Jacek Kozyra

Dr. Jacek Kozyra

University of Technology and Humanities in Radom
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 February 2022 in Energies
Verified
Journal Article
Open access
PDF file
ALAndriy Lozynskyy
Andriy Lozynskyy
Jacek KozyraJacek Kozyra
Jacek Kozyra
Zbigniew LukasikZbigniew Lukasik
Zbigniew Lukasik
AKAldona Kuśmińska-Fijałkowska
Aldona Kuśmińska-Fijałkowska
AKAndriy Kutsyk
Andriy Kutsyk
LKLidiia Kasha
Lidiia Kasha
The synthesis of a real-time model of the electric mode of an arc steelmaking furnace is shown. This model is based on the method of medium-voltage and can be used to analyze the impact of the arc steelmaking furnace on the supply network at different stages of the melting process at different control systems of the electromechanical electrode movement system, and to create model-predictive control systems of electrode movement, when control using hardware in the loop technology. To implement the chosen method, the dynamic arc resistance was used. The last was obtained on the basis of the averaged experimentally taken volt-ampere characteristics of the arc. In paper was proposed its approximation as a current function and arc length. The simulation results obtained using the created model for different operation modes of the arc steelmaking chipboard for a system with a traditional regulator of the electrode movement system are demonstrated.

26 October 2023 in Energies
Verified
Journal Article
Open access
PDF file
Jacek KozyraJacek Kozyra
Jacek Kozyra
ALAndriy Lozynskyy
Andriy Lozynskyy
Zbigniew LukasikZbigniew Lukasik
Zbigniew Lukasik
AKAldona Kuśmińska-Fijałkowska
Aldona Kuśmińska-Fijałkowska
AKAndriy Kutsyk
Andriy Kutsyk
LKLidiia Kasha
Lidiia Kasha
From the point of view of the synthesis of control influences, arc steelmaking furnaces are complex nonlinear objects with strongly expressed mutual influences. It has been demonstrated that at a given supply voltage, the distribution of the current values of the phase currents in the quasi-steady-state mode makes it possible to estimate the situation in the arc space of an arc steelmaking furnace and identify the value of arc lengths. This dependence is preserved in transient modes. In order to identify arc lengths from the phase currents, it is proposed to use an approach based on the theory of fuzzy sets. The construction of the fuzzy arc length identifier rule base was carried out in two stages: the first stage used data from quasi-steady-state modes and the Wang–Mendel algorithm; the second stage involved adding a new rule to the database if the activity level of the formed rules was lower than the established level α for the data obtained in the dynamic mode. Further optimization of the parameters of the fuzzy identifier for operation in dynamic modes was carried out using the “back-propagation” algorithm. Based on the identified values of arc lengths, a control system for the movement of electrodes in an arc steelmaking furnace was synthesised. The proposed control system makes it possible to eliminate unproductive electrode movements due to changes in the situation in other phases of the arc steelmaking furnace and simplifies the application of modern methods of synthesising a control system for such complex objects. The results obtained in the mathematical model have confirmed the effectiveness of the proposed control system for the movement of electrodes in an arc steelmaking furnace.

28 October 2022 in Energies
Verified
Journal Article
Open access
PDF file
AKAndriy Kutsyk
Andriy Kutsyk
MKMariusz Korkosz
Mariusz Korkosz
Mykola SemeniukMykola Semeniuk
Mykola Semeniuk
PBPiotr Bogusz
Piotr Bogusz
ALAndriy Lozynskyy
Andriy Lozynskyy
Zbigniew LukasikZbigniew Lukasik
Zbigniew Lukasik
The main advantages of multi-winding (multiphase) induction machines include reducing torque ripple, decreasing rotor harmonics losses, reducing the current per phase without increasing the voltage per phase, reducing the current harmonics of the DC voltage source, and high fault tolerance. The authors propose a theoretical description for the harmonic content of the DC-link current, magnetomotive force, and electromagnetic torque of a multi-winding induction machine (IM), and an account of the interaction of the time harmonics for the power supply and the spatial harmonics for winding functions is presented. The proposed theoretical analysis has made it possible to substantiate supply-winding schemes for the compensation of higher harmonics (6th and 12th in the DC-link current and the IM’s electromagnetic torque) and the improvement of the electromagnetic and electromechanical compatibility of the multi-winding machine, which are justified according to the proposed theoretical description. Further, a schematic solution for the multi-winding induction motor with electronic changing of the pole number is proposed to provide a reduction in speed ripples at low rotation speeds. This decrease is ensured by increasing the number of pole pairs and increasing the frequency of the supply voltage. Mathematical models of multi-winding switch control-based induction machines are developed using the method of average voltages in the integration step for an investigation of electromagnetic and electromechanical processes. It is shown that the developed models are distinguished by high speed of response and accuracy. This is confirmed by the comparative analysis using known methods and models in the Matlab environment, as well as a comparison of the simulation results with the known results of physical experiments. The results of mathematical modeling show that the use of a multi-winding IM with appropriate supply-winding schemes stands to significantly reduce the ripples of the IM’s electromagnetic torque and DC-link current in the case of using six-step voltage source inverters. This makes this type of inverter suitable for use in a frequency-controlled electric drive as an alternative to using a PWM inverter, which has a negative influence on the IM’s state.

