An improved harmony search algorithm is proposed which is found to be more efficient than the original harmony search algorithm for slope stability analysis. The effectiveness of the proposed algorithm is examined by considering several published cases. The improved harmony search method is applied to slope stability problems with five types of procedure for generating trial slip surfaces. It is demonstrated that the improved harmony search algorithm is efficient and effective for the minimization of factors of safety for various difficult problems, and the method of generating the trial failure surfaces can be important in the minimization process.
The study focuses on the derivation of transformation models for undrained shear strength (su) of Finnish soft sensitive clays. Specific correlation equations for su of Finnish clays are presented in this work for the first time. Field and laboratory measurements from 24 test sites in Finland are exploited for this purpose and a multivariate database is constructed. The multivariate data consist of su from the field vane test, preconsolidation stress, vertical effective stress, liquid limit, plastic limit, natural water content, and sensitivity. The main objective is to evaluate the interdependence of su, consolidation stresses, and index parameters and provide a consistent framework for practical use. The new correlations are established through regression analyses. The constructed framework is further validated by another independent multivariate database of clays from Sweden and Norway as well as by empirical equations for Swedish and Norwegian clays. Existing correlations are evaluated for Finnish and Scandinavian clays. Finally, bias and uncertainties of the new correlations are presented.
The railway network on coastal areas of Finland is predominantly located in soft clay areas. The undrained shear strength of such clays is generally low, highly anisotropic, and rate dependent, and it exhibits post-peak strain softening under undrained conditions. A full-scale failure test was performed by Tampere University of Technology in Perniö, Western Finland, in 2009. A shallow railway embankment built on a soft clay deposit was equipped with a loading structure and loaded to failure in about 30 h. The embankment collapsed 2 h after the last loading step. In this study, data collected from the experiment are used, together with laboratory test results on high-quality samples, to conduct advanced finite element analysis of the Perniö failure test. The NGI-ADPSoft model is used for this purpose, which is capable of simulating the strain-softening behavior of the clay. Even though the observed rate effect is not taken into account in the analyses, the failure load can be predicted reasonably well. Good agreement is also observed for calculated displacements and failure mechanism with experimental observations.