Flooding is responsible for a significant amount of human misery all over the world every year, causing death, injury, homelessness, displacement, and economic loss.1 The ten costliest floods that occurred between 1980 and 2014 caused the deaths of over 13,000 people and an estimated $187 billion in economic losses.2 The risks to people and the economic impacts of flooding are most severe for urban flooding. The number of floods and the number of properties affected by them are likely to increase in the future due to the impact of climate change and the growing population exposure in floodplains.3
Remotely sensed flood extents obtained in near real-time can be used for emergency flood incident management and as observations for assimilation into flood forecasting models. High-resolution synthetic aperture radar (SAR) sensors have the potential to detect flood extents in urban areas through clouds during both day- and night-time. This paper considers a method for detecting flooding in urban areas by merging near real-time SAR flood extents with model-derived flood hazard maps. This allows a two-way symbiosis, whereby currently available SAR urban flood extent improves future model flood predictions, while flood hazard maps obtained after the SAR overpasses improve the SAR estimate of urban flood extents. The method estimates urban flooding using SAR backscatter only in rural areas adjacent to urban ones. It was compared to an existing method using SAR returns in both rural and urban areas. The method using SAR solely in rural areas gave an average flood detection accuracy of 94% and a false positive rate of 9% in the urban areas and was more accurate than the existing method.
1 October 2018 in Journal of Applied Remote Sensing
Flooding is a major hazard in both rural and urban areas worldwide, but it is in urban areas that the risks to people and the economic impacts are most severe. High-resolution synthetic aperture radar (SAR) sensors are now commonly used for flood detection because of their ability to penetrate the cloud that is often present at times of flood and to image at night-time as well as during the day. In the absence of significant wind or rain, flooded urban areas generally appear dark in an SAR image due to specular reflection from the water surface. A number of active SARs with spatial resolutions as high as 3 m or better have been launched that are capable of detecting urban flooding. They include TerraSAR-X, RADARSAT-2, and the four satellites of the COSMO-SkyMed constellation. The latter is particularly useful because it allows image sequences of urban flooding to be built up with 12- or 24-h revisit intervals. Most recently, the Sentinel-1 constellation has been launched, though the that gives in its normal interferometric wide swath mode have somewhat too coarse a resolution for urban flood detection, making it more suited to detecting rural flooding.
A basic data requirement of a river flood inundation model is a Digital Terrain Model (DTM) of the reach being studied. The scale at which modeling is required determines the accuracy required of the DTM. For modeling floods in urban areas, a high resolution DTM such as that produced by airborne LiDAR (Light Detection And Ranging) is most useful, and large parts of many developed countries have now been mapped using LiDAR. In remoter areas, it is possible to model flooding on a larger scale using a lower resolution DTM, and in the near future the DTM of choice is likely to be that derived from the TanDEM-X Digital Elevation Model (DEM). A variable-resolution global DTM obtained by combining existing high and low resolution data sets would be useful for modeling flood water dynamics globally, at high resolution wherever possible and at lower resolution over larger rivers in remote areas. A further important data resource used in flood modeling is the flood extent, commonly derived from Synthetic Aperture Radar (SAR) images. Flood extents become more useful if they are intersected with the DTM, when water level observations (WLOs) at the flood boundary can be estimated at various points along the river reach. To illustrate the utility of such a global DTM, two examples of recent research involving WLOs at opposite ends of the spatial scale are discussed. The first requires high resolution spatial data, and involves the assimilation of WLOs from a real sequence of high resolution SAR images into a flood model to update the model state with observations over time, and to estimate river discharge and model parameters, including river bathymetry and friction. The results indicate the feasibility of such an Earth Observation-based flood forecasting system. The second example is at a larger scale, and uses SAR-derived WLOs to improve the lower-resolution TanDEM-X DEM in the area covered by the flood extents. The resulting reduction in random height error is significant.
1 January 2023 in Journal of Applied Remote Sensing
Floods are a major natural hazard in many parts of the world and are likely to become more frequent and severe in the future due to climate change and growing urbanization.1 While the majority of a flooded area may often be rural, it is in the urban areas that the risks to people and property are highest.