm can accurately measure the distance of different working parts; the average processing time is 0.8 s/amplitude and the measurement error is ±1 mm.

In recent years, video data have increased in size, which results in enormous transmission pressure. Rate control plays an important role in stabilizing video stream transmissions by balancing the rate and distortion of video compression. To achieve high-quality videos through low-bandwidth transmission, video multi-scale-based end-to-end rate control is proposed. First, to reduce video data, the original video is processed using multi-scale bicubic downsampling as the input. Then, the end-to-end rate control model is implemented. By fully using the temporal coding correlation, a two-branch residual-based network and a two-branch regression-based network are designed to obtain the optimal bit rate ratio and Lagrange multiplier λ for rate control. For restoring high-resolution videos, a hybrid efficient distillation SISR network (HEDS-Net) is designed to build low-resolution and high-resolution feature dependencies, in which a multi-branch distillation network, a lightweight attention LCA block, and an upsampling network are used to transmit deep extracted frame features, enhance feature expression, and improve image detail restoration abilities, respectively. The experimental results show that the PSNR and SSIM BD rates of the proposed multi-scale-based end-to-end rate control are −1.24% and −0.50%, respectively, with 1.82% rate control accuracy.