Soo Gyung Lee

Dr. Soo Gyung Lee


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 May 2021 in Energies
Verified
Journal Article
Open access
PDF file
JPJin-Cheol Park
Jin-Cheol Park
SPSoo-Hwan Park
Soo-Hwan Park
JKJae-Hyun Kim
Jae-Hyun Kim
SLSoo Gyung Lee
Soo Gyung Lee
GLGeun-Ho Lee
Geun-Ho Lee
Myungseop LimMyungseop Lim
Myungseop Lim
Static eccentricity (SE) is frequently generated by manufacturing processes. As the nonuniformity of the air-gap length is caused by the SE, the torque ripple and cogging torque increase in the motor. This study analyzes the distorted back electromotive force (EMF) and cogging torque due to SE. Further, a motor design considering SE is performed for stable back EMF and low cogging torque. First, the SE was diagnosed and analyzed using the back EMF and cogging torque measured from the test results of the base model. In addition, the rotor position was calculated using the unbalanced back EMF due to the SE. The calculated rotor position is used when analyzing phenomena due to SE and applied to robust design. Subsequently, robust design optimization was performed to improve the unbalanced back EMF and cogging torque due to SE. Using finite element analysis (FEA) considering SE, the shape of the stator was designed based on the base model. The estimated rotor position from the base model was applied to the optimum model to confirm its robustness from SE’s effects. Finally, the base and optimum models were compared through the test results.

20 September 2021 in Journal of Electrical Engineering & Technology
Verified
Journal Article
Closed access
PDF file
DKDae-Kee Kim
Dae-Kee Kim
Dong-Min KimDong-Min Kim
Dong-Min Kim
JPJin-Cheol Park
Jin-Cheol Park
SLSoo Gyung Lee
Soo Gyung Lee
JYJihyung Yoo
Jihyung Yoo
Myungseop LimMyungseop Lim
Myungseop Lim

3 June 2025 in Mathematics
Verified
Journal Article
Open access
PDF file
KCKyoung-Soo Cha
Kyoung-Soo Cha
JKJae-Hyun Kim
Jae-Hyun Kim
SLSoo Gyung Lee
Soo Gyung Lee
MPMin-Ro Park
Min-Ro Park
This paper proposes a high-efficiency design for an external rotor interior permanent magnet synchronous motor (IPMSM) that eliminates the magnetic leakage flux path. The conventional model based on an external rotor surface-mounted permanent magnet synchronous motor (SPMSM) is analyzed using a statistical method. Design directions are derived by comparing efficiencies at two major operating points with different motor characteristics. A V-shaped IPMSM is then proposed to increase the permanent magnet volume and reduce magnetic leakage. Design optimization is conducted using Gaussian process models (GPMs) constructed with a Latin hypercube design (LHD), and the optimal design is determined using a gradient descent algorithm. A prototype is fabricated to confirm manufacturability, and the improved efficiency of the proposed design is experimentally verified. The results demonstrate that the proposed IPMSM significantly outperforms the conventional SPMSM in terms of efficiency across both operating points.

3 June 2021 in Energies
Verified
Journal Article
Open access
PDF file
JKJae-Hyun Kim
Jae-Hyun Kim
KCKyoung-Soo Cha
Kyoung-Soo Cha
SHSung-Woo Hwang
Sung-Woo Hwang
SLSoo Gyung Lee
Soo Gyung Lee
MPMin-Ro Park
Min-Ro Park
Myungseop LimMyungseop Lim
Myungseop Lim
In multi-pole permanent magnets (PMs) such a ring-type PMs, as multi-poles are magnetized in one segment, the ends of each pole are weakly magnetized, which is known as the dead zone. Thus, when analyzing characteristics of the motor with multi-pole PMs, accurate results can be obtained by considering the magnetization distribution. For this reason, this paper proposed an equivalent magnetic circuit (EMC) for external-rotor surface-mounted permanent magnet synchronous motors (SPMSMs) considering the dead zone to analyze the effects of the dead zone on the characteristics of the motor. As the magnetization in the dead zone gradually decreases toward the end of the pole, the magnetization distribution is assumed to have a trapezoidal shape. To describe the magnetization distribution, each pole was divided into several elements, and the equivalent residual magnetic flux density was applied to the elements of the dead zone. Finally, the validity of the proposed EMC was verified by comparing the back electro-motive force and air-gap magnetic flux density obtained by the EMC, finite-element analysis, and test.