Biofouling is problematic for the shipping industry and can lead to functional and financial setbacks. One possible means of biofouling prevention is the use of ultraviolet-C (UVC) light. Previous studies have investigated UVC with marine coatings, but the synergistic effect with color and surface material, specifically reflectance, has yet to be determined. This study comprised three parts: UVC and color (red vs. white), UVC and reflectance (stainless steel vs. polycarbonate), and UVC and exposure intervals (weekly intervals and 10 min intervals). There was no variance in the biofouling communities for colored surfaces when exposed to 254 nm UVC. Reflectance studies demonstrated that the surface material plays a role in biofouling settlement. Stainless steel panels had significantly greater macrofouling settlement than polycarbonate, specifically among encrusting bryozoan, tubeworms, and tunicate communities. Panels of both surface materials exposed to indirect UVC significantly differed from controls and those exposed directly to UVC. Exposure intervals were also found to reduce biofouling settlement especially with long frequent intervals (i.e., 10 min/day). UVC can be utilized on various colored surfaces and different surface types, but the effectiveness in preventing biofouling is ultimately determined by the duration and frequency of UVC exposure.
Biofilms are conglomerates of cells, water, and extracellular polymeric substances which can lead to various functional and financial setbacks. As a result, there has been a drive towards more environmentally friendly antifouling methods, such as the use of ultraviolet C (UVC) radiation. When applying UVC radiation, it is important to understand how frequency, and thus dose, can influence an established biofilm. This study compares the impacts of varying doses of UVC radiation on both a monocultured biofilm consisting of Navicula incerta and field-developed biofilms. Both biofilms were exposed to doses of UVC radiation ranging from 1626.2 to 9757.2 and then treated with a live/dead assay. When exposed to UVC radiation, the N. incerta biofilms demonstrated a significant reduction in cell viability compared to the non-exposed samples, but all doses had similar viability results. The field biofilms were highly diverse, containing not only benthic diatoms but also planktonic species which may have led to inconsistencies. Although they are different from each other, these results provide beneficial data. Cultured biofilms provide insight into how diatom cells react to varying doses of UVC radiation, whereas the real-world heterogeneity of field biofilms is useful for determining the dosage needed to effectively prevent a biofilm. Both concepts are important when developing UVC radiation management plans that target established biofilms.
1 September 2024 in Journal of Ecological Engineering
For the marine industry biofouling has a negative reputation. On ship hulls, the accumulation of these unwanted plants and animals can lead to increased drag, fuel consumption, and greenhouse gas emissions. Offshore platforms are also subject to biofouling which can result in corrosion and...
Ultraviolet-C (UV–C) has been considered as a potential tool in the maintenance and prevention of marine biofouling. However, it is unclear how irradiation disturbs biofouling, specifically biofilms, or the duration and frequency needed to reduce or eliminate their growth. The marine diatom, Navicula incerta, was used in a two-part lab study to determine the minimum time between UV-C duty cycling (also known as interval testing) that would result in the reduction and prevention of marine biofilms. The first study assessed the diatom's metabolic activity, morphology, behavior, and recovery to understand the influence of UV-C on the biofilm. Cell viability, biofilm matrixes, and chlorophyll a were significantly reduced immediately following UV-C exposure, yet when exposure was ceased biofilms began to recover. Based on these results, the second study investigated the duty cycle duration required to limit the growth of the cultured biofilm. Duty cycle testing was able to initially deplete cell viability and chlorophyll a; however, in between exposures, recovery was evident. These findings indicate that shorter (10 min; 1.86 J/cm2) doses of UV-C exposures must be applied more frequently than more prolonged doses (60 min; 11.16 J/cm2) to keep biofilm formation minimal. The duty cycles established here also provide a guideline of efficacy for future studies that can be applied to biofilms in both laboratory and the field.
The application of ultraviolet-C irradiation (UV-C) irradiances is being explored to control marine biofilms due to their abundance, influence on macrofouling settlement, and ability to be cultivated in a laboratory setting. Most field and laboratory studies focus on understanding the efficacy of UV-C on biofilms that are formed under static conditions; however, studying biofilm growth in situ under dynamic or flowing conditions can be challenging. This study aims to understand how UV-C influences biofilms grown in the field under different water flow and shear stresses. Natural biofilms were grown on microscope slides positioned within a flow channel, allowing growth without macrofouling. The channel was divided into three sections for testing: high shear (front), medium shear (middle), and low shear (back). The low shear produced thicker and denser biofilms. Biofilms were subjected to pulsing exposures of 30 (5.58 J/cm2), 60 (11.16 J/cm2), and 90 (16.74 J/cm2) minutes, three times a day. Chlorophyll a, a metric used to determine the effectiveness of UV-C, was reduced under all shear stresses and UV-C trials. Community analysis found groupings of specific bacterial species with diatoms, potentially creating a more robust community structure. Findings indicated that UV-C can control biofilm densities even under continuous flow; however, higher doses appear to be optimal for biofilm reduction.
Biofouling, the accumulation of unwanted organisms on submerged assets, presents an ongoing challenge within the maritime industry. Conventional methods to inhibit growth rely on copper-laden (≤75% copper compounds) antifouling coatings. However, the efficacy of these coatings is declining due to the broad emergence of copper-tolerant species. Here, we investigated the mechanisms underlying this decline in antifouling performance. Polyvinyl chloride (PVC) panels coated with a commercial copper ablative paint were deployed in the Chesapeake Bay to collect early-stage biofilms; uncoated PVC panels were deployed as an inert control group. Community profiles of the harvested biofilms were obtained via 16S amplicon sequencing of the V4 and V5 regions. To elucidate genomics information about specific bacteria, primary bacterial colonizers were isolated on marine agar plates and identified through 16S amplicon sequencing and whole genome sequencing. The isolates were subsequently assessed for copper tolerance using copper sulfate (CuSO4) in both marine agar and broth assays. While bacterial tolerance declined with increasing CuSO4 concentrations on agar, tolerance was significantly greater in liquid media and minimum inhibitory concentrations were equal to or above 5 mM CuSO4. Genomic annotation confirmed that this high phenotypic tolerance was driven by active genetic resistance mechanisms. Every isolate harbored at least three copper-related genes (e.g., copA, cueO, and copZ), with highly adaptable species carrying a full spectrum of resistance genes. Ultimately, these findings highlight how the accumulation of metal resistance genes allows bacteria to colonize metal-rich surfaces, paving the way for subsequent macrofouling and coating failure.