21 June 2021 in Energies
Verified
Journal Article
Open access
PDF file
ALAndriy Lozynskyy
Andriy Lozynskyy
TPTomasz Perzyński
Tomasz Perzyński
Jacek KozyraJacek Kozyra
Jacek Kozyra
YBYurii Biletskyi
Yurii Biletskyi
LKLidiia Kasha
Lidiia Kasha
The interconnection between optimal control theory and the theory of energy-shaping control is described in our paper. For linear and nonlinear systems, the application of the theory of optimal control for the synthesis of parameters of energy-shaping control matrices is demonstrated in detail. The use of a Riccati equation allows us to form an optimality criterion and to synthesize the energy-shaping control system that provides the desired transient processes. The proposed approach was applied to the synthesis of control influences for electric vehicle subsystems, such as a two-mass system and a permanent magnets synchronous motor. The results of computer simulation studies, as well as those conducted on real experimental installations, are given in this paper.

19 September 2022 in Energies
Verified
Journal Article
Open access
PDF file
Zbigniew OlczykowskiZbigniew Olczykowski
Zbigniew Olczykowski
Jacek KozyraJacek Kozyra
Jacek Kozyra
In Poland, rail transport is powered by the electric system with the use of traction substations that supply the electric traction with DC voltage of 3 kV. The necessity to change the alternating voltage to the constant and changing loads of the substation cause the electric traction to be a recipient, generating a number of disturbances to the network. These disturbances affect the quality of electricity in the power system from which traction substations are supplied, and the power quality in auxiliary and non-traction lines. This article analyzes the measurements of power quality indicators recorded at selected points of the traction substation system. The parameters characterizing the power quality were recorded, among others, in the main lines supplying traction substations, non-traction lines and auxiliary circuits. The presented article is the first in a series of publications related to the assessment of the impact of DC electric traction on the power system. The recorded data will be the basis for computer simulations defining, inter alia, the impact of power supply conditions for traction substations on the power system and to propose methods of reducing disturbances generated by a dynamically changing substation load.

31 August 2021 in Electrical Engineering
Verified
Journal Article
Open access
PDF file
Jacek KozyraJacek Kozyra
Jacek Kozyra
Zbigniew LukasikZbigniew Lukasik
Zbigniew Lukasik
AKAldona Kuśmińska-Fijałkowska
Aldona Kuśmińska-Fijałkowska
PKPaweł Kaszuba
Paweł Kaszuba
Ensuring reliability and continuity of energy supply is the main goal of local governments and distribution companies. The continuity of energy supply means capability of a power grid to supply agreed amount of energy, of specific quality, without power cuts. The expectations concerning the quality of supplied energy and ensuring its continuity are constantly growing, and any power cuts have significant impact on comfort of life and manufacturing and service sector. To increase reliability of energy supply and improve condition of a power grid in the distribution companies, the works are conducted to increase power supply reliability indexes.The main goal of this publication is to present a problem of discontinuity of energy supply and actions aiming at improvement of power supply reliability indexes. An analysis of discontinuity of energy supply presented in the article is based on data obtained from a selected department of a distribution company. Based on actual data, the impact of location of remote-controlled controllers on the value of SAIDI and SAIFI was presented. Four variants of remote control on the sequence of a medium-voltage cable line were analysed.